- +


+-
Become a Multitool.org charter member!

Author Topic: Smile for the camera (mount)  (Read 1695 times)

Offline Grant Lamontagne

  • Head Turd Polisher
  • Administrator
  • Absolute Zombie Club
  • *
  • Posts: 38,331
  • Country: ca
  • Optimum instrumentum est inter aures
    • Defender Web & Tool
Re: Smile for the camera (mount)
« Reply #15 on: March 24, 2012, 04:37:25 PM »
Its actually a bit ironic- I decided yesterday to go to Mountain Equipment Co Op and buy a Contour Roam video camera but they didn't have any in stock. They offered to order on from the Vancouver store for me but I said I'd just go and buy the thing from one of the other dozen or so stores in town that carry them.  As I was about to walk away I spotted the Steady behind the counter and grabbed it as a consolation prize!  :D

Def

Sent from my MB860 using Tapatalk

Offline J-sews

  • Global Moderator
  • Absolute Zombie Club
  • *
  • Posts: 22,347
  • Country: us
Re: Smile for the camera (mount)
« Reply #16 on: March 25, 2012, 05:01:46 PM »
I played with one at REI today and it wasn't terrible. It actually did ok with my Panasonic GF2 w/20mm lens, which is bigger than what the tool is marketed for. I might buy one with my dividend, but I like my clipped Wave so much that it's hard to look at another MT.


I'll bet they sell a ton of these at places like REI, what with customers there being the perfect target group and all :salute:
In order to be certain of having the right tool for every job.........one must first acquire a lot of tools

Offline Grant Lamontagne

  • Head Turd Polisher
  • Administrator
  • Absolute Zombie Club
  • *
  • Posts: 38,331
  • Country: ca
  • Optimum instrumentum est inter aures
    • Defender Web & Tool
Re: Smile for the camera (mount)
« Reply #17 on: March 25, 2012, 05:27:54 PM »
You say that like it's a bad thing.  I'd rather have Gerber (or any company) mass marketing a decent quality niche tool like this than see a return to the Suspension and it's clones.

I was in Canadian Tire with a friend the other day and he pointed out a Suspension and said "That one looks good!"

I just about kicked him.   :facepalm:

Def

Offline J-sews

  • Global Moderator
  • Absolute Zombie Club
  • *
  • Posts: 22,347
  • Country: us
Re: Smile for the camera (mount)
« Reply #18 on: March 25, 2012, 11:20:46 PM »
Oh I agree, no question. :salute: Its a brilliant bit of niche marketing by Gerber when you think about it. The Steady is just unique-looking enough that wives and girlfriends out looking for gifts for their menfolk will think Now I'm sure he doesn't have one of those already, because I would have remembered it. :) 
In order to be certain of having the right tool for every job.........one must first acquire a lot of tools

Offline Grant Lamontagne

  • Head Turd Polisher
  • Administrator
  • Absolute Zombie Club
  • *
  • Posts: 38,331
  • Country: ca
  • Optimum instrumentum est inter aures
    • Defender Web & Tool
Re: Smile for the camera (mount)
« Reply #19 on: March 26, 2012, 01:06:55 AM »
I know more than a few guys that would actually really like this tool.  Mostly younger guys I'll admit but let's face it, anew tool with a Geritol dispenser aimed at us older guys just doesn't seem like a good idea!  :P

Def

Offline dks

  • No Life Club
  • ******
  • Posts: 4,342
  • Country: cy
  • Why go out for milk when you have a cow at home..
Re: Smile for the camera (mount)
« Reply #20 on: March 26, 2012, 07:14:07 AM »
..., anew tool with a Geritol dispenser aimed at us older guys just doesn't seem like a good idea! .

 :pok: You may want to consider a Victorinox for your age related needs then:
SAKWIKI:
The Cut & Picker Blade with Scraper is only found on a few 58mm size knives. According to information from the factory its sole purpose is to cut the plastic tie used to seal a pill bottle cap, and then to pick the cotton filler out of the bottle



 :tu:
Lingerie League is the only type of football worth watching.

Offline J-sews

  • Global Moderator
  • Absolute Zombie Club
  • *
  • Posts: 22,347
  • Country: us
Re: Smile for the camera (mount)
« Reply #21 on: March 27, 2012, 03:26:28 AM »
 :D
In order to be certain of having the right tool for every job.........one must first acquire a lot of tools

Offline Grant Lamontagne

  • Head Turd Polisher
  • Administrator
  • Absolute Zombie Club
  • *
  • Posts: 38,331
  • Country: ca
  • Optimum instrumentum est inter aures
    • Defender Web & Tool
Re: Smile for the camera (mount)
« Reply #22 on: March 27, 2012, 02:38:05 PM »
When I first read that response I was using my phone and couldn't see the pic.  I thought you were going to post a pic of the Viagra marked Classic!   :ahhh

Def

Offline Grant Lamontagne

  • Head Turd Polisher
  • Administrator
  • Absolute Zombie Club
  • *
  • Posts: 38,331
  • Country: ca
  • Optimum instrumentum est inter aures
    • Defender Web & Tool
Re: Smile for the camera (mount)
« Reply #23 on: March 27, 2012, 06:12:19 PM »
BTW, the main blade isn't locking, so this could be a good option for UK members.  Also, it looks like my big bodied Kodak is under the restrictions.  If you read the scan below you see it's good for 340g and my camera is only 325g.

My cell phone and it's case are over for the suction cup- it's 185g and the max is 170g.

Def

Offline scrappy

  • Turd Bucket
  • No Life Club
  • ******
  • Posts: 2,420
  • Country: spam
Re: Smile for the camera (mount)
« Reply #24 on: April 02, 2012, 06:45:16 AM »
I just got mine. I didn't expect the pliers to be massive like a super tool but I was going for leatherman kick or Gerber flik quality. Overall the tool is okay but the pliers are sub par. Very thin. I retired to use them but due to all the flex I just set them side and used an mp600.  I still think the tripod is a unique idea and I love seeing Gerber out there doing this. I wish leatherman would be as adventurous as Gerber

Offline dks

  • No Life Club
  • ******
  • Posts: 4,342
  • Country: cy
  • Why go out for milk when you have a cow at home..
Re: Smile for the camera (mount)
« Reply #25 on: April 03, 2012, 01:22:41 PM »
Got mine today, so here are some observations:

The quality feels below Victorinox and Leatherman but better than really cheap no brand multitools.
I would say it feels similar to Ganzo Multitools. The movement of the tools feels gritty and the tool could do with some cleaning and oiling.
The handles flex significantly in use; definitely not a heavy use tool.

The pliers are quite thin as seen in the comparison picture with the Dime.

The handles are not even nicely aligned,

and the green rubberised plastic on the tripod legs (or the flaps) seems about to come off.
Tool selection is reasonable though I question the need to include two blades on a tool with limited available space like the Steady (why not Fiskars scissors instead...?).

Also, they could have snuck a pair of tweezers or a pen in the plastic body.

Now the main reason I got this is to use as a camera tripod.

The tripod will support a small camera easily, provided the mount position is in the middle of the camera.

The problem, big problem, is that the pivot point, where the screw mount and the rest of the tool are joined with a metal ball (ball-pivot system) is not very tight, so unless the weight is perfectly distributed the camera will tilt to one side, as seen here with a small Fujifilm.

It is a shame as there is no, visible, adjustment for the tightness to account for heavier cameras or not perfectly centred attachment points. The ball sits in a plastic groove so maybe some systems will be looser than others.

The Steady can support an SLR with a decent sized lens (I tried) without any problem, but the ball-pivot system will not. So the camera goes on but can not be positioned and will just tilt to one side. Proper tripods have ways to secure the pivot system but for some reason nothing like this was integrated in the Steady. Maybe you can stick a matchstick in there to tighten it…
Lingerie League is the only type of football worth watching.

Offline Grant Lamontagne

  • Head Turd Polisher
  • Administrator
  • Absolute Zombie Club
  • *
  • Posts: 38,331
  • Country: ca
  • Optimum instrumentum est inter aures
    • Defender Web & Tool
Re: Smile for the camera (mount)
« Reply #26 on: April 03, 2012, 03:00:19 PM »
Odd- I don't think I've ever seen a camera mounting hole (or whatever it's called) that far off to one side.  I've seen them just off of center a bit, usually to accommodate a battery door or other component, but never all the way to one side.  I have a few tripods that would have issues with that.

Also, you are right about the stiffness of the ball- mine is quite tight, and is almost a pain to pull out.  While I don't have a DSLR to test it, I have little doubt that the ball on mine would hold one up.

Def

Offline 50ft-trad

  • Charter Member
  • Absolutely No Life Club
  • *
  • Posts: 5,588
  • Country: gb
  • I'm not a pessimist, just an experienced optimist!
Re: Smile for the camera (mount)
« Reply #27 on: April 03, 2012, 03:52:49 PM »
My little Panasonic has the mounting hole offset too. I think the smaller cameras have that quite often

Offline dks

  • No Life Club
  • ******
  • Posts: 4,342
  • Country: cy
  • Why go out for milk when you have a cow at home..
Re: Smile for the camera (mount)
« Reply #28 on: April 03, 2012, 04:16:01 PM »
The ball on mine is tight, though still not tight enough to hold an unbalanced camera at an angle.

It worked better with my noticeably heavier Canon small camera, which has a more centrally mounted hole. I used it to take some comparison pictures of the Squirt and the Dime without flash.
I used the Fujifilm to take the pictures.
Lingerie League is the only type of football worth watching.

Offline Grant Lamontagne

  • Head Turd Polisher
  • Administrator
  • Absolute Zombie Club
  • *
  • Posts: 38,331
  • Country: ca
  • Optimum instrumentum est inter aures
    • Defender Web & Tool
Re: Smile for the camera (mount)
« Reply #29 on: June 19, 2012, 03:57:46 PM »
Just an update here- I am almost ready to write my full review of this tool since I've been carrying it a lot lately, but in advance of that, here are some thoughts.

I like it.  It has been a great tool for carrying and using at work.  My job is the kind of thing where I encounter strange circumstances and my job is to document them, which usually means taking pictures.  I also have to be able to deal with issues on the fly, so a multitool and/or SAK is a necessity more than a luxury.  I don't need a tripod often, at least not often enough to carry a dedicated one (although I do have several small, lightweight ones) but I do find myself occasionally wishing I had one.  If I'm carrying the Steady then I do have one and since I'm carrying it primarily as a tool, I'm not carrying extra stuff.  Unlike some gimmick tools on the market (and yes, I fully appreciate the opinion that the Steady is a gimmick) the Steady is actually well enough equipped on it's own with the pliers, screwdrivers, knife blade etc that you really aren't giving up much by carrying it instead of a better equipped model.

Given my type of job I use a camera quite often, although I am not a professional photographer.  I like the Steady because of the occasional times it comes in handy, and I can see how it could be very handy for hiking, camping and general outdoors kind of things as well, just as I said above.  Basically, any time you may want to bring a camera along you may also want to have the Steady, whether it be visiting a park, trail or anywhere else you may want to have pictures from.  And, by carrying it as a tool primarily it also gives you the option to use your smart phone as your camera, even if you don't have a regular camera with you.

Is it for everyone?  Well, if you are the non picture taking type, then no, probably not.  If you like being prepared and want to have the option of using a tripod then it just might well be.  Would you be better off taking a separate tool and tripod?  Possibly, but then you'd also be better off carrying a dedicated knife, a screwdriver set, an electric can opener, a hacksaw etc than just about any multitool.

Def

 

+-Donations

Operational Funds

Keep the Unworkable working!
Donate with PayPal!
May Goal: $275.00
Due Date: May 31
Total Receipts: $306.86
PayPal Fees: $17.42
Net Balance: $289.44
Above Goal: $14.44
Site Currency: USD
105% 
May Donations

+-Community Links

EDC Source
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights
Powered by EzPortal