Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Enki's carry thread - Paint it black - well, mostly

enki_ck · 121 · 13071
« previous next »
Pages: 1 2 3 ... 5   Go Down

hr Offline enki_ck

  • Global Moderator
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,904
  • I may get older but I refuse to grow up.
Enki's carry thread - Paint it black - well, mostly
on: October 16, 2013, 11:25:03 PM
Microbe started it but I've been thinking we should put this part of the forum too more use so here's my contribution to it. :D

My carry doesn't change that often. Most of the gear you see has been my EDC in true sense of the word for months, even years. Some slight variations do happen of course as I give other toys in my gear arsenal a chance to play or try out some new stuff I bought.

Here's what I had on me today. Seems like a lot but it's divided in different pockets and the multitool of the day gets belt carried anyway. ;) For the last few weeks the usual multi (Vic Spirit X) got replaced by the LM Mini that I carry in my home made belt pouch on my belt at 3 o'clock. Chapstick and lighter (switched from mini BIC back to the IMCO Triplex with windy weather coming) get carried in the fifth/watch pocket.

I have three keyrings (see below), car keys, house keys +kees to grandfathers flat, and work keys. The house keys keyring gets carried all the time of course clipped to the corner of my right front pocket. Next to it come the work keyring, the one with the monkey fist lanyard, and car keys are either in my jacket pocket or in my bag. (I'll post the bag carry in a day or so ;) ) The pen, Zebra Telescopic, in black of course :vader: , I clip to the top of the right front pocket horizontally so it's parallel to the belt. I used to carry it next to the keys vertically but I often pulled it out together with my keys and almost lost it a couple of times. The USB, chewing gum, and self made coin purse are dropped at the bottom of the RF pocket.

The small black tin box is my cigarette tin. I roll my own, and as I hate carrying the filters, paper and tobacco, I roll a few for the day in advance. They don't dry out too much. The tin and a pack of tissues I carry in my left front pocket.

The phone I carry in my bag, jacket or back left pocket. I attached my last of the eClipse clips to it's case so I don't have to worry that it will drop out or that someone might swipe it out of my pocket in a crowd. (I wish I had gotten some more of the eClipse clips :-\ )

The wallet gets carried in the right back pocket, and parallel to it is the SAK of the day, which was the Wenger SI today.


The only major change to my EDC recently was a new wallet. I carried the CC LA leather wallet for years and it has served me well. The only problem I had with it was no place to store cash properly. I used to fold the bills three ways and stick them in one of the outside card slots, but I didn't like the fact I had to show everybody how much cash I had on me every time I paid for something. I searched for a better option for quite some time and found it on eBay from India. Size-wise it's similar to the LA wallet but it has the proper cash pocket, three card slots on one side and a ID window on the other. I've been carrying it for about a month now and like it so far. :tu:

Here are a few pictures of it with the IMCO Triplex for size reference. (Yes, I realise the LA wallet would have been a better size reference :doh: )





Now to the keyrings...

House .... work .... car :D


On the house keyring except the keys I carry my DIY Twistick, an iTP A3 EOS AAA flashlight and the MTO prybar I got from Tofty. All carried on my DIY danger, still going strong after a year of use. Not bad for a simple, inexpensive project. :D

The only addition to the work keys is a simple fauxton.

The car keyring is simple too. I don't like hanging to many heavy stuff on there. Just a Vic Rambler and a Spotlight Speck. I reversed the scales on the Rambler though as I feel they should come this way from the factory, so that when you hang the SAK from your keys, the T&T don't hang upside down. ::)

I realise that I have 3 flashlights, one on each keyring, but I don't always (actually almost never) have all of the keyrings on me. And I find it important to have some source of light on me. I'm weird that way. >:D

And with the coming of longer and darker nights I added a "proper" flashlight that I carry in my jacket. The 47s Quark Tactical in the AA configuration. (might change it to the CR123 tube though or the Zebralight SC51)

Oh, yeah, the watch. It's the Seiko 5 automatic (SNK809K2). I carry it on a leather NATO strap, black with black clasps. :vader:

I'll be adding new stuff to this thread with thoughts on possible new acquisitions, my bag carry, tool combos, some use pictures ...

And don't worry, they won't be this long winded. :P

I'd love to hear your comments on it, likes, dislikes, advice. :cheers:

And if some of you would like to start their own thread like this, I'd love to see/read it. :hatsoff:
Merit Badges Must start a thread with a photo of at least five (5) of your watches Must update or add a page on the Multitool.org Multitool Encyclopedia Must update or add a page on SAKWiki Must buy something on EDCSource Must put something in order and provide link to the post. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least 5 different Juice models in your collection

scotland Offline Gareth

  • Admin Team
  • Point Of No Return
  • *
    • Posts: 36,691
Re: Enki's carry thread - Paint it black - well, mostly
Reply #1 on: October 16, 2013, 11:43:02 PM
Some very cool stuff in there mate. :cheers:

I'll have to take a pic or two and start a thread of my own. 8)
Be excellent to each other and always know where your towel is.
Merit Badges Participate  in Challenge thread and post a photo of a Delemont SAK for thirty (30) consecutive days. Must start a thread with a photo of your birth year SAK Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with a photo showing the axe in use Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Must have a review written in the proper format and posted on the Main Site Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns) Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread with a photo of your custom ALOX with scissors Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread showing photos of your outdoor cooking Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

gb Offline AimlessWanderer

  • *
  • Zombie Apprentice
  • ********
    • Posts: 17,517
  • I'm not a pessimist, I'm an experienced optimist!
Re: Enki's carry thread - Paint it black - well, mostly
Reply #2 on: October 17, 2013, 09:11:44 AM
Quote from: Gareth on October 16, 2013, 11:43:02 PM
Some very cool stuff in there mate. :cheers:

I'll have to take a pic or two and start a thread of my own. 8)

Agreed!  :tu: .... on both points  :D


The cantankerous but occasionally useful member, formally known as 50ft-trad

hr Offline styx

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,600
Re: Enki's carry thread - Paint it black - well, mostly
Reply #3 on: October 17, 2013, 11:17:57 AM
Good idea to put a serious flashlight in rotation
Solving problems you didn't know you had in the most obscure way possible

"And now, it's time to hand this over to our tame race axe driver. Some say, he can live in the forest for six months at a time without food, and he knows of a secret tribe of only women where he is their God. All we know is, he's call the Styx!" - TazzieRob
Merit Badges Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the axe in use Start a new thread with photos of your Mora knives in use Test,please ignore Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge.

gb Offline nuphoria

  • Ambidangerous Mistress of Mod
  • Admin Team
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,038
  • I'm not all bad, I'm just drawn that way.
Re: Enki's carry thread - Paint it black - well, mostly
Reply #4 on: October 17, 2013, 03:05:18 PM
I've not taken pics for ages, simply not cricket!

It's great to see what you have going on :cheers:
A dyslexic man walks in to a bra...

All my music for free: http://soundcloud.com/chrissyvandyke

um Offline Mr. Whippy

  • Global Moderator
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 12,170
  • North American Meetup: May13-15 2011
Re: Enki's carry thread - Paint it black - well, mostly
Reply #5 on: October 17, 2013, 04:45:13 PM
I wanted to start my own thread last night.  This is a great idea!  But...

I started watching hockey and well... :oops:

es Offline microbe

  • *
  • No Life Club
  • ******
    • Posts: 2,307
  • Yersinia Pestis & Campylobacter Jejuni!
Re: Enki's carry thread - Paint it black - well, mostly
Reply #6 on: October 17, 2013, 06:29:13 PM
That's a nice system you got going there Enki! Cool stuff! Sure, it touches borderline - I need a bag -  but I guess that how most of us are. Stuffed pockets is probably be the norm round here :)
If I have to nitpick, maybe you should find a black multi-sheath and replace the brown one you got at the moment? + that flashlight that was suggested, sure you got some room left somewhere for that!
Looking forward to see updates in due time!

Thanks for sharing.


Once you go black you never go back
@blackdiamonds_42
Merit Badges Start a thread with photos of at least 1 MTO branded tool in your collection

hr Offline enki_ck

  • Global Moderator
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,904
  • I may get older but I refuse to grow up.
Re: Enki's carry thread - Paint it black - well, mostly
Reply #7 on: October 17, 2013, 06:54:56 PM
Thanks for the kind words, guys and gal. :cheers:

Now let's see your setups. :D
Merit Badges Must start a thread with a photo of at least five (5) of your watches Must update or add a page on the Multitool.org Multitool Encyclopedia Must update or add a page on SAKWiki Must buy something on EDCSource Must put something in order and provide link to the post. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least 5 different Juice models in your collection

hr Offline enki_ck

  • Global Moderator
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,904
  • I may get older but I refuse to grow up.
Re: Enki's carry thread - Paint it black - well, mostly
Reply #8 on: October 17, 2013, 07:06:34 PM
@Microbe

The flashlight is already in the jacket, and you can see it in the first pic under the watch. I love the lego-ability of it. :D Same head and tail switch can be used with a variety of different bodies/battery configurations. I have 2xAA, 1xAAA and 1xCR123 bodies for it.



I switched it to the CR123 body today as I use it with a AW RCR123 battery for more output. I'll have to buy some AW 14500 batteries though to keep it AA compatible.

You can see the 47s in the CR123 configuration is very close in size to the Zebralight in AA. I like carrying flashlights with a clicky switch in the jacket, but pocket time is reserved for the twisties. ;)



And the pouch I made myself. There's a link to it in the first post. So I only have to find some black leather. :)
« Last Edit: October 17, 2013, 07:14:54 PM by enki_ck »
Merit Badges Must start a thread with a photo of at least five (5) of your watches Must update or add a page on the Multitool.org Multitool Encyclopedia Must update or add a page on SAKWiki Must buy something on EDCSource Must put something in order and provide link to the post. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least 5 different Juice models in your collection

es Offline microbe

  • *
  • No Life Club
  • ******
    • Posts: 2,307
  • Yersinia Pestis & Campylobacter Jejuni!
Re: Enki's carry thread - Paint it black - well, mostly
Reply #9 on: October 17, 2013, 07:35:31 PM
Dang that is a nice custom-able light! Lego light seems a good description.
And a nice Job on the sheath. I wish I was that handy.
Once you go black you never go back
@blackdiamonds_42
Merit Badges Start a thread with photos of at least 1 MTO branded tool in your collection

de Offline Dr. Bahn

  • Sr. Member
  • ****
    • Posts: 390
Re: Enki's carry thread - Paint it black - well, mostly
Reply #10 on: October 17, 2013, 09:38:27 PM
That is a very nice EDC, enki!  :tu: I especially like the Mini Tool.  :D

hr Offline enki_ck

  • Global Moderator
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,904
  • I may get older but I refuse to grow up.
Re: Enki's carry thread - Paint it black - well, mostly
Reply #11 on: October 17, 2013, 09:48:54 PM
Quote from: Dr. Bahn on October 17, 2013, 09:38:27 PM
That is a very nice EDC, enki!  :tu: I especially like the Mini Tool.  :D

I like it too. ;) I wouldn't have it without your help. :cheers:
Merit Badges Must start a thread with a photo of at least five (5) of your watches Must update or add a page on the Multitool.org Multitool Encyclopedia Must update or add a page on SAKWiki Must buy something on EDCSource Must put something in order and provide link to the post. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least 5 different Juice models in your collection

de Offline Dr. Bahn

  • Sr. Member
  • ****
    • Posts: 390
Re: Enki's carry thread - Paint it black - well, mostly
Reply #12 on: October 17, 2013, 09:56:43 PM
That is not worth mentioning, buddy. I am glad I could help.  :cheers:

de Offline Dr. Bahn

  • Sr. Member
  • ****
    • Posts: 390
Re: Enki's carry thread - Paint it black - well, mostly
Reply #13 on: October 17, 2013, 10:02:13 PM
Quote from: enki_ck on October 16, 2013, 11:25:03 PM

My carry doesn't change that often. Most of the gear you see has been my EDC in true sense of the word for months, even years. Some slight variations do happen of course as I give other toys in my gear arsenal a chance to play or try out some new stuff I bought.

Same here (unfortunately). Most of my EDC gear never really changes. Only my knife and/or tool changes every few days or weeks. Boring, I know...  :facepalm:

fr Offline Whoey

  • Administrator
  • *
  • Zombie Apprentice
  • *
    • Posts: 12,840
  • I am geek, hear me code
Re: Enki's carry thread - Paint it black - well, mostly
Reply #14 on: October 18, 2013, 02:56:23 PM
I have quite a few "mostly" black things I used to carry... now not so much... I must find a moment for pics...
The difficult we do immediately, the impossible takes a little longer.
Merit Badges Must start a thread with a photo of at least five (5) of your watches

hr Offline enki_ck

  • Global Moderator
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,904
  • I may get older but I refuse to grow up.
Re: Enki's carry thread - Paint it black - well, mostly
Reply #15 on: October 24, 2013, 06:28:05 PM
A very good SAK day today. :mail:

I got the package in from the cheap UK SAKs lot. Only took 5 days to arrive. :D





Now I have to fight the urge to order a SwissChamp or WorkChamp. Bargain prices but I know I wouldn't use them.

The front scale is a bit scratched up though, back is fine. :-\ Not a big problem as I plan on switching the scales to black plus ones anyways and at that price I'm still amazed I actually got a Cybertool. :D



And while I'm in macro (using the jewelers loupe actually :whistle: ) a nice close up of the shield.

Merit Badges Must start a thread with a photo of at least five (5) of your watches Must update or add a page on the Multitool.org Multitool Encyclopedia Must update or add a page on SAKWiki Must buy something on EDCSource Must put something in order and provide link to the post. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least 5 different Juice models in your collection

hr Offline enki_ck

  • Global Moderator
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,904
  • I may get older but I refuse to grow up.
Re: Enki's carry thread - Paint it black - well, mostly
Reply #16 on: October 24, 2013, 06:44:27 PM
And the package from Thomas/lowtech also arrived today.

A Wenger SS Traveler to replace the red celidor scaled one I've been carrying.





And the Richartz picnic knife.

I think this might get to become a permanent part of my carry as my "clean knife", the knife that I'll use if I want to cut some food stuff. :D

Its built quality is very good.








The knife is kept together by the cutout that you see on the fork. If you open up the blade, the knife is firm, but if you open up the fork, you can slide the two halves apart and use the two as a proper knife and fork set. :2tu: The corkscrew is a 5-turn one so it won't hold the eyeglass screwdriver, but that shouldn't be a requirement for a picnic knife anyways, right? :D



The reverse tang stamp.



And the set ready for use. ;)

Merit Badges Must start a thread with a photo of at least five (5) of your watches Must update or add a page on the Multitool.org Multitool Encyclopedia Must update or add a page on SAKWiki Must buy something on EDCSource Must put something in order and provide link to the post. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least 5 different Juice models in your collection

us Offline detron

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,546
  • Tool Carrying Linux User
Re: Enki's carry thread - Paint it black - well, mostly
Reply #17 on: October 24, 2013, 06:52:11 PM
Quote from: enki_ck on October 24, 2013, 06:44:27 PM
And the package from Thomas/lowtech also arrived today.

A Wenger SS Traveler to replace the red celidor scaled one I've been carrying.

(Image removed from quote.)
(Image removed from quote.)
(Image removed from quote.)

And the Richartz picnic knife. (Image removed from quote.)

I think this might get to become a permanent part of my carry as my "clean knife", the knife that I'll use if I want to cut some food stuff. :D

Its built quality is very good.

(Image removed from quote.)
(Image removed from quote.)
(Image removed from quote.)
(Image removed from quote.)
(Image removed from quote.)
(Image removed from quote.)

The knife is kept together by the cutout that you see on the fork. If you open up the blade, the knife is firm, but if you open up the fork, you can slide the two halves apart and use the two as a proper knife and fork set. :2tu: The corkscrew is a 5-turn one so it won't hold the eyeglass screwdriver, but that shouldn't be a requirement for a picnic knife anyways, right? :D

(Image removed from quote.)

The reverse tang stamp.

(Image removed from quote.)

And the set ready for use. ;)

(Image removed from quote.)


wow, I really like that Richartz picnic knife
If I can help, let me know 
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must put something in order and provide link to the post. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with pictures of a Fish Scaler in use Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread demonstrating paracord knot tying Must start a thread with a photo of at least five (5) of your watches Must buy something on EDCSource

pt Offline pfrsantos

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,214
  • Oxygen and magnesium toghether?! OMg!
Re: Enki's carry thread - Paint it black - well, mostly
Reply #18 on: October 24, 2013, 07:12:34 PM
Quote from: enki_ck on October 24, 2013, 06:28:05 PM
A very good SAK day today. :mail:

I got the package in from the cheap UK SAKs lot. Only took 5 days to arrive. :D


I've looked around UK sites and they're not very cheap. Mind if I ask where you got these from?
  :)
________________________________
It is just a matter of time before they add the word “Syndrome” after my last name.

I don't have OCD, I have OCDEFGHIJKLMNOPQRSTUVWXYZ.

I'd give my right arm to be ambidextrous.

Eff the ineffable, scrut the inscrutable.

IYCRTYSWTMTFOT


hr Offline enki_ck

  • Global Moderator
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,904
  • I may get older but I refuse to grow up.
Re: Enki's carry thread - Paint it black - well, mostly
Reply #19 on: October 24, 2013, 07:17:44 PM
Quote from: pfrsantos on October 24, 2013, 07:12:34 PM
Quote from: enki_ck on October 24, 2013, 06:28:05 PM
A very good SAK day today. :mail:

I got the package in from the cheap UK SAKs lot. Only took 5 days to arrive. :D


I've looked around UK sites and they're not very cheap. Mind if I ask where you got these from?
  :)

Might make you spend money. You've been warned. :P

http://forum.multitool.org/index.php?topic=47860.0
Merit Badges Must start a thread with a photo of at least five (5) of your watches Must update or add a page on the Multitool.org Multitool Encyclopedia Must update or add a page on SAKWiki Must buy something on EDCSource Must put something in order and provide link to the post. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least 5 different Juice models in your collection

pt Offline pfrsantos

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,214
  • Oxygen and magnesium toghether?! OMg!
Re: Enki's carry thread - Paint it black - well, mostly
Reply #20 on: October 24, 2013, 07:22:23 PM
Quote from: enki_ck on October 24, 2013, 07:17:44 PM
Quote from: pfrsantos on October 24, 2013, 07:12:34 PM
Quote from: enki_ck on October 24, 2013, 06:28:05 PM
A very good SAK day today. :mail:

I got the package in from the cheap UK SAKs lot. Only took 5 days to arrive. :D


I've looked around UK sites and they're not very cheap. Mind if I ask where you got these from?
  :)

Might make you spend money. You've been warned. :P

http://forum.multitool.org/index.php?topic=47860.0
If it happens, I'll just blame the 2nd guy who posted in that thread...

 :ahhh
________________________________
It is just a matter of time before they add the word “Syndrome” after my last name.

I don't have OCD, I have OCDEFGHIJKLMNOPQRSTUVWXYZ.

I'd give my right arm to be ambidextrous.

Eff the ineffable, scrut the inscrutable.

IYCRTYSWTMTFOT


us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,284
  • Wooooo!
Re: Enki's carry thread - Paint it black - well, mostly
Reply #21 on: October 24, 2013, 07:44:50 PM
Ah, that's a really cool setup idea for a knife.  I like it Enki :tu: 
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your birth year SAK Must start a thread with a photo of your EDC watch Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

hr Offline enki_ck

  • Global Moderator
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,904
  • I may get older but I refuse to grow up.
Re: Enki's carry thread - Paint it black - well, mostly
Reply #22 on: October 24, 2013, 07:51:48 PM
Quote from: pfrsantos on October 24, 2013, 07:22:23 PM
Quote from: enki_ck on October 24, 2013, 07:17:44 PM
Quote from: pfrsantos on October 24, 2013, 07:12:34 PM
Quote from: enki_ck on October 24, 2013, 06:28:05 PM
A very good SAK day today. :mail:

I got the package in from the cheap UK SAKs lot. Only took 5 days to arrive. :D


I've looked around UK sites and they're not very cheap. Mind if I ask where you got these from?
  :)

Might make you spend money. You've been warned. :P

http://forum.multitool.org/index.php?topic=47860.0
If it happens, I'll just blame the 2nd guy who posted in that thread...

 :ahhh

We devided it. I'm to blame for the international packages and he for the UK ones. ;)
Merit Badges Must start a thread with a photo of at least five (5) of your watches Must update or add a page on the Multitool.org Multitool Encyclopedia Must update or add a page on SAKWiki Must buy something on EDCSource Must put something in order and provide link to the post. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least 5 different Juice models in your collection

pt Offline pfrsantos

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,214
  • Oxygen and magnesium toghether?! OMg!
Re: Enki's carry thread - Paint it black - well, mostly
Reply #23 on: October 24, 2013, 07:57:27 PM
OK, now I got something to write about in "What do we have on the way" and "What's your latest SAK"...

 :whistle:

I'll be a Hero in no time!
 :D :D
________________________________
It is just a matter of time before they add the word “Syndrome” after my last name.

I don't have OCD, I have OCDEFGHIJKLMNOPQRSTUVWXYZ.

I'd give my right arm to be ambidextrous.

Eff the ineffable, scrut the inscrutable.

IYCRTYSWTMTFOT


hr Offline enki_ck

  • Global Moderator
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,904
  • I may get older but I refuse to grow up.
Re: Enki's carry thread - Paint it black - well, mostly
Reply #24 on: October 24, 2013, 08:00:15 PM
Quote from: pfrsantos on October 24, 2013, 07:57:27 PM
OK, now I got something to write about in "What do we have on the way" and "What's your latest SAK"...

 :whistle:

I'll be a Hero in no time!
 :D :D

:oops:


:D

What did you order?
Merit Badges Must start a thread with a photo of at least five (5) of your watches Must update or add a page on the Multitool.org Multitool Encyclopedia Must update or add a page on SAKWiki Must buy something on EDCSource Must put something in order and provide link to the post. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least 5 different Juice models in your collection

pt Offline pfrsantos

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,214
  • Oxygen and magnesium toghether?! OMg!
Re: Enki's carry thread - Paint it black - well, mostly
Reply #25 on: October 25, 2013, 11:23:40 AM
I'm thinking about the SwissChamp and CyberTool. Are these really original Victorinox Swiss Army Knives?! Not Victolinox Swiss Almy Knives?...
I made a trial order, just to see how much for mail costs. £4 and still got a rebate on the SAKs price.
 :o :o :o :o

________________________________
It is just a matter of time before they add the word “Syndrome” after my last name.

I don't have OCD, I have OCDEFGHIJKLMNOPQRSTUVWXYZ.

I'd give my right arm to be ambidextrous.

Eff the ineffable, scrut the inscrutable.

IYCRTYSWTMTFOT


pt Offline pfrsantos

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,214
  • Oxygen and magnesium toghether?! OMg!
Re: Enki's carry thread - Paint it black - well, mostly
Reply #26 on: October 25, 2013, 04:40:06 PM
Well, I'll soon see for myself...
 :facepalm:

Waiting for them in the mail... Enki, I Kirk you for this!!!
 :twak:


Edit: strange I tried to write b.l.a.m.e and the site changed it to Kirk! Smurfing strange!
 :think: ???
________________________________
It is just a matter of time before they add the word “Syndrome” after my last name.

I don't have OCD, I have OCDEFGHIJKLMNOPQRSTUVWXYZ.

I'd give my right arm to be ambidextrous.

Eff the ineffable, scrut the inscrutable.

IYCRTYSWTMTFOT


fr Offline Whoey

  • Administrator
  • *
  • Zombie Apprentice
  • *
    • Posts: 12,840
  • I am geek, hear me code
Re: Enki's carry thread - Paint it black - well, mostly
Reply #27 on: October 25, 2013, 04:44:20 PM
That Richartz picnic knife is rather cool!
The difficult we do immediately, the impossible takes a little longer.
Merit Badges Must start a thread with a photo of at least five (5) of your watches

hr Offline enki_ck

  • Global Moderator
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,904
  • I may get older but I refuse to grow up.
Re: Enki's carry thread - Paint it black - well, mostly
Reply #28 on: October 25, 2013, 07:19:21 PM
Quote from: pfrsantos on October 25, 2013, 04:40:06 PM
Well, I'll soon see for myself...
 :facepalm:

Waiting for them in the mail... Enki, I Kirk you for this!!!
 :twak:


Edit: strange I tried to write b.l.a.m.e and the site changed it to Kirk! Smurfing strange!
 :think: ???

:D

Merit Badges Must start a thread with a photo of at least five (5) of your watches Must update or add a page on the Multitool.org Multitool Encyclopedia Must update or add a page on SAKWiki Must buy something on EDCSource Must put something in order and provide link to the post. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least 5 different Juice models in your collection

es Offline microbe

  • *
  • No Life Club
  • ******
    • Posts: 2,307
  • Yersinia Pestis & Campylobacter Jejuni!
Re: Enki's carry thread - Paint it black - well, mostly
Reply #29 on: October 25, 2013, 08:03:32 PM
Bidding on a used Cybertool now.  :facepalm:
Thanks Enki.
Once you go black you never go back
@blackdiamonds_42
Merit Badges Start a thread with photos of at least 1 MTO branded tool in your collection

Pages: 1 2 3 ... 5   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $122.41
PayPal Fees: $6.85
Net Balance: $115.56
Below Goal: $184.44
Site Currency: USD
39% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal