Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Skinth Loadout Thread!

kkokkolis · 589 · 100972

us Offline Hiodro

  • Full Member
  • ***
    • Posts: 121
Re: Skinth Loadout Thread!
Reply #270 on: February 02, 2016, 06:12:08 AM
It's coming up on a month since I ordered a catch all
Getting excited
Will I get an email before it's shipped or does it just arrive?
Once it comes I will need ideas on how to fill from all of you guys.
I have a Leatherman surge, rebar, wave, and a super tool 300. I can also solve 3x3x3, 2x2x2, and 2x2x4 rubix cubes.


de Offline lowtech

  • No Life Club
  • ******
    • Posts: 4,799
Re: Skinth Loadout Thread!
Reply #271 on: February 03, 2016, 06:57:45 PM
I browsed the thread lazily and did not find a pic of a MP 600 BN in a fitting skinth. Can anybody provide a Pic of a BN MP 600 in a skinny Skinth? I don´t need much extra room apart from teh MT, but my (3rd?) Gerber sheath is wearing out....


us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,765
Re: Skinth Loadout Thread!
Reply #272 on: February 03, 2016, 09:05:11 PM
I browsed the thread lazily and did not find a pic of a MP 600 BN in a fitting skinth. Can anybody provide a Pic of a BN MP 600 in a skinny Skinth? I don´t need much extra room apart from teh MT, but my (3rd?) Gerber sheath is wearing out....

Sorry no picture but I know the BN and NN MP 600s fit in different skinths.


au Offline Rossko07

  • Sr. Member
  • ****
    • Posts: 321
Re: Skinth Loadout Thread!
Reply #273 on: March 10, 2016, 12:35:11 AM
Went to change up my skinth load out last night. My usual work carry is a surge in a xl shield. Went to put in a leatherman oht and the bloody thing hardly fits. I could only manage the small diameter of a d25a in one side pocket with the oht in. Also closing the flap with two press studs was quite difficult.

Does anyone else carry an oht in a skinth that has had this issue?


Offline nja4k

  • Newbie
  • *
    • Posts: 14
Re: Skinth Loadout Thread!
Reply #274 on: March 15, 2016, 06:35:27 PM
That's why I prefer Velcro to the snaps.
what if you flipped the tool around ?


us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,765
Re: Skinth Loadout Thread!
Reply #275 on: March 25, 2016, 02:41:38 AM
Uh oh my Wave sheath is falling apart. Guess it might be time soon for a Skinth, darn.

(Image removed from quote.)

No way this can be fixed with some scissors and a lighter. Hate to do it but a new Skinth seems to be the only logical answer.  :whistle:

Made this post while I was in Afghanistan last year or maybe two years ago.

Yeah so I still am limping along with that same old LM sheath.




Sigh.


au Offline Rossko07

  • Sr. Member
  • ****
    • Posts: 321
Re: Skinth Loadout Thread!
Reply #276 on: March 29, 2016, 10:00:38 AM
That's why I prefer Velcro to the snaps.
what if you flipped the tool around ?

Have tried different configurations but the OHT is actually just a tad taller than a surge and is wider also due to the handles not being able to close because of the sliding design. A leatherman OHT is really not designed to fit in a XL shield. You would want to go something bigger in my opinion if looking at a skinth or go with the leatherman sheath. I prefer not to use velcro as in my work environment it just doesn't last.


us Offline tallowwaters

  • Full Member
  • ***
    • Posts: 114
Re: Skinth Loadout Thread!
Reply #277 on: April 03, 2016, 05:15:26 PM
Uh oh my Wave sheath is falling apart. Guess it might be time soon for a Skinth, darn.

(Image removed from quote.)

No way this can be fixed with some scissors and a lighter. Hate to do it but a new Skinth seems to be the only logical answer.  :whistle:

Made this post while I was in Afghanistan last year or maybe two years ago.

Yeah so I still am limping along with that same old LM sheath.




Sigh.

While I don't have a spare Skinth, I would be happy to send you a new Leatherman sheath.


us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,765
Re: Skinth Loadout Thread!
Reply #278 on: April 15, 2016, 04:20:42 AM
Uh oh my Wave sheath is falling apart. Guess it might be time soon for a Skinth, darn.

(Image removed from quote.)

No way this can be fixed with some scissors and a lighter. Hate to do it but a new Skinth seems to be the only logical answer.  :whistle:

Made this post while I was in Afghanistan last year or maybe two years ago.

Yeah so I still am limping along with that same old LM sheath.




Sigh.

While I don't have a spare Skinth, I would be happy to send you a new Leatherman sheath.

Thanks for the offer but I will make this one work until I get off my lazy procrastinating butt and order a Shield.


us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,765
Re: Skinth Loadout Thread!
Reply #279 on: April 30, 2016, 04:15:25 PM
I have a picture request.

Anyone have a Lumintop Tool flashlight and a large Shield?

Would love to see if the Tool will fit in the side pocket.

Thanks.


au Offline PPCAPache

  • Sr. Member
  • ****
    • Posts: 295
Re: Skinth Loadout Thread!
Reply #280 on: June 05, 2016, 03:10:44 AM
Was testing out my Skinth Magnum for work carry.

1) Leatherman Surge v2
2) Spyderco Delica 4
3) Fenix E12
4) Victorinox Alex Pioneer
5) Leatherman Bit card
6) Leatherman Bit extender
7) TEC Centipede



Sent from my Huawei Mate 8 via Tapatalk
« Last Edit: June 05, 2016, 03:11:47 AM by PPCAPache »
Founder & Chief UAV Pilot at Elevated Drone Control Zone

Rotation EDC: LM MUT, LM OHT, Fenix LD12 / LD22, Benchmade Mini Griptilian, Bit Card, Bit Extender, TEC Ti-Pry Bar, Garmin Tactix Delta, LM Tread LT, iPhone XS Max, iPad Pro (2020) 12.9”,

Other EDC: LM Surge, LM Wave, LM Wave BO, Skeletool & Skeletool KBX Coyote Tan, The RIT [Rapid Intervention Tool], Zippo Lighter,


au Offline PPCAPache

  • Sr. Member
  • ****
    • Posts: 295
Re: Skinth Loadout Thread!
Reply #281 on: June 09, 2016, 02:29:40 PM
Tonight's carry - Skinth Mondo Shield with my Leatherman Surge v2, Fenix E12, Victorinox Alox Pioneer, Bit card, Bit Extender and TEC Centipede.



Sent from my Huawei Mate 8 via Tapatalk
Founder & Chief UAV Pilot at Elevated Drone Control Zone

Rotation EDC: LM MUT, LM OHT, Fenix LD12 / LD22, Benchmade Mini Griptilian, Bit Card, Bit Extender, TEC Ti-Pry Bar, Garmin Tactix Delta, LM Tread LT, iPhone XS Max, iPad Pro (2020) 12.9”,

Other EDC: LM Surge, LM Wave, LM Wave BO, Skeletool & Skeletool KBX Coyote Tan, The RIT [Rapid Intervention Tool], Zippo Lighter,


us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,765
Re: Skinth Loadout Thread!
Reply #282 on: June 11, 2016, 07:32:53 PM
Sigh.

Still waiting for my Large Shield.


ca Offline sabesh

  • Newbie
  • *
    • Posts: 14
Re: Skinth Loadout Thread!
Reply #283 on: June 13, 2016, 11:23:00 PM
I have a picture request.

Anyone have a Lumintop Tool flashlight and a large Shield?

Would love to see if the Tool will fit in the side pocket.

Thanks.
It fits perfectly.


Sent from my Nexus 6P using Tapatalk



us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,765
Re: Skinth Loadout Thread!
Reply #284 on: June 15, 2016, 01:20:36 AM
I have a picture request.

Anyone have a Lumintop Tool flashlight and a large Shield?

Would love to see if the Tool will fit in the side pocket.

Thanks.
It fits perfectly.
(Image removed from quote.)

Sent from my Nexus 6P using Tapatalk

Sweet!

What MT is that?


ca Offline sabesh

  • Newbie
  • *
    • Posts: 14
Re: Skinth Loadout Thread!
Reply #285 on: June 15, 2016, 04:19:46 AM
I have a picture request.

Anyone have a Lumintop Tool flashlight and a large Shield?

Would love to see if the Tool will fit in the side pocket.

Thanks.
It fits perfectly.
(Image removed from quote.)

Sent from my Nexus 6P using Tapatalk

Sweet!

What MT is that?
It's a Leatherman Charge TTi.

Cheers.

Sent from my Nexus 6P using Tapatalk



de Offline Josh613

  • Full Member
  • ***
    • Posts: 170
Re: Skinth Loadout Thread!
Reply #286 on: October 31, 2016, 09:54:39 PM
Tweaked the M7 Toollet contents




4" Bahco adjustable, Mini Sharpie, 2mm flat driver and a Victorinox bit kit and driver.  Makes a great pocket toolkit to supplement a multi at work.

Wow could really use one of those. Do you still use this?? Are the contents the same?


wales Offline hiraethus

  • Admin Team
  • *
  • Absolutely No Life Club
  • *
    • Posts: 6,964
  • I brake for cake
Re: Skinth Loadout Thread!
Reply #287 on: November 01, 2016, 12:04:39 PM
Changed it a bit:

Got a bit kit, Pocketwrench knockoff, bit extender, folding craft knife and some duct tape in there.  I swap the bit set for the Vic one if I'm carrying a Spirit.


de Offline Josh613

  • Full Member
  • ***
    • Posts: 170
Re: Skinth Loadout Thread!
Reply #288 on: November 01, 2016, 04:22:19 PM
Changed it a bit:

Got a bit kit, Pocketwrench knockoff, bit extender, folding craft knife and some duct tape in there.  I swap the bit set for the Vic one if I'm carrying a Spirit.
Nifty wee knife


us Offline pa_strunk

  • *
  • *
  • No Life Club
  • ******
    • Posts: 1,644
  • MAJ/APA
Re: Skinth Loadout Thread!
Reply #289 on: November 09, 2016, 11:57:10 PM
Finally got my Skinth Mondo Sheild and the wait was well worth it. I've tried to make it as diverse as possible so my load out includes.

1. Black Oxide Leatherman Surge v2
2. Leatherman Bit Kit
3. Leatherman Bit Extender
4. Leatherman T-Shank Wood/Metal/Diamond File as well as multiple T-Shank Wood, Metal, Carbide, PVC, Plastic, and Multi Surface Saws
5. Topeak Rocket Ratchet
6. Pocketwrench II
7. Gerber Artifact
8. Sog Firesteel/Sharpener Accessory
9. Victorinox Toothpick & Tweezers
10. Victorinox Compass/Ruler, Magnifying Glass, and Thermometer
11. Maglite Triple A Flashlight
12. Zebra Telescopic Pen Stylus

* IMG_2509.jpg (Filesize: 19.23 KB)
« Last Edit: November 10, 2016, 12:59:46 AM by pa_strunk »
"Every generation has the obligation to free men's minds for a look at new worlds, to look out from a higher plateau than the last generation." Ellison Onizuka


ca Offline BCNZ

  • *
  • Hero Member
  • *****
    • Posts: 522
Re: Skinth Loadout Thread!
Reply #290 on: November 15, 2016, 06:12:01 PM




hr Offline styx

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,575
Re: Skinth Loadout Thread!
Reply #291 on: November 15, 2016, 09:09:09 PM
those are awesome pics
Solving problems you didn't know you had in the most obscure way possible

"And now, it's time to hand this over to our tame race axe driver. Some say, he can live in the forest for six months at a time without food, and he knows of a secret tribe of only women where he is their God. All we know is, he's call the Styx!" - TazzieRob


ca Offline BCNZ

  • *
  • Hero Member
  • *****
    • Posts: 522
Re: Skinth Loadout Thread!
Reply #292 on: November 16, 2016, 05:22:44 PM


ca Offline Lardlad

  • Jr. Member
  • **
    • Posts: 76
Re: Skinth Loadout Thread!
Reply #293 on: November 18, 2016, 04:19:53 PM
BCNZ - what model of Skinth is that?  Great pics as well...


ca Offline BCNZ

  • *
  • Hero Member
  • *****
    • Posts: 522
Re: Skinth Loadout Thread!
Reply #294 on: November 18, 2016, 05:32:35 PM
BCNZ - what model of Skinth is that?  Great pics as well...

Thanks.  It's an OG+.


gr Offline kkokkolis

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 6,350
  • Τετραφάρμακος
Re: Skinth Loadout Thread!
Reply #295 on: December 04, 2016, 11:21:33 AM
I have 3 Skinths, the CatchAll, a Shield and a Toolet. I now carry the Skinth with an EDC focused around the Spirit S.
You can see my Shield besides my CatchAll. It has the same configuration, but currently I carry a Squirt S4 for the scissors, in place of the custom Vic you see.
Now, the "problem" is that I miss my Swisschamp XLT. It fits inside the Shield, with all other components, except the Spirit and the scissored multitool. The Shield becomes fatter though. And I'll miss the pliers then.
So, I "need" a Skinth that will carry all those tools that you see (Minimag Solitaire, Vic Compass/Ruler, Pocketwrench II, I 6mm bit case or Leatherman bit case, Vic Ratchet, plus a container with needles, safety needles, Band Aids, Bluetak etc, that is completely flat. The main tools will be:
1. Swisschamp XLT and
2. Skeletoool (for the pliers).
The Skeletool could be attached on the outside with its clip.
Any suggestions?

uploadfromtaptalk1439114516338.jpg
* uploadfromtaptalk1439114516338.jpg (Filesize: 116.8 KB)


gr Offline kkokkolis

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 6,350
  • Τετραφάρμακος
Re: Skinth Loadout Thread!
Reply #296 on: December 06, 2016, 11:16:52 AM
No suggestions, so I went ahead and fitted my XLT and Skeletool in my Sinth 2XL. I also exchanged the Vic driver syystem for a LM one, that works with the Skele.

You see what I have to remove in the first pic.

I also placed the Solitaire elsewhere.

After taking the pics, I realised that the vic ratchet and extension fit near the XLT on the right and the LM extention fits in the left tube.

Let's see which configuration serves me better with some EDC of the new configuration.
Skinth Alt 1 MTO.jpg
* Skinth Alt 1 MTO.jpg (Filesize: 173.12 KB)
Skinth Alt 2 MTO.jpg
* Skinth Alt 2 MTO.jpg (Filesize: 158.9 KB)
Skinth Alt 3 MTO.jpg
* Skinth Alt 3 MTO.jpg (Filesize: 126.1 KB)
« Last Edit: December 06, 2016, 11:22:55 AM by kkokkolis »


au Offline ReamerPunch

  • Thread Killer 2017
  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,185
  • Born to multitask.
Re: Skinth Loadout Thread!
Reply #297 on: March 11, 2017, 05:57:40 PM
And people don't carry a Surge because it's too heavy?  :think:


us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,015
Re: Skinth Loadout Thread!
Reply #298 on: April 04, 2017, 11:14:17 PM
I ordered this direct a couple of years ago and never used it, but I am looking forward to filling it up. 
I have a question about the black clip at the bottom.  I'm not sure what it's used for.  When I was ordering, I recall adding some add-ons and this must have been one of them.  If I clip it to something, then the case hangs upside down.  Is that right? 
Rest in peace ColoSwiss, you will always be remembered.


us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,074
  • Plumbers Know Their Crap!!
Re: Skinth Loadout Thread!
Reply #299 on: April 04, 2017, 11:27:22 PM
I ordered this direct a couple of years ago and never used it, but I am looking forward to filling it up. 
I have a question about the black clip at the bottom.  I'm not sure what it's used for.  When I was ordering, I recall adding some add-ons and this must have been one of them.  If I clip it to something, then the case hangs upside down.  Is that right? 

Nice sheath..
JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽


 

Donations

Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
March Goal: $300.00
Due Date: Mar 31
Total Receipts: $379.86
PayPal Fees: $19.62
Net Balance: $360.24
Above Goal: $60.24
Site Currency: USD
120% 
March Donations

Community Links


Powered by EzPortal