Wanted Maglite and axe

[Crow]

Looking for mini maglite, 3-4D cell maglite and double bladed axe head.

When you make offer, make offer with postage included.

Postages to Finland.

Looking for affordable stuff. Nothing abused or broken, or end of its life range. Broken bulb no problem in Maglite, but has to work.

Axe head, dezend quality, do not mind rust and sharpening. Might come a thrower, but user atleast...

[Crow]

Bumb. Anobody got anything lying around?

[Hyatt181]

I have some 3 d cell laying around. But shipping to Finland I think is cost prohibitive.


Sent from my iPhone using Tapatalk

[Sparky415]

Hey Crow,

I could probably help you out with an Ax head but I'm sure it would be cheaper to find an old rusty one in Finland 

Ooops sorry just reread the question, you are after a double bit,
I only have single bit axes 

[lowtech]

I have a nice bronce coloured 3D lying around.
I´ll have to check teh exact dimensions to calculate shipping, but i guess we should be able to get it over to you cheapish.
Not sure a biout an AA mini-Mag - I´ll have to look.

[Crow]

Thank you for your responce guys.

Hyatt181, postages would probably be more than new one here.

Sparky415, i can find normal axe heads rather cheaply here, but those double bits are hard/impossible to find.

Lowtech, i would love to hear your offer on either one...

[Sparky415]

Thank you for your responce guys.

Hyatt181, postages would probably be more than new one here.

Sparky415, i can find normal axe heads rather cheaply here, but those double bits are hard/impossible to find.
Lowtech, i would love to hear your offer on either one...

  Same as in the UK, I would love to find some here

Good luck 

[Crow]

Thank you for your responce guys.

Hyatt181, postages would probably be more than new one here.

Sparky415, i can find normal axe heads rather cheaply here, but those double bits are hard/impossible to find.
Lowtech, i would love to hear your offer on either one...

  Same as in the UK, I would love to find some here

Good luck 

I admire your work on those rusted golden axes Sparky. I hope i can find some dezend prized axe heads to work with.

[lowtech]

This is the 3D I have.
Shipping will be around 6,5 € - What about 18,- € including shipment?
I´ll have to look for the spare Mini Mag - Right now i only found the ones in my work bag, on the workbench in the shop and the one in the Gerber service kit (which would be for sale, though)

[Crow]

This is the 3D I have.
Shipping will be around 6,5 € - What about 18,- € including shipment?
I´ll have to look for the spare Mini Mag - Right now i only found the ones in my work bag, on the workbench in the shop and the one in the Gerber service kit (which would be for sale, though)

That sounds about right. PM your paypal, and i'll take it. Would there be anything you want or need in trade? Let us forget that mini for awhile now. I will play this one first... Would like to know about that cervice kit though, i havent seen one before...

[Sparky415]

Thank you for your responce guys.

Hyatt181, postages would probably be more than new one here.

Sparky415, i can find normal axe heads rather cheaply here, but those double bits are hard/impossible to find.
Lowtech, i would love to hear your offer on either one...

  Same as in the UK, I would love to find some here

Good luck 

I admire your work on those rusted golden axes Sparky. I hope i can find some dezend prized axe heads to work with.

Looking forward to see what you find 

[lowtech]

The Service kit is a MP 600 and a Mini Maglite in a sheath similar to the Pockits double sheath - I´ll post a pic.

[lowtech]

I did some nasty pics of the Maintenance Kit.
Must be an older one as the newer ones carry Gerber LED lights and the newer Logo stiching.
The Maglite was upgraded with a 3 LED insert. I can supply the stock Incan bulb and reflector.
The MP 600 shows some rust on the Remgrit from storage, the rest seems nearly unused except for the blade which has been sharpened by a Solingen Knife-Sharpener on a professional belt sander and a leather wheel. It had about a mm broken off of the tip, so it´s a bit shorter now.
The kit has been replaced with a Sports Utility Pack in my car.
I´d put a 45,- € pricetag on the Kit I think.

[lowtech]

Some more of the tools and the Maglite

[Crow]

@lowtech, thank you for posting pics. Prize is not bad at all, but i think i will pass this for time being. I am sure someone will take it by heartbeat.

I will take the 3D Maglite tough. If you please...

[lowtech]

Yes of course. No problem at all.
I´m outta town until late saturday, so I think I won´t be able to ship until Monday.

Pm with details en route.

[lowtech]

Wrapped up and waiting for your GO!

[Crow]

@lowtech. It's a GO!