too much play on my juice's rivet

balvenie · **on:** February 27, 2015, 03:14:37 PM

Hi guys. My juice had much play on the plier's rivet; i solved it with pressing it with lrofessional press which i have in my job.

enki_ck · **Reply #1 on:** February 27, 2015, 08:56:15 PM

Yup, with use they can develop play in the pliers pins. I've had to repin my SC2 in the past too.

balvenie · **Reply #2 on:** February 27, 2015, 09:05:46 PM

I think i Will do For my Pulse Too! The wiggle is much and with the right pressure of the press, i can eliminate it at 100%. I must be careful cause the press is able to load 20 tons

enki_ck · **Reply #3 on:** February 27, 2015, 09:08:44 PM

I'd be careful with the Pulse. It uses screws, not rivets. Have you tried tightening the screws first?

balvenie · **Reply #4 on:** February 27, 2015, 09:24:37 PM

To the juice i tighened the rivet of the jaws, not of the other tool! The big rivet of the plier. I'm gonna to do the same For the pulse

enki_ck · **Reply #5 on:** February 27, 2015, 09:28:08 PM

Ah, I see now. And after taking a better look at the picture I don't understand how I missed it the first time.

balvenie · **Reply #6 on:** February 27, 2015, 09:29:11 PM

It should be more clear now

AimlessWanderer · **Reply #7 on:** February 28, 2015, 01:02:42 AM

We designed and built a 500 tonne press at the first engineering company I worked at, for straightening 16" diameter forged bar. I think that would be much more appropriate for "fixing" a Leatherman Juice

Good work there balvenie