Kosmo's Projects

[Syph007]

I applaud your enthusiasm for experimenting with the riveting!  Great to see what you come up with.   

[kosmo]

A fish scaler pickle getter in an 84mm?  It would probably work with an 84mm saw blade back spring, but the spring will need to be thinner or perhaps the use of a shim washer?

[Syph007]

You can use the spring from the 91mm.  Cut the end off and use it as a shim then shorten the spring.  There was someone else on here a year or more ago that put a fishscaler on an 84mm that way.

[kosmo]

I've got an urge to start another 84mm Alox mod.  Perhaps a Micro-Farmer?  Perhaps a serrated Micro-Farmer?

I've still got a mega blade knife on my mind.
Is there another 84mm large blade to fill out a four layer? 

Normal main blade
Serrated main blade
Youth main blade (butter blade)
?

Small pen blade
Clip point small blade
Electrician's blade
Pruner blade

[kosmo]

♫ Should ♫ they ♫ stay ♫ or ♫ should ♫ I ♫ build ♫ now? ♫

[kosmo]

Continuing on my bone scale project.  I've got them prepared for forming.  I was considering working with the bone scales and the brass liners with a sanding wheel.  Do you think I should work with these two materials (bone and brass) separately?