What I want to put on the Rebar?Small Bit Driver, Large Bit driver, Scissors (parts I have appears to be from a charge)What I don't need in order?1. Main Blade, 2. Medium flat/phillips, 3. Sheepsfoot blade, 4. Awl.Can it be done without major modding?
Quote from: TheDude on May 23, 2015, 05:06:54 PMWhat I want to put on the Rebar?Small Bit Driver, Large Bit driver, Scissors (parts I have appears to be from a charge)What I don't need in order?1. Main Blade, 2. Medium flat/phillips, 3. Sheepsfoot blade, 4. Awl.Can it be done without major modding?Major Modding!
With those parts it's just like playing with Lego, no actual modifying needed.
Where I think Steve was pointing: Homemade engineer pliers.
Okay, I've been drinking so take that into account when considering anything I say.Have you tried annealing the sockets to soften them?Or maybe use a hacksaw / dremel and cut in a flathead slot across the top of the screws.Don't forget to heat the screws to break the loctite and remember what Steve said re which side you undo.If you stuff the screws don't stress, I may have some Rebar or Charge ones we can replace them with.Remember to relax and take your time.See how you go mate.
Quote from: zoidberg on May 26, 2015, 03:25:19 PMWhere I think Steve was pointing: Homemade engineer pliers.Thanks Z, I don't know how I screwed that up.
Quote from: zoidberg on May 26, 2015, 03:46:53 PMOkay, I've been drinking so take that into account when considering anything I say.Have you tried annealing the sockets to soften them?Or maybe use a hacksaw / dremel and cut in a flathead slot across the top of the screws.Don't forget to heat the screws to break the loctite and remember what Steve said re which side you undo.If you stuff the screws don't stress, I may have some Rebar or Charge ones we can replace them with.Remember to relax and take your time.See how you go mate.Good advice. Thanks Z-man!
I have only words.... Now I have pics.Thanks again Z-man
but I have nearly destroyed knobs already and wondering if I should buy suitable replacements? Any thoughts?
Quote from: TheDude on May 26, 2015, 06:33:07 PMI have only words.... Now I have pics.Thanks again Z-manNo problem mate. Glad you got it sorted. How you liking it now?
My hat's off to ya Mr. Zman for that slotted bolt idea That works out pretty nicely
Can I ask, what is the torx screw (swapped from original rebar "screw") and the the clip exactly?And I'd assume with whatever it was swapped with they both work in the other?
Thanks for the links zoos erg *(zoidberg, damn autocorrect)
The torx screw comes with the Kick Removable Pocket Clip, more install info in Rebar Pocket Clip Hack Pics.
Quote from: zoidberg on June 25, 2016, 09:49:30 AMThe torx screw comes with the Kick Removable Pocket Clip, more install info in Rebar Pocket Clip Hack Pics.I was wondering what my next ultimate mod extravaganza would be. How does the clip sit on the rebar's handles? Does it just go on with no fuss?