+-

Author Topic: Show your slip joint's thread!  (Read 28015 times)

Offline Mike, Lord of the Spammers!

  • Chief of the Absolutely No Life Club!
  • Admin Team
  • Absolute Zombie Club
  • *
  • Posts: 39,024
  • Country: gb
  • Why haven't you got a Farmer yet!
Show your slip joint's thread!
« on: August 21, 2008, 08:33:45 pm »
While reading through Ben's thread http://forum.multitool.org/index.php/topic,6282.0.html and looking at all the link's and picture's, I just couldn't get excited by all those folder's :-\, there's nothing wrong with them, for the most part there bloody fine knives, but there lacking in that one intangible thing...soul :(

Generally speaking that's to a charge you can't level at a decent slip joint :)

They may be old hat, and past there prime, but they were good enough for our father's and great grandfathers, and there's still a lot to be said for there utility, look's and shear inoffensiveness, not to mention the fact that a good usable one is a fraction of the cost off a decent modern OH folder :)

So please show us your picture's or links to your favourite Trapper's, Congressman's, Sodbusters, Sowbelly, Whittler's and Muskrats :)
[

Offline jzmtl

  • Charter Member
  • Absolutely No Life Club
  • *
  • Posts: 5,787
  • Country: ca
Re: Show your slip joint's thread!
« Reply #1 on: August 21, 2008, 09:03:34 pm »
I think these qualify as "great grandfathers", because I was told they are from 1930's.  :D They came together with the capsul multi I showed the other day. Duno really know what I'll do with them, they are oiled up and sitting in a sandwich bag together with the multi.

Offline Mike, Lord of the Spammers!

  • Chief of the Absolutely No Life Club!
  • Admin Team
  • Absolute Zombie Club
  • *
  • Posts: 39,024
  • Country: gb
  • Why haven't you got a Farmer yet!
Re: Show your slip joint's thread!
« Reply #2 on: August 21, 2008, 09:04:36 pm »
The top one looks as though it's got a few stories behind it :)
[

Offline GMArthur

  • Full Member
  • ***
  • Posts: 227
  • Country: us
Re: Show your slip joint's thread!
« Reply #3 on: August 22, 2008, 01:12:12 am »
Here is a couple of mine......










Offline I'm Still Bison

  • No Life Club
  • ******
  • Posts: 3,581
  • Supreme Planetary Overlord trainee
Re: Show your slip joint's thread!
« Reply #4 on: August 22, 2008, 03:53:23 am »
I think these qualify as "great grandfathers", because I was told they are from 1930's.  :D They came together with the capsul multi I showed the other day. Duno really know what I'll do with them, they are oiled up and sitting in a sandwich bag together with the multi.

                 I thought that bottom knife was a Richartz.AFAIK they no longer make tradtional folders,but they're still aound making SAK clones.

http://www.richartz.com/htxs/e_index.html
I

Offline jzmtl

  • Charter Member
  • Absolutely No Life Club
  • *
  • Posts: 5,787
  • Country: ca
Re: Show your slip joint's thread!
« Reply #5 on: August 22, 2008, 04:37:41 am »
Hmm the logo does look similar, although mine doesn't have any brand name on it.

Offline Mike, Lord of the Spammers!

  • Chief of the Absolutely No Life Club!
  • Admin Team
  • Absolute Zombie Club
  • *
  • Posts: 39,024
  • Country: gb
  • Why haven't you got a Farmer yet!
Re: Show your slip joint's thread!
« Reply #6 on: August 22, 2008, 06:25:51 am »
Here is a couple of mine......










Nice collection mate :)

It's such a shame Schrade went the way off the Dodo :(, they made some excellent budget slippies :)

That last Damascus one is simply gorgeous mate :drool:
[

Offline Sea Monster

  • No Life Club
  • ******
  • Posts: 2,887
  • Peppermint Fresh
Re: Show your slip joint's thread!
« Reply #7 on: August 22, 2008, 10:22:09 am »
How do I know if my Schrade is from Schrade times or Taylor Cutlery?
[

Offline Mike, Lord of the Spammers!

  • Chief of the Absolutely No Life Club!
  • Admin Team
  • Absolute Zombie Club
  • *
  • Posts: 39,024
  • Country: gb
  • Why haven't you got a Farmer yet!
Re: Show your slip joint's thread!
« Reply #8 on: August 22, 2008, 01:51:52 pm »
How do I know if my Schrade is from Schrade times or Taylor Cutlery?
If it's a good one then it's a proper Schrade :), if it's a piece of crap, then it's a Taylor Craplery one ::)

Have you got any pic's/links too it ???
[

Offline Sea Monster

  • No Life Club
  • ******
  • Posts: 2,887
  • Peppermint Fresh
Re: Show your slip joint's thread!
« Reply #9 on: August 22, 2008, 08:10:27 pm »
Quote
If it's a good one then it's a proper Schrade Smiley, if it's a piece of crap, then it's a Taylor Craplery one

Unfortunately, I'm not a man of discernment & taste, so I wouldn't be able to tell the difference :)
[

Offline Mike, Lord of the Spammers!

  • Chief of the Absolutely No Life Club!
  • Admin Team
  • Absolute Zombie Club
  • *
  • Posts: 39,024
  • Country: gb
  • Why haven't you got a Farmer yet!
Re: Show your slip joint's thread!
« Reply #10 on: August 22, 2008, 08:20:04 pm »
Send it to me and I'll let you know then :D
[

Offline Benner

  • Global Tuffy
  • Admin Team
  • Absolute Zombie Club
  • *
  • Posts: 28,040
  • Country: england
  • Just Awesome! And a Slayer of Polar Bear!
Re: Show your slip joint's thread!
« Reply #11 on: August 22, 2008, 10:22:56 pm »
I am slightly disappointed Def hasn't chimed in yet. 

DEF TAYLOR CUTLERY HAVE BEEN MENTIONED!!!!!!!!!!!!  :pok: :D
I'm back!!

Offline Grant Lamontagne

  • Head Turd Polisher
  • Administrator
  • Absolute Zombie Club
  • *
  • Posts: 29,376
  • Country: ca
  • Optimus Instrumenti Est Inter Vestri
    • Defender Web & Tool
Re: Show your slip joint's thread!
« Reply #12 on: August 22, 2008, 11:12:31 pm »
Quote
If it's a good one then it's a proper Schrade Smiley, if it's a piece of crap, then it's a Taylor Craplery one

Unfortunately, I'm not a man of discernment & taste, so I wouldn't be able to tell the difference :)

Yes you would- they are usually pretty obvious.

The most easily defined feature will be on the blade tang, where it says either China or USA.  If it's China, then it's a Taylor Cutlery piece of crap.  If the joints and seams are large enough to park an economy car in, it's a Taylor Cutlery piece of crap.  If it snaps in half and bursts into flames when you try to use it, it's a Taylor Cutlery piece of crap.  If you spend hours sharpening it and the edge is still too round to open an envelope, it's a Taylor Cutlery piece of crap.  If you bought it more than three years ago, it's a real Schrade, which honestly wasn't the best quality knife out there, but it beats the pants off the Taylor Cutlery hunks of crap.

Basically, if it's a Taylor Cutlery model, it will be obvious.

By the way, I don't know if I've mentioned this yet but Taylor Cutlery really sucks.  The best part about Taylor Cutlery being a bunch of cheap barstids?  They know their stuff is crap, which is why I haven't been sued yet.  However, they also don't care, because they go to bed at night on mattresses stuffed with money, dreaming about what else they can make the 5 year olds in the sweatshops make for them so they can make even more money.  All while waving Old Glory in people's faces and showing photos of brave US troops in war zones, carrying Schrades.  My guess is they are either pre-Taylor Schrades or those soldiers aren't with us today, or are models posing on tanks.  The only good news is, Taylor knives suck so bad, they fail long before they are needed for a life threatening situation.

Def

Offline Benner

  • Global Tuffy
  • Admin Team
  • Absolute Zombie Club
  • *
  • Posts: 28,040
  • Country: england
  • Just Awesome! And a Slayer of Polar Bear!
Re: Show your slip joint's thread!
« Reply #13 on: August 22, 2008, 11:13:44 pm »
Ahh, that's better.  :D
I'm back!!

Offline Sea Monster

  • No Life Club
  • ******
  • Posts: 2,887
  • Peppermint Fresh
Re: Show your slip joint's thread!
« Reply #14 on: August 22, 2008, 11:18:32 pm »
Interestingly, the company is actually called "Taylor Brands"

but everyone has been calling it Taylor Cutlery since I said the wrong thing five posts ago...


(I shouldn't have mentioned it)
[

 

+-Donations

Operational Funds

Keep the Unworkable working!
Donate with PayPal!
February Goal: $250.00
Due Date: Feb 29
Total Receipts: $100.00
PayPal Fees: $6.61
Net Balance: $93.39
Below Goal: $156.61
Site Currency: USD
37% 
February Donations

+-Community Links

EDC Source
Multitool.org
Multitool Gallery
Multitool Wiki
SAKWiki
SOSAK Online
Powered by EzPortal