Scissors into Pocket Power Plier?

[Joe58]

Hey guys -

Did a quick scan in the forum but didn't see what I'm after.

I appreciate how easy it is to move the tools around on the SOG MT's but I'm assuming there's a way to add scissors to the PPP?

If so, which tool do I need to rob the scissors from?

Lack of scissors is one of reasons I pretty much put the SOG into the drawer and moved over to the Vic MT. But I do appreciate the lightness and trim fit of the SOG. Heavy duty enough for the casual tasks that happen along. But I'd like scissors. But I do have my minichamp align usually. But, it's fun to mess around, mix and match. Lol.

[sLaughterMed]

Its definitely doable. I have personally put some 91mm Vic Scissors onto mine:

I used a Dremel tool to widen the stock pivot hole, and although I dont have a pic, the scissors did over rotate out, and did not snap into place.

I want to say ThePeacent put Wave scissors into a Power Plier (PPPs older brother, with the same retention method and pivot size), which should be a drop in mod.

SOG scissors (available for purchase online) may work despite SOG saying otherwise, but they aren't very good, so I would avoid them.

[Poncho65]

Its definitely doable. I have personally put some 91mm Vic Scissors onto mine:
(Image removed from quote.)
I used a Dremel tool to widen the stock pivot hole, and although I dont have a pic, the scissors did over rotate out, and did not snap into place.

I want to say ThePeacent put Wave scissors into a Power Plier (PPPs older brother, with the same retention method and pivot size), which should be a drop in mod.

SOG scissors (available for purchase online) may work despite SOG saying otherwise, but they aren't very good, so I would avoid them.

I agree with sLaughtermed He knows his stuff and this is some good advice Joe

[Kampfer]

Check here: http://forum.multitool.org/index.php/topic,62454.msg1164759.html#msg1164759

[Poncho65]

Check here: http://forum.multitool.org/index.php/topic,62454.msg1164759.html#msg1164759
(Image removed from quote.)

Thanks for the link Kampfer Good thread

[sLaughterMed]

Check here: http://forum.multitool.org/index.php/topic,62454.msg1164759.html#msg1164759
(Image removed from quote.)

I had completely forgotten about that mod. Thanks for the reminder, and I hope you dont mind that I basically copied all your ideas

[Kampfer]

Imitation is the sincerest form of flattery. 

[Joe58]

So for the basic unskilled, not mechanically inclined, person such as me, if I just want drop in, then scissors from a Wave will work it seems.

Appreciate the replies!

[lemo]

So for the basic unskilled, not mechanically inclined, person such as me, if I just want drop in, then scissors from a Wave will work it seems.

Appreciate the replies!

Just tried wave (new shape) scissors here.
http://forum.multitool.org/index.php/topic,67960.0.html

PST II scissors or possibly old style wave scissors (if they are the same) may be a better option.