New! Gerber Center Drive

[AimlessWanderer]

Still above the MSRP though. Give it time for the stockists to get their consignments in, and let them start fighting for orders 

[babola]

Still above the MSRP though. Give it time for the stockists to get their consignments in, and let them start fighting for orders 

Hmm, don't think so.

Remember Gerber flashed different kit options few days ago on their website: tool only, tool + sheath, tool + sheath + bit set. They mention $89 as a starting price for the basic product (tool-only).

Let's see, it will all be revealed tomorrow.

[Mechanickal]

Still above the MSRP though. Give it time for the stockists to get their consignments in, and let them start fighting for orders 

Hmm, don't think so.

Remember Gerber flashed different kit options few days ago on their website: tool only, tool + sheath, tool + sheath + bit set. They mention $89 as a starting price for the basic product (tool-only).

Let's see, it will all be revealed tomorrow.

Worldwide, or amazon countries only?

[babola]

Still above the MSRP though. Give it time for the stockists to get their consignments in, and let them start fighting for orders 

Hmm, don't think so.

Remember Gerber flashed different kit options few days ago on their website: tool only, tool + sheath, tool + sheath + bit set. They mention $89 as a starting price for the basic product (tool-only).

Let's see, it will all be revealed tomorrow.

Worldwide, or amazon countries only?

Gerber web site.

[AimlessWanderer]

Still above the MSRP though. Give it time for the stockists to get their consignments in, and let them start fighting for orders 

Hmm, don't think so.

Remember Gerber flashed different kit options few days ago on their website: tool only, tool + sheath, tool + sheath + bit set. They mention $89 as a starting price for the basic product (tool-only).

Let's see, it will all be revealed tomorrow.

Ahh, good call 

[TazzieRob]

I think it would be a good tool to test out.

Leatherman only need to release a bit extender with a dog legged shank and they would have a truly centre drive tool that takes standard sized 6mm / 1/4" bits, albeit one that has to be deployed in more steps than the Gerber. If the screw driver is one of your most used tools, externally opening is going to be a huge plus. I can see where they get creative with the marketing, they aren't saying they are the first tool with centre (center) drive screw driver, just the first to have a full sized bit driver on the centre(ish) axis.

Benefit of the LM offering is you can open the tool one handle half way for more leverage, or all the way to 180 degrees to fit into tighter space. Also the flat bits mean I can carry the equivalent of 22 extra bits in a package approximately 100mm x 25mm x 6mm (4" x 1" x 1/4") that fits in the sheath with my Surge. 22 standard sized single sided bits would take up so much room I'd never carry them. I don't see them as a replacement for a dedicated driver, but useful in a pinch. In the Surge I'd happily forego the can opener for a beefier bit holder.

Hopefully this is a platform that Gerber will use to release different variants of the tool. I personally, however, am not that interested in a multitool without scissors. The ergonomics of the pliers look to be a winner for Gerber, though I haven't owned any of the MP offerings. Butterfly style of Wave and especially the Surge splay out a fair way and make wrapping your hands around the tool on larger diameter material a lot harder.

[babola]

Amazon stock just sold out in under 7 minutes. This must be a record for a multitool.

[AimlessWanderer]

Amazon stock just sold out in under 7 minutes. This must be a record for a multitool.

I thought Screwdriver by Prince was a record for multitools 

[babola]

Amazon stock just sold out in under 7 minutes. This must be a record for a multitool.

I thought Screwdriver by Prince was a record for multitools 

 

[Grathr]

Did anyone here get one?
I was too late.
If I order one, I wonder how long it will take to get back in stock?

[Grant Lamontagne]

I'm heading to my local Cabelas this morning to see if I can get one. 

Def

[Monrogue]

Sent from my SM-G920R4 using Tapatalk

[Grant Lamontagne]

Big load of zilcho.

They say they may get some in, and the guy seemed really pumped to see what they were, but that was only after I told him they existed.  He'd never heard of them before.

Guess I'm not expecting to get one locally any time soon.  I hope others have had more luck?

Def

[Grathr]

My options are very limited so I went with amazon, gambling they will get them in stock soon. They will most likely get them in stock long before they become awailable here.

[bftx]

They are available on Midway USA with free shipping. Tool and sheath for 89.99, or tool,bit set, sheath for 99.99!  Also, no tax if you don't live in Missouri, so it's not too bad of a deal.

Mine will arrive Thursday, I'll post detailed pictures and impressions when it arrives.

Sent from my Nexus 6 using Tapatalk

[babola]

That Amazon price of $90 for the full set is looking more and more attractive, especially when compared with full set retail of $120 on Gerber's website.

[bftx]

That Amazon price of $90 for the full set is looking more and more attractive, especially when compared with full set retail of $120 on Gerber's website.

I almost bought it on Amazon, but they were sold out.  Found the full set on Midway USA for 99, but you don't pay taxes so it evens out.

I've never been this excited about a multi tool.

Sent from my Nexus 6 using Tapatalk

[metasyntax]

I'm really looking forward to reading you guys' thoughts on it.

[kaput]

Whoever got one using amazon prime should have it in t-minus 2 days!!!!

[Idahoreferman]

I would like to see a review by someone before I try and replace the surge


Sent from my iPhone using Tapatalk

[bftx]

I would like to see a review by someone before I try and replace the surge


Sent from my iPhone using Tapatalk

I'll have a first impression with pictures tomorrow.

Sent from my Nexus 6 using Tapatalk

[Idahoreferman]

I would like to see a review by someone before I try and replace the surge


Sent from my iPhone using Tapatalk

I'll have a first impression with pictures tomorrow.

Sent from my Nexus 6 using Tapatalk

I can not wait


Sent from my iPhone using Tapatalk

[Monrogue]

[kaput]

I can haz popped corns

[Gareth]

[dks]

+1

[Grant Lamontagne]

Mine should be here tomorrow or Monday....  should......

 

Def

[mcb]

My amazon account still states that my Center Drive will be delivered today but the status says Shipping Soon.   

I am anxious to compare the Center Drive Kit to my Surge Kit.  Either way my EDC is still my Skeletool.

ETA:  Dang...  Amazon just informed me that its going to be late.  They are stating Dec 3 as the new ship date...   Wow I might just cancel the order now.

[bftx]

I received the Center Drive today, a bit of good, and a bit of bad.

I didn't receive the bit set, even though I ordered the model that included the bit set.

I can tell this tool is tough, but IMO the sliding plier feature isn't as good as seen on the MP400 and 600. On the Center Drive, the unlock/slide mechanism is on one side of the tool, and doesn't seem quite as smooth.  I may get use to this.

A few negatives, the blade is slightly bent and rubs on the frame when closed, the bit driver when extended has a bit of vertical and horizontal play.

I'm going to exchange this one for another Center Drive and see if I have any better luck.

Quick impressions, great design, but the build quality, and precision isn't quite there on my model.  The knife blade is fantastic, and sturdy!  The bit driver feels fantastic, best driver on any multi tool.  The tools inside the handle have a bit of play when out/locked, but I remember the MP400/600 didn't have super sturdy lockup.  Also, the file is 2 sided, I was sure hoping to see the bottom edge have a filing portion.  The awl is super sharp and will be a good marking tool. 

Just throwing my thoughts out there and first impressions.  Any questions, ask away.

[Grant Lamontagne]

I received the Center Drive today, a bit of good, and a bit of bad.

I didn't receive the bit set, even though I ordered the model that included the bit set.

I can tell this tool is tough, but IMO the sliding plier feature isn't as good as seen on the MP400 and 600. On the Center Drive, the unlock/slide mechanism is on one side of the tool, and doesn't seem quite as smooth.  I may get use to this.

A few negatives, the blade is slightly bent and rubs on the frame when closed, the bit driver when extended has a bit of vertical and horizontal play.

I'm going to exchange this one for another Center Drive and see if I have any better luck.

Quick impressions, great design, but the build quality, and precision isn't quite there on my model.  The knife blade is fantastic, and sturdy!  The bit driver feels fantastic, best driver on any multi tool.  The tools inside the handle have a bit of play when out/locked, but I remember the MP400/600 didn't have super sturdy lockup.  Also, the file is 2 sided, I was sure hoping to see the bottom edge have a filing portion.  The awl is super sharp and will be a good marking tool. 

Just throwing my thoughts out there and first impressions.  Any questions, ask away.

Got any pictures?   

Def