Show us your folders.

Sparky415 · **Reply #1680 on:** March 20, 2015, 07:40:58 PM

Thanks for that Guys

Thanks for the picture Shark that explains everything

looks like it is in worse condition than I thought

captain spaulding · **Reply #1681 on:** March 20, 2015, 10:44:39 PM

After years of not having a pocket clip for this knife I finally ordered one. I wanted the older squared style, but was told they did not carry those anymore. To my surprise when it arrived it was the squared version. I also ordered the stainless version which is for the rescue knives, but I like how it looks on the Delica.

sawman · **Reply #1682 on:** March 21, 2015, 12:28:29 AM

Quote from: captain spaulding on March 20, 2015, 10:44:39 PM

After years of not having a pocket clip for this knife I finally ordered one. I wanted the older squared style, but was told they did not carry those anymore. To my surprise when it arrived it was the squared version. I also ordered the stainless version which is for the rescue knives, but I like how it looks on the Delica.

Cap'n, if you don't mind me saying, you have the best collection of knives I've seen on this forum

captain spaulding · **Reply #1683 on:** March 21, 2015, 12:29:27 AM

Thanks buddy. That means a lot.

cool123 · **Reply #1684 on:** March 23, 2015, 06:16:25 AM

I have the Tac Force tactical folding knife.

hiraethus · **Reply #1685 on:** April 14, 2015, 10:14:51 PM

Eden 106 arrived today.

Familiar shape.

Lock and clip

Made by Sanrenmu - actually a 710/7010

I was slightly surprised by how small it is - about the same length as a Pioneer, but with a deeper blade.

Seems very nicely finished - the blade is well centred and very sharp with an OK grind (not identical both sides but not far off), opens smoothly and is getting better with use, though I need to practice opening with just my thumb. Locks up tight but easy to release.

captain spaulding · **Reply #1686 on:** April 14, 2015, 10:25:32 PM

Quote from: hiraethus on April 14, 2015, 10:14:51 PM

Eden 106 arrived today.

Familiar shape.

Lock and clip

Made by Sanrenmu - actually a 710/7010

I was slightly surprised by how small it is - about the same length as a Pioneer, but with a deeper blade.

Seems very nicely finished - the blade is well centred and very sharp with an OK grind (not identical both sides but not far off), opens smoothly and is getting better with use, though I need to practice opening with just my thumb. Locks up tight but easy to release.

The handle shape look very similar to a Sebenza.

hiraethus · **Reply #1687 on:** April 15, 2015, 09:31:39 AM

Yep. If I was feeling charitable, I'd say it was an homage to the Sebenza.

Zed · **Reply #1688 on:** April 15, 2015, 06:06:27 PM

Quote from: hiraethus on April 15, 2015, 09:31:39 AM

Yep. If I was feeling charitable, I'd say it was an homage to the Sebenza.

this started a riot last time

i personally think this are amazingly well mde for the money,miss mine but sadly due to the lockvi never carried mine,just flickedcit a lot in doors

bmot · **Reply #1689 on:** April 16, 2015, 01:02:21 AM

Quote from: Zed on April 15, 2015, 06:06:27 PM

Quote from: hiraethus on April 15, 2015, 09:31:39 AM
Yep. If I was feeling charitable, I'd say it was an homage to the Sebenza.

this started a riot last time i personally think this are amazingly well mde for the money,miss mine but sadly due to the lockvi never carried mine,just flickedcit a lot in doors

I have two (a black one and a SS one, from SRM themselves, not the Eden ones) and I agree, very high value knives

love to flick them although I do find it's rather bad for my nails

kirk13 · **Reply #1690 on:** April 18, 2015, 01:37:00 AM

Quote from: Zed on April 15, 2015, 06:06:27 PM

Quote from: hiraethus on April 15, 2015, 09:31:39 AM
Yep. If I was feeling charitable, I'd say it was an homage to the Sebenza.

this started a riot last time i personally think this are amazingly well mde for the money,miss mine but sadly due to the lockvi never carried mine,just flickedcit a lot in doors

It still has a valued place in my permanent collection Paul

hiraethus · **Reply #1691 on:** April 20, 2015, 01:45:01 PM

I think I'd been ~~playing with it~~ perfecting my technique a bit much over the weekend - it opened very smoothly but the blade loosened up and was no longer held securely. Turns out the pivot screw had come loose and needed tightening. Added a drop of Loctite to prevent it coming loose again and retightened. Now it's not quite as quick to open but feels more secure.

dks · **Reply #1692 on:** May 10, 2015, 05:32:48 PM

Two Austrian friction folders and 1 Portuguese linerlock knife (shown with an opinel)

hiraethus · **Reply #1693 on:** June 04, 2015, 10:19:34 AM

Got a Svord Mini Peasant in radioactive green yesterday. The handle was a bit rough and ready and the blade had an uneven edge but a quick scrape with a file and 20 minutes with a Lansky sorted that out, mostly. It's a bit long when folded but I'll stick it in my pocket for a few days and see if I get on with it.

ducttapetech · **Reply #1694 on:** June 04, 2015, 01:11:36 PM

Nice!

Nate
That's us mobile

captain spaulding · **Reply #1695 on:** June 04, 2015, 07:08:20 PM

Quote from: hiraethus on June 04, 2015, 10:19:34 AM

Got a Svord Mini Peasant in radioactive green yesterday. The handle was a bit rough and ready and the blade had an uneven edge but a quick scrape with a file and 20 minutes with a Lansky sorted that out, mostly. It's a bit long when folded but I'll stick it in my pocket for a few days and see if I get on with it.

I love the Mini Peasant so much! I would not particularly like to pocket carry one unless you could get it to carry vertical, but it has its time and place for sure.

derekmac · **Reply #1696 on:** June 12, 2015, 12:20:56 AM

sak60 · **Reply #1697 on:** June 22, 2015, 09:45:14 AM

This is a liner lock that was supplied to workers in Telecom (now Telstra) here in Australia. Made for Shelham (Sheldon and Hammond) an import company.

Sparky415 · **Reply #1698 on:** June 22, 2015, 07:27:03 PM

Looks like a nice working knife

shark_za · **Reply #1699 on:** June 23, 2015, 08:39:26 AM

Serious case of "A diamond in the rough"

Quote from: derekmac on June 12, 2015, 12:20:56 AM

captain spaulding · **Reply #1700 on:** June 23, 2015, 09:00:45 AM

Quote from: shark_za on June 23, 2015, 08:39:26 AM

Serious case of "A diamond in the rough"
Quote from: derekmac on June 12, 2015, 12:20:56 AM

So true.

derekmac · **Reply #1701 on:** June 23, 2015, 12:53:21 PM

I know they're not all as nice as the BG knives, but cut them some slack! Once day Spyderco will be up to their quality.

Etherealicer · **Reply #1702 on:** June 23, 2015, 01:00:42 PM

Quote from: derekmac on June 23, 2015, 12:53:21 PM

I know they're not all as nice as the BG knives, but cut them some slack! Once day Spyderco will be up to their quality.

Whats the deal with that Spyderco blade? I mean they did that on purpose, right? But what is the purpose?

sak60 · **Reply #1703 on:** June 23, 2015, 01:01:34 PM

Thanks Sparky it sharpens up well and is a very solid tool.

derekmac · **Reply #1704 on:** June 23, 2015, 01:02:03 PM

Quote from: Etherealicer on June 23, 2015, 01:00:42 PM

Quote from: derekmac on June 23, 2015, 12:53:21 PM
I know they're not all as nice as the BG knives, but cut them some slack! Once day Spyderco will be up to their quality.

Whats the deal with that Spyderco blade? I mean they did that on purpose, right? But what is the purpose?

From what I've read, it was to cut down on weight. I don't think it would really save all that much though.

It actually does held when cutting heavy cardboard though. It allows the blade to slide through easier.