1
The Break Room / Re: Rate the last movie you watched v2
« Last post by IMR4198 on Today at 10:19:13 PM »The Reincarnation of Peter Proud 1975. Great cast. Very watchable movie. Best wishes. G
1
The Break Room / Re: Rate the last movie you watched v2« Last post by IMR4198 on Today at 10:19:13 PM »The Reincarnation of Peter Proud 1975. Great cast. Very watchable movie. Best wishes. G
2
The Break Room / Re: Rate the last movie you watched v2« Last post by IMR4198 on Today at 10:14:52 PM » It must have been Pacu who watched the G-zilla thrilla and wrote something. Good to see the Mrs. out and walking around outside. Best wishes to you both. G
3
Swiss Army Knights Forum / Re: Do you carry a supplemental Sak along with another knife?« Last post by gustophersmob on Today at 10:12:19 PM »For almost 12 years, my EDC has been an alox classic on the keys and a pioneer in the pocket. Every so often, if I think I'll be doing a task where the OHO would be helpful, I'll clip a benchmade mini-grip to the pocket. Its been probably a year since I've even touched it, though.
Now, doing chores around the property, I'll often have a mora on the belt and maybe a hatchet, axe or bill hook (plus all manner of power tools) as the situation demands. 4
Swiss Army Knights Forum / Re: The Sportsman Challenge - April 2024« Last post by AndyAaron on Today at 10:08:43 PM »Day 17
Opened one envelope with the permit/sticker to drive into the city centre of German cities. Then, later today I opened another package with Stockman from NAHC (North American Hunting Club). I understand that this was some kind of limited edition for the club. It is a big knife. I guess the size would be similar to 110. 5
Reviews / Re: Pichi Kootenay« Last post by David Bowen on Today at 10:00:10 PM »They tested it for over 50lbs but don't recommend it for anything like climbing
Sent from my SM-G996U using Tapatalk 6
Reviews / Exceed Designs TiRantV3« Last post by David Bowen on Today at 09:53:11 PM »I've carried a pocket knife on my person for over 20 years. My knife gets used for everything from opening mail, food prep, and the random thing that needs doing. I've used my knife even at work where I open boxes and break them down. I sometimes use my dedicated box cutter which is a Pacific Handy Cutter S4 model. It does things I can't do with my knife because it's specifically designed for a task. Lately I've come across many companies that produce everyday carry box cutters, and thought I would touch on a few. Why do we have EDC box cutters? Because there seems to be people who want a quick access disposable blade that can be used to do dirty work. Work that they wouldn't use their pocket knife for, then again there's the no sharpening aspect as well. Needless to say there's a market for these items and companies are delivering. Today we're checking out the Exceed Designs TiRantV3, a very high end take on a design that's used by everyone.
The TiRantV3 is Exceed Designs 3rd release of the model with a whole host of changes made. I'm not going to go over what's changed since I've never used the previous versions. The TiRantV3 at first glance is familiar yet strikingly different. It doesn't even look like a box or utility cutter but rather a pocket knife. Exceed went to lengths to have this blend in with your everyday items that it becomes homogeneous. What sets it apart from the competition is the materials, and attention to detail. The TiRantV3 features a titanium handle that comes in a variety of options, ceramic bearing pivot, and a framelock with lockbar insert. The whole package is customizable, having extras that you can purchase like a rear pry bar spacer, carbon fiber scale, shorter 38mm clip, and even black hardware. Insane amount of stuff going on here, but everyone likes things they can customize and tweak. The TiRantV3 comes in with an overall length of 6.12", a handle of 3.42, and 2.4oz. I didn't specify blade length since it's removable and there's a varying degrees of stuff that will fit this guy. But usually there's 1.45" of blade available for use. The titanium handles are 6AI-4V Grade 5 Titanium that's stonewashed & skeletonized scales. My scales in particular are the Dual Slash ones, they are milled and give me a lot of grip. The boxed shape is not uncomfortable and moulds to your hand well during use. I love the little accents like square pivot adding to the overall design shape. On the reverse of the handle we have the lockbar and deep carry pocket clip. A lockbar on a box cutter is something I'm not used to seeing. Lockup is rock solid and release has just the right amount of tension. The steel insert will help prevent wear on the titanium and ensure there's plenty of life in this lockup. I do wish this insert had an over travel like pocket knives. An over travel stop will prevent the lock from being over extended by accident. Odd not something that's entirely necessary but I figured it was common place on everything these days. The clip is dead center of the body and has the perfect amount of arc and scoop to make it easy on your pocket. I really appreciate a well designed clip as you guys know and this does not disappoint. The business end of the TiRantV3 features a blade exchanger that allows you to choke up on the blade if necessary. The exchanger uses a locking spring similar to that of a framelock. The locking spring is part of the exchanger itself, this reduces the amount of parts in the exchanger while providing strength to the overall mechanism. The lock is strong enough that I do have some difficulty disengaging it. Strength is a good thing, I definitely don't want that blade coming loose during any kind of work. Deploying the blade is done via a flipper tab, a light switch motion will pop the blade out. The action is smooth thanks to the ceramic bearings in the pivot. The detent on the action is a little strong, requiring a bit of a push before being released and locking into position. Overall I find the TiRantV3 quite a nifty little box cutter. It performs admirable, and offers features and options not seen on run of the mill models . These premium features do come with a higher price tag than say something at your local box store, but the tradeoff is a cutter that will last you a lifetime. Plus the quality of manufacturing makes for a better quality product. If your looking for a new box cutter, or maybe something to save your knife from those dirty jobs check out Exceed Designs TiRantV3. Sent from my SM-G996U using Tapatalk 7
Swiss Army Knights Forum / Re: The Sportsman Challenge - April 2024« Last post by Fireman on Today at 09:53:02 PM »day 15!!!! Just dropping in to say that I love that Canadian Sportsman! 8
General Tool Discussion / Re: Flame On! - April Firestarting Challenge« Last post by TexasAKM on Today at 09:43:40 PM »day 17: That is great! I have a shoe polish tin or two I need to do that with! 9
General Tool Discussion / Re: Flame On! - April Firestarting Challenge« Last post by TexasAKM on Today at 09:41:39 PM » Comis, thank you for the information on IMCO lighters, it is very helpful. I have posted pics of two Imco lighters, I have a third one that has the "come of" on it, yeah that is a big giveaway. I bought it anyway, it was a good price.
10
General Tool Discussion / Re: Flame On! - April Firestarting Challenge« Last post by Fireman on Today at 09:41:24 PM »DAY 17 Huntsman with fire starter on a hike. No fire starting on a hike because wildfires are a risk right now.
|
|