Multitool.org Forum
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
+-

Hello Lurker! Remove this ad and much more by logging in.


Pulse comparison. 6928

Admin Team Point Of No Return Posts: 32,181
Pulse comparison.
« on: June 23, 2009, 03:27:04 PM »
Having just got my hands on a mint Pulse (thanks again Scrappy) I thought I'd do a few comparison shots.

The nearest tools in the current Leatherman line-up are the Blast and the Fuse.  The Pulse sits somewhere in the middle when looking at the tool selection, having a file and a small screwdriver more than the Fuse but lacking the saw of the Blast.



The tool selection on the Pulse is excellent, a very nice range in what is still a very compact body.  In fact, even though the Fuse has less tools the Pulse is that little bit more compact.  I suspect this is due to the plastic inserts the newer tools use.



The Pulse is very comfy to use when compared to the older PST and PST II due to having the nicely rolled edges on the handles that the older tools lacked.



I'd even give it the edge over the Fuse and the Blast as the handles sit a bit closer together when in use.



  The other big thing the Pulse has going for it is the diamond file what a great bit of kit and it's sad the Leatherman don't use it more often.
  So is the Pulse perfect?  Well, not quite.  The roller locks are unconventional to say the least and well earn the title "thumb shredders" that I have heard used before.  Saying that I suspect I'll get used to them and there is no denying that they lock-up nice and solidly.  It also suffers from the tool clumping that was a constant "feature" of the older Leatherman's.

All in all though a great multitool and it's a great shame that Leatherman don't produce an exact equivalent anymore.

Gareth.
« Last Edit: June 23, 2009, 03:29:49 PM by Gareth »

Try not to be the person who blunders around and causes everyone else to get out the way.  Everyone else thinks you're a utter...
Absolutely No Life Club Posts: 8,694 The MTO handshake.
Re: Pulse comparison.
« Reply #1 on: June 23, 2009, 03:47:29 PM »
Gareth nice one mate  :tu: :tu:
The Pulse is one of my favorite LM's & used to be my EDC before I got my Spirit X ::) :D.It is a great size & I am right with you on the diamond file love  :D :D.
I like the scissors too , some ware between the early wave's whoppers & a bit more substantial than the Fuse/Blast. 8)


"Downunder Mod (that sounds dirty, doesn't it?)"
Yeh Baby :P >:D >:D
Admin Team Point Of No Return Posts: 32,181
Re: Pulse comparison.
« Reply #2 on: June 23, 2009, 03:54:57 PM »
Thanks man, I know what you mean about the scissors they are just that little bit more than the Blast etc.  I'm not sure it'll make any difference in use though. :think:

Try not to be the person who blunders around and causes everyone else to get out the way.  Everyone else thinks you're a utter...
Multitool.org Main Site Manager Zombie Apprentice Posts: 15,287
Re: Pulse comparison.
« Reply #3 on: June 23, 2009, 05:07:46 PM »
Thanks for the write up Gareth  :tu:    I wonder why we see so little of diamond files.  My first thought was cost of manufacture but I suppose they also wear out quicker and so might lead to more warranty claims.

I'm not taking any more mod orders at present, sorry.
No Life Club Posts: 4,594 no nacimos con miedo...
Re: Pulse comparison.
« Reply #4 on: June 23, 2009, 06:08:51 PM »
Thanks for the pics :tu: the pulse still at the very buttom of my to-get list but i hope one day i can get one to try it myself :)

A
No Life Club Posts: 2,164
Re: Pulse comparison.
« Reply #5 on: June 23, 2009, 06:48:31 PM »
Nice write up, thanks for the pics.

I really like my pulse, you've covered why above - great tool selection in a compact package.  Those blade locks can be a little painful but they're one of the most secure locks I've seen on an MT.  And I do like those scissors.

Congrats on the new tool mate :tu: Cheers for the write up.

Chief of the Absolutely No Life Club! Abandon All Hope Ye Who Enter Here... Posts: 42,959 Why haven't you got a Farmer yet!
Re: Pulse comparison.
« Reply #6 on: June 23, 2009, 07:11:32 PM »
Thanks for the right up and pictures mate :tu:

Those rolled handles make a hell of a difference don't they :)

Give in, buy several Farmer's!!!!!!
No Life Club Posts: 2,647
Re: Pulse comparison.
« Reply #7 on: June 23, 2009, 08:22:34 PM »
Damn, another one on the wanted list ::) :)

Thanks for the write up :tu:

Prone to daydreaming.
Global Moderator Just Bananas Posts: 61,323
Re: Pulse comparison.
« Reply #8 on: June 23, 2009, 09:43:08 PM »
I really like the Pulse as well :D For me the locks seem to have gotten easier with use or I have just adjusted to them better 1 :think: ;) It is as good a tool as any I own and I just can't figure out why they haven't updated that tool :-\ They need to revamp it's locking system like they did the new SuperTool 300 :o :D It would be the Pulse 2 :cheers:  Those are great pics as well you really did the Pulse justice Gareth :tu:
Admin Team Point Of No Return Posts: 32,181
Re: Pulse comparison.
« Reply #9 on: June 23, 2009, 10:52:10 PM »
Thanks for all the feedback folks.  :salute:

Try not to be the person who blunders around and causes everyone else to get out the way.  Everyone else thinks you're a utter...
Zombie Apprentice Posts: 19,262 Armed with camera and not afraid to use it.
Re: Pulse comparison.
« Reply #10 on: June 23, 2009, 10:55:42 PM »
The Pulse is a grand tool. I like mine.

A little Leatherman information.

Leatherman series articles
Global Tuffy Absolute Zombie Club Posts: 28,078 Just Awesome! And a Slayer of Polar Bear!
Re: Pulse comparison.
« Reply #11 on: June 23, 2009, 11:08:42 PM »
Nice one Gareth.  :tu:  I never got on with the locks on mine so it got sent away to a more appreciative owner.

I'm back!!
Absolutely No Life Club Posts: 5,364
Re: Pulse comparison.
« Reply #12 on: June 23, 2009, 11:53:28 PM »
I gave my dad my Pulse. I think he filed it away in the gun safe. He still carries the Gerber 400 i gave him years ago. Poor Pulse. Hidden in the dark :-\

I need to get another....this time without Windows Server on it ::)

:like:    :MTO:
Global Moderator Just Bananas Posts: 61,323
Re: Pulse comparison.
« Reply #13 on: June 24, 2009, 03:58:51 AM »
I gave my dad my Pulse. I think he filed it away in the gun safe. He still carries the Gerber 400 i gave him years ago. Poor Pulse. Hidden in the dark :-\

I need to get another....this time without Windows Server on it ::)

I took a Rust Eraser to mine and only in a certain light can you see it now (the Window Server 2003 writing) :tu: it is also a more satin finish vs. the shiny finish though :)
Admin Team Absolute Zombie Club Posts: 23,213
Re: Pulse comparison.
« Reply #14 on: June 24, 2009, 04:54:52 AM »
I really like the Pulse as well :D For me the locks seem to have gotten easier with use or I have just adjusted to them better 1 :think: ;) It is as good a tool as any I own and I just can't figure out why they haven't updated that tool :-\ They need to revamp it's locking system like they did the new SuperTool 300 :o :D It would be the Pulse 2 :cheers:  Those are great pics as well you really did the Pulse justice Gareth :tu:

I was thinking the same thing Ponch. Good one! :tu:



Nice pics Gareth! :salute:  (but you forgot to take one of the hidden lanyard ring) :pok: :D

In order to be certain of having the right tool for every job.........one must first acquire a lot of tools
Admin Team Point Of No Return Posts: 32,181
Re: Pulse comparison.
« Reply #15 on: June 24, 2009, 10:06:09 AM »
Just for you Bob. ;)  For those who don't know there is a hidden lanyard ring that sits under the rolled edge of the handle, importantly this means it doesn't take up any room that could be used for another tool.  To get to it you simply need to, nearly, fully open the file and then close it again, the ring should then swivel into place.


Try not to be the person who blunders around and causes everyone else to get out the way.  Everyone else thinks you're a utter...
Global Moderator Just Bananas Posts: 61,323
Re: Pulse comparison.
« Reply #16 on: June 25, 2009, 02:31:19 AM »
That is another feature that they should have kept just like that :-\ The new ones have the ring but it's not so hidden and sometimes well most of the time comes out with other implements :-[ but if you are a lanyard person then I am sure that never would bother you :D
Turd Bucket No Life Club Posts: 2,633
Re: Pulse comparison.
« Reply #17 on: June 27, 2009, 10:47:53 PM »
nice review. it is one of my favorite tools. I still have one with the windows logo.
Admin Team Point Of No Return Posts: 32,181
Re: Pulse comparison.
« Reply #18 on: June 27, 2009, 10:58:44 PM »
Thanks Scrappy, it really is a great tool.  :)  I'm also quickly getting used to the locks, not such a pain to use now.

Try not to be the person who blunders around and causes everyone else to get out the way.  Everyone else thinks you're a utter...
Admin Team Absolute Zombie Club Posts: 23,213
Re: Pulse comparison.
« Reply #19 on: June 27, 2009, 11:44:14 PM »
Just for you Bob. ;)  For those who don't know there is a hidden lanyard ring that sits under the rolled edge of the handle, importantly this means it doesn't take up any room that could be used for another tool.  To get to it you simply need to, nearly, fully open the file and then close it again, the ring should then swivel into place.

(Image removed from quote.)

Thank you sir, for another fine picture! :salute: 

Yah, the more I think about it the more I like the idea of a Pulse II with rocker locks. (like a Blast or a Core) Wouldn't that be just the cat's meow? :multi:


In order to be certain of having the right tool for every job.........one must first acquire a lot of tools
Admin Team Point Of No Return Posts: 32,181
Re: Pulse comparison.
« Reply #20 on: June 28, 2009, 10:34:49 AM »
The dogs danglies mate.   :cheers:

For me the plastic inserts don't have any real advantage over the rolled edge, and add a bit of bulk that isn't necessary.  I don't dislike them particularly but I'd rather see a slimmer tool.

Hear that Mr Leatherman?  Pulse II, with Blast type locks, rolled edges and a diamond file.  :drool:

Try not to be the person who blunders around and causes everyone else to get out the way.  Everyone else thinks you're a utter...
Global Tuffy Absolute Zombie Club Posts: 28,078 Just Awesome! And a Slayer of Polar Bear!
Re: Pulse comparison.
« Reply #21 on: June 28, 2009, 12:50:20 PM »
The dogs danglies mate.   :cheers:

For me the plastic inserts don't have any real advantage over the rolled edge, and add a bit of bulk that isn't necessary.  I don't dislike them particularly but I'd rather see a slimmer tool.

Hear that Mr Leatherman?  Pulse II, with Blast type locks, rolled edges and a diamond file.  :drool:

Make that knifeless and I'd be a happy guy.  :tu:

I'm back!!
No Life Club Posts: 1,681

cgk

******
Re: Pulse comparison.
« Reply #22 on: June 28, 2009, 11:13:11 PM »
I was considering a Kick for a light EDC but the Pulse seems to fit the bill better.  Does anyone know if a pocket clip can be added to the pulse?
Global Tuffy Absolute Zombie Club Posts: 28,078 Just Awesome! And a Slayer of Polar Bear!
Re: Pulse comparison.
« Reply #23 on: June 29, 2009, 12:16:51 AM »
I was considering a Kick for a light EDC but the Pulse seems to fit the bill better.  Does anyone know if a pocket clip can be added to the pulse?

You could always try doing something like this http://forum.multitool.org/index.php/topic,7116.0.html

I'm back!!
Turd Bucket No Life Club Posts: 2,633
Re: Pulse comparison.
« Reply #24 on: June 29, 2009, 03:25:41 AM »
thank you.
I put the sak to good use. saw, metal saw, and scissors make it perfect.
Absolutely No Life Club Posts: 8,694 The MTO handshake.
Re: Pulse comparison.
« Reply #25 on: June 29, 2009, 03:52:06 AM »
I was considering a Kick for a light EDC but the Pulse seems to fit the bill better.  Does anyone know if a pocket clip can be added to the pulse?

I used a clip from a LM knife to my Pulse
http://forum.multitool.org/index.php/topic,7216.0.html


"Downunder Mod (that sounds dirty, doesn't it?)"
Yeh Baby :P >:D >:D
No Life Club Posts: 1,681

cgk

******
Re: Pulse comparison.
« Reply #26 on: June 29, 2009, 06:31:30 AM »
I was considering a Kick for a light EDC but the Pulse seems to fit the bill better.  Does anyone know if a pocket clip can be added to the pulse?

I used a clip from a LM knife to my Pulse
http://forum.multitool.org/index.php/topic,7216.0.html
Well that answers that.  I guess I need to find a Pulse to purchase.  Anyone?? :pok:
Admin Team Point Of No Return Posts: 32,181
Re: Pulse comparison.
« Reply #27 on: July 01, 2012, 01:54:01 PM »
Just a little thread necromancy here. :D  I was looking back through some of my older topics and I came across this one.  The Pulse remains one of my favourite all time multitools and still gets carried frequently.  Since this thread was last posted in we have seen LM making a return to the rolled edges on both the Supertool and now the Rebar, sadly I still don't think the Rebar quite makes for an updated Pulse IMO due to the fact it lacks a pair of scissors. :-\  It's close Mr Leatherman, but still not quite there. ;)

Try not to be the person who blunders around and causes everyone else to get out the way.  Everyone else thinks you're a utter...
No Life Club Posts: 1,568 4x4 since '74
Re: Pulse comparison.
« Reply #28 on: July 02, 2012, 02:42:06 AM »
...  sadly I still don't think the Rebar quite makes for an updated Pulse IMO due to the fact it lacks a pair of scissors.....

I brought my Leatherman Pulse into a store today to compare it with the new Rebar they sell.   I was disappointed to see that the Rebar knife is much thinner than the Pulse knife.

The spine on the Pulse knife is as thick as the knife on the Super Tool 300.

Retired engineer, author.

A man with one multitool always knows exactly which to use. A man with many multitools is never quite sure. - parnass
Admin Team Point Of No Return Posts: 32,181
Re: Pulse comparison.
« Reply #29 on: July 02, 2012, 08:00:59 AM »
Well I've not managed to do that direct comparison, but I can certainly attest to the thickness of the Pulse blade, it's very stout. :salute:

Try not to be the person who blunders around and causes everyone else to get out the way.  Everyone else thinks you're a utter...

 

Donations

Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
October Goal: $300.00
Due Date: Oct 31
Total Receipts: $280.46
PayPal Fees: $16.24
Net Balance: $264.22
Below Goal: $35.78
Site Currency: USD
88% 
October Donations

Community Links


Powered by EzPortal
SMF 2.0.17 | SMF © 2020, Simple Machines
Page created in 0.051 seconds with 32 queries.
© 2018 Defender Web & Tool