What Did You Use Your Multitool For Today?

edcgear · **Reply #1980 on:** April 13, 2011, 02:36:57 PM

SwissTool

Few days ago I've stripped some wires, reassembled lamp, connected them lamp socket, assembled lamp and screw it uned kitchen cabinet...

Woila wife!!

And now she complaints, and want another lamp like that on the other side of cabinet...

Last night SwissTool did some job again...

Door handle got loosen and stayed in my hand while closing the door, small screw which holds it togeter got loosen, so I tight him up and while dooing that I've noticed few more loosen screws, so ST fixed that too...

Did I mentioned that ST is my favorite allrounder?!? Just like how hefty it feels in hand, and how capable it is! Awesom tool IMHO!

New_World · **Reply #1981 on:** April 14, 2011, 10:05:49 AM

Quote from: edcgear on April 13, 2011, 02:36:57 PM

SwissTool

Few days ago I've stripped some wires, reassembled lamp, connected them lamp socket, assembled lamp and screw it uned kitchen cabinet...

Woila wife!!

And now she complaints, and want another lamp like that on the other side of cabinet...

Last night SwissTool did some job again...

Door handle got loosen and stayed in my hand while closing the door, small screw which holds it togeter got loosen, so I tight him up and while dooing that I've noticed few more loosen screws, so ST fixed that too...

Did I mentioned that ST is my favorite allrounder?!? Just like how hefty it feels in hand, and how capable it is! Awesom tool IMHO!

my lamp went out and i pulled out the soldering iron and fixed it.......... BUT now the goose neck won't stay tight.
I'll try some super glue.

maybe I should just get a new lamp. LOL

(btw used the s2)

MultiMat · **Reply #1982 on:** April 17, 2011, 05:52:48 AM

Yesterday when hooking up my trailer noticed one of the contact pins had come loose

.
I had the MUT in the car but the small electric screw would be too small for the MUT

.
Nup took the smaller of the 3 MUT bits out & used it out of the tool , worked a charm

.
Used the MUT's hammer to whack in our chicken run's supporting stakes

. Hammer on a MT

GraysonK · **Reply #1983 on:** April 18, 2011, 09:12:55 PM

Used the Explorer Plus to sharpen my pencil today in between classes. I know I've done that before, but I really like doing it. It's relaxing for a few moments anyway.

thamesides · **Reply #1984 on:** April 22, 2011, 10:01:44 PM

Used my old faithful battered 30 year old SAK to try & fix the vacum cleaaner.The philips head for most of the screws until I couldn't reach the deeper screws.Then the flat part pfthe bottle opener to leaver the casing apart.All to no avail after years of loyal service the vacum cleaner had expired.Steve

AHB · **Reply #1985 on:** April 22, 2011, 10:53:11 PM

My old Huntsman became very handy opening beer/wine bottles today at a very nice easter dinner with
guests and family..

Mercury · **Reply #1986 on:** April 23, 2011, 06:48:25 AM

I used my new swisschamp to open the package containing my new spirit!

David · **Reply #1987 on:** April 23, 2011, 07:15:31 AM

Used a SOG PowerLock to tighten up some phillips head screws at work.

AHB · **Reply #1988 on:** April 23, 2011, 07:56:51 AM

Quote from: Mercury on April 23, 2011, 06:48:25 AM

I used my new swisschamp to open the package containing my new spirit!

Hard to top that feeling...

Cyclone82 · **Reply #1989 on:** April 23, 2011, 10:11:10 AM

I used the phillips head screwdriver (well really its just a pointy thing

) on my LM squirt PS4 to pop off and re-fit the letter 'C' key button on my computer keyboard which came loose.

Mercury · **Reply #1990 on:** April 23, 2011, 06:55:48 PM

Quote from: AHB on April 23, 2011, 07:56:51 AM

Quote from: Mercury on April 23, 2011, 06:48:25 AM
I used my new swisschamp to open the package containing my new spirit!
Hard to top that feeling...

It sure is!

6thtexas · **Reply #1991 on:** April 24, 2011, 06:22:20 AM

I fixed a deer feeder with my PSTII

edap617 · **Reply #1992 on:** April 24, 2011, 08:08:16 AM

I use the beer bottle opener of my Micra to open 6 bottles of beer.

Mercury · **Reply #1993 on:** April 24, 2011, 09:59:43 AM

I used the awl on my spirit today to ream a hole in a tire so I could patch it. Worked perfectly! The serrated blade made simple work of cutting the plugs to length as well.

thebullfrog · **Reply #1994 on:** April 28, 2011, 02:01:17 AM

Dat before yesterday I used my SwissChamp to begin building a new cabinet/book shelf. My GF then used my Cybertool to finish the job after I left for a job interview (God I love her), then yesterday I used the Cybertool to build my new computer. No use today as I was at my new job. It's been a damn good couple days

MeadMaker · **Reply #1995 on:** April 28, 2011, 02:56:30 AM

I made the mistake of wearing a new set of shoes to work a booth at an industry show, so I used the scissors on my Juice to cut some mole skin to size.

edcgear · **Reply #1996 on:** May 01, 2011, 06:29:32 PM

Tenacious and SwissGrip had some serious job today... Went BBQ, so Tenacious was in charge of meat, bread, onion... And for SG there was crucial job for bottle opener!!!

Ashley · **Reply #1997 on:** May 02, 2011, 04:50:55 AM

I used my camo leatherman charge to put in screws to hold up the new curtains and rods.

Mercury · **Reply #1998 on:** May 02, 2011, 06:52:36 AM

I put my spirit to use doing a very common task, pulling fuses from one of my fleet vehicles. It's a custom open air Tram with trailer that seats 20. The trailer has lights so it's street legal, but the way it's wired makes it very easy to wear away the insulation on the harness, so we have a weekly short that blows a fuse and kills the whole Tram in the middle of the smurfing road with a half a smurfing load of guests in their smurfing bathing suits that want my smurfing head! I made a code 3 run to the local hardware store and picked up some fuses to get it going again. My driver was very patient and kept most our guests laughing about it, but it still doesn't look good. Just one more reason I can justify wearing a Multi on my belt when I'm in dress slacks and polished shoes.

jerseydevil · **Reply #1999 on:** May 03, 2011, 03:01:35 PM

Used the awl on my Farmer to take a chunk out of my right thumb!

edcgear · **Reply #2000 on:** May 03, 2011, 03:12:14 PM

Ouch!!

But then, it isn't really yours untill it bites you...

thebullfrog · **Reply #2001 on:** May 03, 2011, 11:48:14 PM

SwissChamp's Phillips and Flathead drivers were used to help re-attach the side skirt of my GF's car.

Mike 208 · **Reply #2002 on:** May 04, 2011, 02:17:14 AM

Used the phillips on my LM Core to remove a taillight housing on a company vehicle, in order to replace a bulb.

Cyclone82 · **Reply #2003 on:** May 04, 2011, 10:48:21 AM

I used the scissors on a Work Champ to trim some cloth insulating sleeving on a motorcycle stator.
Tried to use the scissors on my LM PS4 to trim a finger nail but failed miserably. They are horrible scissors.

MeadMaker · **Reply #2004 on:** May 04, 2011, 01:59:58 PM

Quote from: Cyclone82 on May 04, 2011, 10:48:21 AM

I used the scissors on a Work Champ to trim some cloth insulating sleeving on a motorcycle stator.
Tried to use the scissors on my LM PS4 to trim a finger nail but failed miserably. They are horrible scissors.

That surprises me. I carried a PS4 while on vacation last month and used them to trim some toe nails. They worked very well. Accurate cut with no ragged edges. Were you trying to trim a finger nail on your right hand using the scissors in your left hand? They are right handed scissors.

Cyclone82 · **Reply #2005 on:** May 04, 2011, 04:08:15 PM

Using them in my right hand to cut nail on left. I just dont like how mine are very flimsy at the pivot and the lever sort of bottoms out on the main body of the tool. I dont like the feel/action of the scissors and they don't open up far. Maybe my nails are too tough! No way would i be able to cut a toe nail with these thats for sure.

GraysonK · **Reply #2006 on:** May 05, 2011, 12:34:57 AM

Ok, so it wasn't a SAK or a MT, but today in class my professor wanted to demonstrate something and said, "I wish I'd have brought a flashlight" so being the ever so helpful person I am, I got into my bag and pulled out...My Mini Mag! Yay! My classmates laughed, but hey, you gotta be prepared.

pipedreams · **Reply #2007 on:** May 05, 2011, 03:13:08 AM

Used the Cybertool to work on a hearing screener at work.

Sent from my iPhone using Tapatalk.

Ashley · **Reply #2008 on:** May 05, 2011, 05:31:18 AM

Used my swisstool rs to cut fibers from a flag that had ripped and became unattached from the string holding it and run the string through it so I could rehang it as my curtain. Yep you read that right in my room I have my blind then for my curtain I have a 2pac flag. So nice to be watched by a hot dead man sleeping. Lol

Cyclone82 · **Reply #2009 on:** May 05, 2011, 01:14:48 PM

Used the awseome PS4 knife blade to open a the plastic bag packaging around a sulphuric acid pack for a lead acid bike battery.

Hello Lurker! Remove this ad and much more by logging in.

What Did You Use Your Multitool For Today?

Donations

Community Links