Svord

Silentsniper441 · **Reply #60 on:** August 25, 2010, 05:37:59 PM

the cap lifter on my lm blast works GREAT for striking a metal match too.

Gareth · **Reply #61 on:** August 25, 2010, 06:54:21 PM

Quote from: Silentsniper441 on August 25, 2010, 05:37:59 PM

the cap lifter on my lm blast works GREAT for striking a metal match too.

Are you using the wire stripper notch or the edge of the can opener itself? I'd thought about the stripper notch before but I've not tried it.

AHB · **Reply #62 on:** August 25, 2010, 07:04:45 PM

Great job Tony

and Where's those pics John..?

Sparky415 · **Reply #63 on:** August 25, 2010, 07:21:17 PM

John

AHB
Thanks Mate
I have been trying to make another hammer handle so I have been whittling with it this afternoon, its lovely and sharp

John · **Reply #64 on:** August 25, 2010, 08:13:14 PM

Dudes what pictures?

AHB · **Reply #65 on:** August 25, 2010, 08:34:10 PM

Quote from: John on August 25, 2010, 08:13:14 PM

Dudes what pictures?

Quote from: John on August 24, 2010, 10:42:55 PM

i have a toxic green sword

Remember..?

Sparky415 · **Reply #66 on:** August 25, 2010, 08:34:43 PM

Quote from: sparky415 on August 24, 2010, 11:00:15 PM

If its modified Mate you had better stick a picture on this thread asap

John · **Reply #67 on:** August 25, 2010, 08:43:21 PM

Sparky415 · **Reply #68 on:** August 25, 2010, 09:57:21 PM

John,
Unless you have just bashed the end off with a lump hammer I think we need a picture Mate

John · **Reply #69 on:** August 25, 2010, 10:03:04 PM

Quote from: sparky415 on August 25, 2010, 09:57:21 PM

John,
Unless you have just bashed the end off with a lump hammer I think we need a picture Mate

I'm having trouble with pics today mate

i.e for starters I can't find my SD card for my dam phone

ryan1835 · **Reply #70 on:** August 25, 2010, 10:05:24 PM

nice coincidence there john

Sparky415 · **Reply #71 on:** August 25, 2010, 10:12:21 PM

John · **Reply #72 on:** August 25, 2010, 10:15:58 PM

You all know how this it going to end right?

ryan1835 · **Reply #73 on:** August 25, 2010, 10:23:13 PM

go on take a photo

i did give you a climber after all

John · **Reply #74 on:** August 26, 2010, 01:09:29 PM

Ok guys I've kept you waiting long enough,here's the pic you've been waiting for

Sparky415 · **Reply #75 on:** August 26, 2010, 01:52:19 PM

I like what you have done there Mate

John · **Reply #76 on:** August 26, 2010, 02:00:33 PM

Actually Tony it is just three inches but one thing the green scales dirty up very easily I'm thinking maybe I should have went for wood

Sparky415 · **Reply #77 on:** August 26, 2010, 02:44:42 PM

Wood is good!

But that green looks good and would be hard to loose

John · **Reply #78 on:** August 26, 2010, 02:53:05 PM

Yeah I guess the green does have that going for it,it kinda glows in grass,dirt or water hmm

SlackOne · **Reply #79 on:** August 26, 2010, 04:21:10 PM

In general, I don't care for peasant-pattern knives...I find them kind of unwieldy to carry folded with the big tang. But man...that little home-made one is just too sweet!

I'd do that to one of our kitchen knives, but my wife might use the mangled stub to skin me

Sparky415 · **Reply #80 on:** August 26, 2010, 06:12:15 PM

Thanks SlackOne!

I am very pleased with how it turned out but I now need to replace the pivot pin with something adjustable as it has loosened up a bit which is annoying
If you have the tools have a go its not too hard to turn out a usable knife
and you learn with every try,
(that's not the handle I started out with, its Mk2)
Have a look at yard sales for a decent old kitchen knife to play with

Sparky415 · **Reply #81 on:** September 01, 2010, 10:55:00 PM

I replaced the pivot pin

Neil · **Reply #82 on:** September 01, 2010, 11:24:45 PM

Do I get geek points for recognising where the pivot came from

Sparky415 · **Reply #83 on:** September 01, 2010, 11:28:31 PM

It come off in my hand

Neil · **Reply #84 on:** September 01, 2010, 11:30:24 PM

That can happen

Sparky415 · **Reply #85 on:** September 01, 2010, 11:35:37 PM

Its what's left over from another job that got started and went wrong

Neil · **Reply #86 on:** September 01, 2010, 11:42:03 PM

I would say I won't tell if you don't but I'm a bit late on that one

Spill the beans then.

Sparky415 · **Reply #87 on:** September 01, 2010, 11:55:48 PM

It just all went wrong, the bits have been sent to the dark end of my garage for another day

But I am chuffed with how my Svord clone turned out

Neil · **Reply #88 on:** September 01, 2010, 11:56:21 PM

Indeed it has turned out most fine

Sparky415 · **Reply #89 on:** September 02, 2010, 12:05:05 AM

I am sitting here doing this with it

(Obviously just the one blade)

Hello Lurker! Remove this ad and much more by logging in.

Svord

Donations

Community Links