Welcome to Multitool.Org!

Anthony · **Reply #300 on:** February 10, 2008, 11:35:22 PM

Welcome man,

Mike, Lord of the Spammers! · **Reply #301 on:** February 11, 2008, 09:09:48 AM

Welcome aboard mate

WhichDawg · **Reply #302 on:** February 13, 2008, 08:17:34 AM

Welcome ToolManTim, have you tried Shermans ice cream, your fellow statesman hasn't!

ToolManTim · **Reply #303 on:** February 14, 2008, 04:04:20 AM

Sorry, can't say as I have. Never heard of it. I'm always willing to try some ice cream, though! What's the story?

WhichDawg · **Reply #304 on:** February 14, 2008, 04:55:06 AM

it's a place in South Haven MI. It is the best Ice Cream I have ever had, and I'm from Chicago
where they have tons of the joints. If you go, notice the license plates from all over the country
in the parking lot. They should open in a month or two, take the kids and the neighbors kids, they'll
remember it forever.

ToolManTim · **Reply #305 on:** February 14, 2008, 04:59:16 AM

Well, seein' as how I live in Virginia now, it would be a pretty long road trip, but it sounds like the ice cream's worth it

We used to go to South Haven a lot when I was a kid, so maybe I have been but just don't remember it. I've still got family up there, so if I get back sometime and happen to get over that way, I'll be sure to stop in.

WhichDawg · **Reply #306 on:** February 14, 2008, 05:01:25 AM

your family should know about it. I'd go camping near South Haven and we'd always make a stop or two there.

J-sews · **Reply #307 on:** February 14, 2008, 05:35:44 AM

Tell you guys what; I'll be going down to South Haven this summer. I'll check out Sherman's Ice Cream while I'm there. If it is really as good as WD is making it out to be, I'll be happy to throw a couple scoops into an envelope and mail it to you.

WhichDawg · **Reply #308 on:** February 14, 2008, 06:44:16 AM

Quote from: J-sews on February 14, 2008, 05:35:44 AM

Tell you guys what; I'll be going down to South Haven this summer. I'll check out Sherman's Ice Cream while I'm there. If it is really as good as WD is making it out to be, I'll be happy to throw a couple scoops into an envelope and mail it to you.

as long as they look like a Charge, Diesel, or new shot show treat, I'd appreciate it!

do you have a large/big appetite Bob?

WhichDawg · **Reply #309 on:** February 14, 2008, 06:47:33 AM

the reason I ask is they have a belly-buster, hog feast or something and if you can finish it you get a prize (T-Shirt I think) or something.
and they have the biggest cones ever! the triple scoop or such, you'll see.

J-sews · **Reply #310 on:** February 15, 2008, 04:20:25 AM

Quote from: WhichDawg on February 14, 2008, 06:47:33 AM

the reason I ask is they have a belly-buster, hog feast or something and if you can finish it you get a prize (T-Shirt I think) or something.
and they have the biggest cones ever! the triple scoop or such, you'll see.

Expect a full review on it later this summer!

WhichDawg · **Reply #311 on:** February 16, 2008, 05:16:58 PM

man I miss that place! if you go on the weekend, expect lines, but they move pretty good (lotta workers)
they have 2 sections, you can go inside and get a number or just get in line outside (we do both!)
I recommend any fruit flavor (i.e. coconut, pineapple, strawberry-cheesecake etc.) and their pistachio omg!

bruner · **Reply #312 on:** March 09, 2008, 12:06:55 AM

Hi,

My name is Dan. Some might know me from EDCForums.com. I'm a moderator over there.

I have a passion for all things mechanical. I have a small collection of multitools, but if I stick around here long, that might change

I've been diving into the reviews forum and learning about a lot of tools I never knew existed.

This looks like a great forum with good people. I hope to be able to contribute.

Thanks,
Dan

Benner · **Reply #313 on:** March 09, 2008, 12:10:25 AM

Great to have you here Dan. Welcome.

WhichDawg · **Reply #314 on:** March 09, 2008, 12:10:33 AM

Welcome Dan (I'm Dan too

) glad you could join us

whatcha got? and what are your favs? tell tell

J-sews · **Reply #315 on:** March 09, 2008, 12:34:02 AM

Ahhh, another guy with bulging pockets! Welcome Dan!

WhichDawg · **Reply #316 on:** March 09, 2008, 12:35:17 AM

Quote from: J-sews on March 09, 2008, 12:34:02 AM

Ahhh, another guy with bulging pockets! Welcome Dan!

(wants to make a joke but bites fingers!)

Grant Lamontagne · **Reply #317 on:** March 09, 2008, 01:46:24 AM

Quote from: bruner on March 09, 2008, 12:06:55 AM

Hi,

My name is Dan. Some might know me from EDCForums.com. I'm a moderator over there.

I have a passion for all things mechanical. I have a small collection of multitools, but if I stick around here long, that might change

I've been diving into the reviews forum and learning about a lot of tools I never knew existed.

This looks like a great forum with good people. I hope to be able to contribute.

Thanks,
Dan

Good to have you man! I'm not a member at EDCForums.com but many here are, so I'll just assume you already know who to avoid!

I've been working at updating the Reviews section and some other items on the main site, so feel free to check back often and/or make and comments or requests. If I can do it, I probably will!

Def

Mike, Lord of the Spammers! · **Reply #318 on:** March 09, 2008, 09:29:57 AM

Welcome aboard Dan, your in good company here

bruner · **Reply #319 on:** March 10, 2008, 01:05:47 AM

Thanks for the kind welcome

Well, I have about 14 multitools, nothing too fancy. I just posted my collection photos HERE.

My favorites right now would have to be my Gerber Clutch, LM Micra and LM Squirt P4. The P4 is new and I had not taken photos of it just yet.

Strange thing is that I never considered tools like SAK's to be multitools until just recently. I'm not sure why I thought like that...

Multitools that I look forward to someday having would be: LM Wave, LM Xe6, SOG PowerLock, Gerber Flik (I like this one especially after reading a review of it here on your forum).

There are plenty of older tools that I am interested in too.

Yes, my pockets are bulging, but sadly not with cash

Dan

J-sews · **Reply #320 on:** March 10, 2008, 01:40:34 AM

Quote from: bruner on March 10, 2008, 01:05:47 AM

......Yes, my pockets are bulging, but sadly not with cash

Dan

That seems to be a common affliction around here.

WhichDawg · **Reply #321 on:** March 10, 2008, 02:02:06 AM

Quote

I like this one especially after reading a review of it here on your forum

omg if that ain't the truth! so many good reviews and pics here; all I need is the fire blast behind me
and a jab with a multitool pitchfork!

WH867 · **Reply #322 on:** March 20, 2008, 05:00:31 AM

Hello, My name is Dennis, from W. central Ohio. I finally joined after lurking for a month or so. I found this site while looking for info on a possible new tool purchase. Love the reviews .
I have several MTs but have mostly carried a Gerber blunt nose 600 for the last several years until recently. Lately I have been carrying a Freehand. I have mostly Gerbers, and a couple Leathermans. Plus I have a Sog on order. Would also Like to try a Vic when finances allow.
My main hobby is antique Wheel Horse garden tractors(collecting,trading,restoring). thats what my MTs get used for the most during the warm months of the year . I think thats enough for now. I dont usually talk this much. But I have really been enjoying this site and forum. Thanks,

Dennis

edap617 · **Reply #323 on:** March 20, 2008, 05:13:15 AM

Welcome to the forum, Dennis.

WhichDawg · **Reply #324 on:** March 20, 2008, 05:34:34 AM

Welcome Dennis! we'd luv some pictures of your tractors, that would be cool

Mike, Lord of the Spammers! · **Reply #325 on:** March 20, 2008, 10:42:49 AM

Welcome to the forum mate

It would be nice to see some pictures mate

Benner · **Reply #326 on:** March 20, 2008, 12:07:27 PM

Great to have you on board.

Grant Lamontagne · **Reply #327 on:** March 20, 2008, 02:25:32 PM

That's fascinating- I always thought that the blunt nosed models were more useful than the semi-needle nosed models that are more commonly available from every brand. One of the reasons I've always been such a fan of the SwissGrip is because it's a blunt nose. With the older Gerbers like the MP600 it makes more sense since the plier tips don't stick out the end like the needle nose variants do.

Another thing I find fascinating is not only hearing what tools people prefer, but also the vast number of things that folks use multitools for on a regular basis! Antique tractors are a new one around here, but we do have a pretty broad range of uses with other members. Half the fun isn't in what tool someone uses, so much as what it's used for!

Glad to have you aboard and thanks for taking the time to register and say Hi!

Def

J-sews · **Reply #328 on:** March 21, 2008, 03:08:24 AM

Welcome Dennis From Ohio, it's good to have you here! (even though you are from Ohio)

~Bob From Michigan

WH867 · **Reply #329 on:** March 21, 2008, 05:08:52 AM

Time to try the picture thing. If all goes as planned there will be a 1956 RJ35,a 1958 RJ58,and a 1967 model 867 which is the one that started the madness.

Hello Lurker! Remove this ad and much more by logging in.

Welcome to Multitool.Org!

Donations

Community Links