WITHDRAWN: 2011 Flashlight/Torch Sale! *Price drop*

[NutSAK]

All prices are shipped CONUS or Canada.  International shipping will be subject to extra fees.  Payment must be made via Paypal.

The first unconditional "I'll take it" posted for each item will have priority.



1.  ^Fenix L2D-CE  I've owned many L2Ds and, though is is one of the early P4-bin models, it's the best one I've had. It has the smooth reflector with very little "cree ring".  It has been used, so there are a few dings as seen in the photo.  $35 $30





2. ^JetBeam C-LE v1.2 This is a great little AA twisty.  This v1.2 has the mode memory.  It has a couple of small nicks in the ano on the edge of the tail, otherwise in very good condition.  $30 $25





3. ^JetBeam Jet-III M Neutral w/Olight M20 diffuser  I've used this one very little, and the condition reflects that.  A couple of tiny spots on the high points of the knurling and paint wear on the clip, but excellent otherwise.  It has the smooth reflector for excellent throw, and beautiful neutral tint.  This is the best built Chinese light I've seen yet.  $60 $55





4. ^Lumapower M1-T w/extra smooth reflector  This is the original Cree XR/E model w/natural HA finish, compatible with 2xCR123 and 18650.  It's been used a little, so there are some nicks around the bezel, tail and clip edges.  The Orange peel reflector and two-stage reverse-clicky switch are installed, but I will include a smooth reflector, twist/momentary switch, GID and black switch boots, all in original box.  $45





5. ^Lumapower M1-T/R This is the Rebel 100 version, HA natural finish, compatible with 2xCR123 and 18650.  This one has seen very little use, and is in excellent condition.  It has the orange peel reflector.  Price includes forward clicky, two-stage reverse clicky, twist/momentary switch, clip and GID and black switch boots in original box.  $50 $45





6.  ^Maratac AAA SS  In good used condition--some wear on lanyard ring and where pocket clip touches body. $25 $20 SOLD pending funds

7.  ^Maratac AAA HAIII Modified w/XP-G neutral emitter.  In great condition, w/GID epoxy added to tail. $30





8. ^NiteCore Smart PD D10 R2 Tribute NIB $75





9. ^NiteCore Smart PD D20 Q5 Like new, no box. Ramping UI.  $50





10. ^Peak LED Solutions Baltic Sea (XLR/N) Luxeon emitter, powered by N cell.  Excellent condition  $15







11.  ^Peak Baltic Sea SS (XLR/AAA)  Luxeon emitter, AAA powered, with extra long runtime.  There's a small ding in the body as shown in pic, otherwise excellent. $30





12.  ^River Rock 1.5W Lantern  Used, with a few light scratches on the globe, but nothing to affect performance.  Powered by 4AA.  $15

[Sazabi]

Maybe my search-fu is poor tonight, but what light output and run time would you say number 10 has?  It looks interesting....

[NutSAK]

Maybe my search-fu is poor tonight, but what light output and run time would you say number 10 has?  It looks interesting....

Even mighty powers of search-fu will often not reveal the mysteries of the Peak, grasshoppa.  (which is unfortunate) 

I would estimate the output at 3-5 lumens, or slightly less than a Gerber Infinity Ultra, and the runtime at somewhere around 10 hours.  It's hard to be accurate with these estimates at low output, but the output is similar to #11, which has a (Peak-quoted) runtime of 18 hours.  The N cell typically has about 70% of the capacity of a AAA cell. 

The heads & bodies of #10 and #11 are swappable.

[Sazabi]

Maybe my search-fu is poor tonight, but what light output and run time would you say number 10 has?  It looks interesting....

Even mighty powers of search-fu will often not reveal the mysteries of the Peak, grasshoppa.  (which is unfortunate) 

I would estimate the output at 3-5 lumens, or slightly less than a Gerber Infinity Ultra, and the runtime at somewhere around 10 hours.  It's hard to be accurate with these estimates at low output, but the output is similar to #11, which has a (Peak-quoted) runtime of 18 hours.  The N cell typically has about 70% of the capacity of a AAA cell. 

The heads & bodies of #10 and #11 are swappable.

Well I did make it to Peak's "website," and found their sub-page directory, which did help, but didn't find any named Baltic Sea that ran on an N cell, hence my question. 

Hmm, someone else please get it before I change my mind. XD  I know a pack of 6 N cells can be purchased rather cheaply from Amazon, but I also like the option of finding locally sourced cells, too, if needed.  Watch me change my mind.

[NutSAK]

Maybe my search-fu is poor tonight, but what light output and run time would you say number 10 has?  It looks interesting....

Even mighty powers of search-fu will often not reveal the mysteries of the Peak, grasshoppa.  (which is unfortunate) 

I would estimate the output at 3-5 lumens, or slightly less than a Gerber Infinity Ultra, and the runtime at somewhere around 10 hours.  It's hard to be accurate with these estimates at low output, but the output is similar to #11, which has a (Peak-quoted) runtime of 18 hours.  The N cell typically has about 70% of the capacity of a AAA cell. 

The heads & bodies of #10 and #11 are swappable.

Well I did make it to Peak's "website," and found their sub-page directory, which did help, but didn't find any named Baltic Sea that ran on an N cell, hence my question. 

Hmm, someone else please get it before I change my mind. XD  I know a pack of 6 N cells can be purchased rather cheaply from Amazon, but I also like the option of finding locally sourced cells, too, if needed.  Watch me change my mind.

Yeah, their "website" isn't worth much.  Peak has so many combinations available that it would be difficult to design a website around their products.  They could certainly make a better attempt than they have, though.    The Peak CPF forum is the best outlet for info.

"Baltic" is basically the name of the head.  The Baltic head will work with all bodies available for the Baltic or the Shasta.  Shasta is typically sold with N cell bodies.

[Sazabi]

Ah, I see.

Yeah, all it would take for them to create a better site would be a couple hours time.  Granted, I realize they're a metalworking company first and foremost, so I suppose that makes sense.

What kind of keychain attachment, if any, does that light have? >.>

[NutSAK]

None.  That one is a "pocket" body.

[ari6126]

Are there going to be more lights in this thread or is this it?

[NutSAK]

Are there going to be more lights in this thread or is this it?

There's a possibility for more.  Is there something you're looking for in particular?

[ari6126]

Are there going to be more lights in this thread or is this it?

There's a possibility for more.  Is there something you're looking for in particular?

Nope. Just wondering.

[NutSAK]

There's not much moving here.

How about a price drop? 

[jekostas]

Sent you a PM

[NutSAK]

Sent you a PM

replied

[NutSAK]

I will be posting these on CPF very soon.  Some of them probably won't last long there.

[Mike, Lord of the Spammers!]

I will be posting these on CPF very soon.  Some of them probably won't last long there.

Come on guys these are fantastic pieces!

[NutSAK]

#6 SOLD pending funds

[NutSAK]

The remaining lights are withdrawn from sale.