SOG wire stripper dimensions

Rebelgium · **on:** August 08, 2011, 10:19:35 AM

Hi
I'm doing some research to see if it'd be possible to fit/mod a SOG wire stripper

Into a Leatherman Charge. I'd do this by replacing the saw or serrated knife with the wire strippers.

But to work out if this is possible I need the exact measurements of the dimensions of the wire stripper:
-Width
-Length
-Depth
-hole diameter

So if you have the wire stripper, plz measure!
Thanks

sardauker · **Reply #1 on:** August 08, 2011, 09:12:00 PM

Quote from: Rebelgium on August 08, 2011, 10:19:35 AM

Hi
I'm doing some research to see if it'd be possible to fit/mod a SOG wire stripper
(Image removed from quote.)
Into a Leatherman Charge. I'd do this by replacing the saw or serrated knife with the wire strippers.
(Image removed from quote.)

But to work out if this is possible I need the exact measurements of the dimensions of the wire stripper:
-Width
-Length
-Depth
-hole diameter

So if you have the wire stripper, plz measure!
Thanks

Yes, I have. I have widened the hole to fit into a swisstool, so I can't tell for sure. 3.5 or 4.5mm-ish, I suppose, originally.

the two pieces are 1mm each, then between 2 and 2.1 when assembled. the L-shaped "stop" is 4mm in depth * 19

all together, the two pieces in closed position are 16mm* 72mm

I hope to have helped.