Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


wrench knife

ray rantanen · 12 · 2674
« previous next »
Pages: 1   Go Down

Offline ray rantanen

  • New User
    • Posts: 1
wrench knife
on: December 09, 2007, 07:24:29 PM
I was asked by a member to talk about a wrench knife I have come up with. I have been making knives since 1974 in one form or another so I looked at the 6 inch crescent wrench I had laying around and decided to make a knife out of it. I cut the eye off the end and forged a blade. Care must be taken not to heat the wrench part during this process. I spark tested the handle and thought it had a good carbon content. I quenched in oil and then drew a temper- purple on the back of the blade and straw on the cutting edge. Made a very unique tool. The sheath I made is intended to be held when using the wrench as a wrench without cutting your hand. Still thinking on a cover for the blade that will fit in the sheath.

england Offline Benner

  • Global Tuffy
  • *
  • Absolute Zombie Club
  • *********
    • Posts: 28,081
  • Just Awesome! And a Slayer of Polar Bear!
Re: wrench knife
Reply #1 on: December 09, 2007, 07:26:31 PM
Bloody good job you did there my friend!

Welcome to the forum.  It's great to see interesting stuff like that on here.
I'm back!!

ca Offline Grant Lamontagne

  • Head Turd Polisher
  • Administrator
  • *
  • Just Bananas
  • *
    • Posts: 69,090
  • Optimum instrumentum est inter aures
Re: wrench knife
Reply #2 on: December 09, 2007, 07:33:06 PM
I agree- that's a pretty fascinating tool you've created!

Just out of curiosity, how did you manage to heat treat the handle but not the wrench head?  That must have been a heck of a process!

Welcome to Multitool.org!

Def
Listen to the Official Podcast of Multitool.org:

It's The Podcast You Never Knew You Needed brought to you by The Only Forum That Matters!
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a thread with a photo of a repair you made with duct tape Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns) Start a thread with a photo of at least ten OPT's in your collection Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least eight BO tools Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread showing photos of your outdoor cooking Must have a review written in the proper format and posted on the Main Site Start a new thread with a photo of at least 5 different Charge models in your collection

gb Offline Roadie

  • No Life Club
  • ******
    • Posts: 4,532
  • Hello...is this thing on?
Re: wrench knife
Reply #3 on: December 09, 2007, 08:02:41 PM
KnifeWrench!! (for those that have watched Scrubs that will make sense!) I never thought anyone would make one of these! I 'm very impressed sir!
Life is like a sandwich...the older it gets the crustier it becomes!

ca Offline Grant Lamontagne

  • Head Turd Polisher
  • Administrator
  • *
  • Just Bananas
  • *
    • Posts: 69,090
  • Optimum instrumentum est inter aures
Re: wrench knife
Reply #4 on: December 09, 2007, 08:10:48 PM
The design reminds me of the Weske bicycle knife somewhat... I'll have to see if I can dig up the pics I have of one because I can't find it online....

Def
Listen to the Official Podcast of Multitool.org:

It's The Podcast You Never Knew You Needed brought to you by The Only Forum That Matters!
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a thread with a photo of a repair you made with duct tape Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns) Start a thread with a photo of at least ten OPT's in your collection Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least eight BO tools Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread showing photos of your outdoor cooking Must have a review written in the proper format and posted on the Main Site Start a new thread with a photo of at least 5 different Charge models in your collection

Offline Leatherman123

  • Absolutely No Life Club
  • *******
    • Posts: 6,568
Re: wrench knife
Reply #5 on: December 09, 2007, 08:13:07 PM
Very impressive!
B

Offline Anthony

  • No Life Club
  • ******
    • Posts: 3,994
  • Improvise.
Re: wrench knife
Reply #6 on: December 09, 2007, 09:01:01 PM
That looks great!
[

gb Offline Mike, Lord of the Spammers!

  • Chief of the Absolutely No Life Club!
  • *
  • Abandon All Hope Ye Who Enter Here...
  • ***********
    • Posts: 42,975
  • Why haven't you got a Farmer yet!
Re: wrench knife
Reply #7 on: December 09, 2007, 09:14:57 PM
Great idea mate, and welcome to the forum :)
Give in, buy several Farmer's!!!!!!

ca Offline Grant Lamontagne

  • Head Turd Polisher
  • Administrator
  • *
  • Just Bananas
  • *
    • Posts: 69,090
  • Optimum instrumentum est inter aures
Re: wrench knife
Reply #8 on: December 09, 2007, 10:05:20 PM
I was hoping you'd chime in- if it weren't for you I wouldn't even know what the Weske bicycle knife was!

Def
Listen to the Official Podcast of Multitool.org:

It's The Podcast You Never Knew You Needed brought to you by The Only Forum That Matters!
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a thread with a photo of a repair you made with duct tape Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns) Start a thread with a photo of at least ten OPT's in your collection Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least eight BO tools Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread showing photos of your outdoor cooking Must have a review written in the proper format and posted on the Main Site Start a new thread with a photo of at least 5 different Charge models in your collection

us Offline J-sews

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 23,224
Re: wrench knife
Reply #9 on: December 10, 2007, 01:26:45 AM
As a matter of fact Ray does make these for sale. He's got a couple different sizes listed on eBay right now, along with some other fine looking cutlery. (Just do a search for Rantanen Custom)

Nice work Ray, I'll be wanting to get one of those from you  :)

Bob
In order to be certain of having the right tool for every job.........one must first acquire a lot of tools

us Offline J-sews

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 23,224
Re: wrench knife
Reply #10 on: December 12, 2007, 12:10:07 AM
Ray sent me a photo of his 6" wrench knife alongside the smaller 4" model.

I'm leaning towards the 4" myself  :)
In order to be certain of having the right tool for every job.........one must first acquire a lot of tools

us Offline Spoonrobot

  • No Life Club
  • ******
    • Posts: 1,894
Re: wrench knife
Reply #11 on: December 12, 2007, 03:00:22 AM
Quote from: Roadie on December 09, 2007, 08:02:41 PM
KnifeWrench!! (for those that have watched Scrubs that will make sense!) I never thought anyone would make one of these! I 'm very impressed sir!

 :ahhh

I though the exact same thing!

Pages: 1   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
May Goal: $300.00
Due Date: May 31
Total Receipts: $86.45
PayPal Fees: $5.07
Net Balance: $81.38
Below Goal: $218.62
Site Currency: USD
27% 
May Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal