Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


And so it begins.... (My adventures into Alox!)

Syph007 · 6035 · 1299769
« previous next »
Pages: 1 ... 38 39 40 41 42 ... 202   Go Down

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 38,349
  • Plumbers Know Their Crap!!
Re: And so it begins.... (My adventures into Alox!)
Reply #1170 on: June 07, 2013, 07:18:25 PM
Another great job, hey if it had blue scales and the red liners, i guess it could kinda go patriotic, no? JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your zip ties in use Start a new thread with photos of your titanium gear with a multitool or sak Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread showing photos of at least 3 different sporks in use

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #1171 on: June 07, 2013, 07:22:19 PM
Quote from: MadPlumbarian on June 07, 2013, 07:18:25 PM
Another great job, hey if it had blue scales and the red liners, i guess it could kinda go patriotic, no? JR

Someone asked me to build a SAK with a white front scale, blue back, and red liners.  I think that would be a pretty US color scheme.
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline captain spaulding

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 20,793
  • What's the matter, kid? Don't ya like clowns?
Re: And so it begins.... (My adventures into Alox!)
Reply #1172 on: June 07, 2013, 08:14:51 PM
Quote from: Syph007 on June 07, 2013, 07:22:19 PM
Quote from: MadPlumbarian on June 07, 2013, 07:18:25 PM
Another great job, hey if it had blue scales and the red liners, i guess it could kinda go patriotic, no? JR

Someone asked me to build a SAK with a white front scale, blue back, and red liners.  I think that would be a pretty US color scheme.


Did you end up doing it?
I'm the milk man!

Offline rshives

  • Newbie
  • *
    • Posts: 12
Re: And so it begins.... (My adventures into Alox!)
Reply #1173 on: June 07, 2013, 08:26:56 PM
I'm the one that asked him for the red/white/blue SAK.  I'm saving up to purchase one.  But if anyone can already afford it don't wait for me.

hr Offline enki_ck

  • Global Moderator
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,935
  • I may get older but I refuse to grow up.
Re: And so it begins.... (My adventures into Alox!)
Reply #1174 on: June 07, 2013, 09:19:33 PM
Welcome to the forum. :cheers:
Merit Badges Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least 5 different Juice models in your collection Must update or add a page on SAKWiki Must put something in order and provide link to the post. Must update or add a page on the Multitool.org Multitool Encyclopedia Must buy something on EDCSource Start a new thread with a photo of custom or non standard SAK scales in your collection Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC

Offline rshives

  • Newbie
  • *
    • Posts: 12
Re: And so it begins.... (My adventures into Alox!)
Reply #1175 on: June 07, 2013, 09:20:48 PM
Me?  Thank you.

us Offline captain spaulding

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 20,793
  • What's the matter, kid? Don't ya like clowns?
Re: And so it begins.... (My adventures into Alox!)
Reply #1176 on: June 08, 2013, 02:25:04 AM
Quote from: rshives on June 07, 2013, 08:26:56 PM
I'm the one that asked him for the red/white/blue SAK.  I'm saving up to purchase one.  But if anyone can already afford it don't wait for me.


I was just wondering because I wanted to see it.  :) I think its a good idea and the color scheme should be good.
I'm the milk man!

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #1177 on: June 10, 2013, 02:55:39 PM
This one started as an Elinox solo, but it got expanded to 2 layers with a brass liner and spacer.  :D





« Last Edit: May 10, 2015, 07:50:35 PM by Syph007 »
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

de Offline crackout

  • Hero Member
  • *****
    • Posts: 864
Re: And so it begins.... (My adventures into Alox!)
Reply #1178 on: June 10, 2013, 02:58:31 PM
Oh nice, with the original blade!
Say my name.

hr Offline enki_ck

  • Global Moderator
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,935
  • I may get older but I refuse to grow up.
Re: And so it begins.... (My adventures into Alox!)
Reply #1179 on: June 10, 2013, 03:09:15 PM
One day ... :drool:
Merit Badges Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least 5 different Juice models in your collection Must update or add a page on SAKWiki Must put something in order and provide link to the post. Must update or add a page on the Multitool.org Multitool Encyclopedia Must buy something on EDCSource Start a new thread with a photo of custom or non standard SAK scales in your collection Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #1180 on: June 10, 2013, 08:20:55 PM
Some additions to a stock black pioneer.  This phillips was one of the new style that I recently discovered and Im pleased to say that they do indeed work better than the other kind, so it's been a nice change by Vic.







« Last Edit: May 10, 2015, 07:50:44 PM by Syph007 »
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #1181 on: June 10, 2013, 08:25:31 PM
Beautiful work Syph :salute: :tu:  I'm glad to hear that the new phillips design works well. 
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Start a new thread with photos of your titanium gear with a multitool or sak Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Must start a thread with a photo of your EDC watch Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Offline Nhoj

  • *
  • No Life Club
  • ******
    • Posts: 2,791
Re: And so it begins.... (My adventures into Alox!)
Reply #1182 on: June 10, 2013, 08:28:23 PM
Good you got me worried when you discovered it.

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 38,349
  • Plumbers Know Their Crap!!
Re: And so it begins.... (My adventures into Alox!)
Reply #1183 on: June 10, 2013, 08:32:16 PM
Another great mod :clap: gets me more and more excited!! JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your zip ties in use Start a new thread with photos of your titanium gear with a multitool or sak Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread showing photos of at least 3 different sporks in use

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #1184 on: June 10, 2013, 08:35:57 PM
Quote from: MadPlumbarian on June 10, 2013, 08:32:16 PM
Another great mod :clap: gets me more and more excited!! JR

I'm very excited ;)
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Start a new thread with photos of your titanium gear with a multitool or sak Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Must start a thread with a photo of your EDC watch Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 38,349
  • Plumbers Know Their Crap!!
Re: And so it begins.... (My adventures into Alox!)
Reply #1185 on: June 10, 2013, 08:39:08 PM
Quote from: Monrogue on June 10, 2013, 08:35:57 PM
Quote from: MadPlumbarian on June 10, 2013, 08:32:16 PM
Another great mod :clap: gets me more and more excited!! JR

I'm very excited ;)
I hope so! JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your zip ties in use Start a new thread with photos of your titanium gear with a multitool or sak Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread showing photos of at least 3 different sporks in use

mx Offline Chaka

  • Full Member
  • ***
    • Posts: 186
Re: And so it begins.... (My adventures into Alox!)
Reply #1186 on: June 11, 2013, 03:37:01 AM
Pardon my ignorance.

What's new about the new Phillips?

Sent from my GT-S5830i using Tapatalk 2


us Offline Nhoj

  • *
  • No Life Club
  • ******
    • Posts: 2,791
Re: And so it begins.... (My adventures into Alox!)
Reply #1187 on: June 11, 2013, 03:59:52 AM
Quote from: Chaka on June 11, 2013, 03:37:01 AM
Pardon my ignorance.

What's new about the new Phillips?

Sent from my GT-S5830i using Tapatalk 2

Here you go
http://forum.multitool.org/index.php?topic=45331

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #1188 on: June 16, 2013, 08:48:19 PM
I just got in a new run of hard anodized blue parts and they are sweeeet.  Slightly darker shade than my last run, and it looks super nice.

Here is an old school electrician done up with the nice blue scales, polished backsprings and Ti liners/keyring.  :D











Cheers
« Last Edit: May 10, 2015, 07:50:55 PM by Syph007 »
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 38,349
  • Plumbers Know Their Crap!!
Re: And so it begins.... (My adventures into Alox!)
Reply #1189 on: June 16, 2013, 11:32:46 PM
B-E-A-U-T-I-F-U-L :tu: as normal, JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your zip ties in use Start a new thread with photos of your titanium gear with a multitool or sak Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread showing photos of at least 3 different sporks in use

gb Offline nuphoria

  • Ambidangerous Mistress of Mod
  • Admin Team
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,038
  • I'm not all bad, I'm just drawn that way.
Re: And so it begins.... (My adventures into Alox!)
Reply #1190 on: June 17, 2013, 12:14:23 AM
They are a great colour... lovely stuff :tu:
A dyslexic man walks in to a bra...

All my music for free: http://soundcloud.com/chrissyvandyke

ca Offline derekmac

  • *
  • Zombie Apprentice
  • ********
    • Posts: 16,707
  • Little to the right...
Re: And so it begins.... (My adventures into Alox!)
Reply #1191 on: June 17, 2013, 12:17:15 AM
I think that blue is one of my favorite colors that you've done so far Robert!  Looks great!
Merit Badges Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Start a new thread demonstrating paracord knot tying Start a new thread and post a picture of fire making kit or fire with a multitool Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least three BO tools

us Offline Marius

  • No Life Club
  • ******
    • Posts: 1,544
Re: And so it begins.... (My adventures into Alox!)
Reply #1192 on: June 17, 2013, 12:52:40 AM
He he. Nice one! Mine was first ;) From 2012:
Merit Badges Must buy something on EDCSource Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a thread with photos of at least twelve different colored ALOX models in your collection Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must start a thread with a photo of your EDC watch Must start a thread with a photo of at least three (3) of your watches Must start a thread with a photo of at least five (5) of your watches

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #1193 on: June 17, 2013, 02:25:49 AM
Would that sweet blue one be yours JR? :D
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Start a new thread with photos of your titanium gear with a multitool or sak Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Must start a thread with a photo of your EDC watch Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #1194 on: June 17, 2013, 03:02:46 AM
Quote from: Monrogue on June 17, 2013, 02:25:49 AM
Would that sweet blue one be yours JR? :D

His is red. :D

I got the cadet nail file and blade working in the main layer today.  I needed a custom made spring and the catch was that since that spring is stronger than a cadet one, I had to take a bit off the nail file pivot to allow easier opening.  Otherwise it's a super nail breaker.
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline Corso

  • Full Member
  • ***
    • Posts: 135
Re: And so it begins.... (My adventures into Alox!)
Reply #1195 on: June 17, 2013, 04:52:13 AM
Quote from: Syph007 on June 17, 2013, 03:02:46 AM
Quote from: Monrogue on June 17, 2013, 02:25:49 AM
Would that sweet blue one be yours JR? :D

His is red. :D

I got the cadet nail file and blade working in the main layer today.  I needed a custom made spring and the catch was that since that spring is stronger than a cadet one, I had to take a bit off the nail file pivot to allow easier opening.  Otherwise it's a super nail breaker.

Ah, cool.  Your mod that has the openers and Phillips in one layer, can the awl replace the can opener?  Then we could have the nail file and the awl together on the 93mm chassis.

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 38,349
  • Plumbers Know Their Crap!!
Re: And so it begins.... (My adventures into Alox!)
Reply #1196 on: June 17, 2013, 05:48:33 AM
Quote from: Syph007 on June 17, 2013, 03:02:46 AM
Quote from: Monrogue on June 17, 2013, 02:25:49 AM
Would that sweet blue one be yours JR? :D

His is red. :D

I got the cadet nail file and blade working in the main layer today.  I needed a custom made spring and the catch was that since that spring is stronger than a cadet one, I had to take a bit off the nail file pivot to allow easier opening.  Otherwise it's a super nail breaker.
Nope, RED! He he, but thanks for the update! So it breaks the nail and then you can file it :D works for me :tu: lol JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your zip ties in use Start a new thread with photos of your titanium gear with a multitool or sak Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread showing photos of at least 3 different sporks in use

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #1197 on: June 19, 2013, 01:38:00 AM
More blue today. :D











« Last Edit: May 10, 2015, 07:51:07 PM by Syph007 »
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 38,349
  • Plumbers Know Their Crap!!
Re: And so it begins.... (My adventures into Alox!)
Reply #1198 on: June 19, 2013, 01:46:06 AM
Nice job syph, I'm getting goose bumps waiting! No sneak peeks? :D JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your zip ties in use Start a new thread with photos of your titanium gear with a multitool or sak Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread showing photos of at least 3 different sporks in use

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #1199 on: June 19, 2013, 01:50:00 AM
Quote from: MadPlumbarian on June 19, 2013, 01:46:06 AM
Nice job syph, I'm getting goose bumps waiting! No sneak peeks? :D JR

I got your brass liners cut today. :D  Its currently in the rough assembly stage where I do the fitup on long brass pins, then belt grind the back to make all the springs and liners nice and flush.  Then I take it all apart and hand finish each spring and liner, then polish.  Then I do the final assembly. 
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

Pages: 1 ... 38 39 40 41 42 ... 202   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $115.65
PayPal Fees: $7.03
Net Balance: $108.62
Below Goal: $191.38
Site Currency: USD
36% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal