Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


And so it begins.... (My adventures into Alox!)

Syph007 · 6008 · 1077223
« previous next »
Pages: 1 ... 121 122 123 124 125 ... 201   Go Down

gr Offline Sakpan74Gr

  • Full Member
  • ***
    • Posts: 215
Re: And so it begins.... (My adventures into Alox!)
Reply #3660 on: April 06, 2016, 09:53:53 PM
Syph, are your 91 Ti and Alox customs thinner than the original models? If so, how much thinner?

Στάλθηκε από το YOGA Tablet 2-830F μου χρησιμοποιώντας Tapatalk


ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3661 on: April 06, 2016, 10:08:44 PM
Quote from: Sakpan74Gr on April 06, 2016, 09:53:53 PM
Syph, are your 91 Ti and Alox customs thinner than the original models? If so, how much thinner?

Στάλθηκε από το YOGA Tablet 2-830F μου χρησιμοποιώντας Tapatalk

Yes they are thinner.  I measured a standard super tinker and my Ti converted one and its 0.120" thinner.  That's about the thickness of a pliers layer.  Its noticeable for sure.
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,285
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #3662 on: April 06, 2016, 10:11:43 PM
More beauties Syph!

Sent from my SM-G920R4 using Tapatalk

K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Start a new thread with photos of your titanium gear with a multitool or sak Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your birth year SAK Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your EDC watch Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

gr Offline Sakpan74Gr

  • Full Member
  • ***
    • Posts: 215
Re: And so it begins.... (My adventures into Alox!)
Reply #3663 on: April 07, 2016, 05:01:04 AM
So a Deluxe Tinker will be as thin as a Super Tinker and a Craftsman as a Ranger! Amazing!

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3664 on: April 07, 2016, 04:01:43 PM
 :ahhh  :ahhh  :ahhh

My Tormach is going to be at the local shippers warehouse tomorrow! I need to call for a delivery appointment, but Im pretty damn excited!
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

wales Offline magentus

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,391
  • mmmmm SAKrelicious
Re: And so it begins.... (My adventures into Alox!)
Reply #3665 on: April 07, 2016, 04:07:22 PM
Quote from: Syph007 on April 07, 2016, 04:01:43 PM
:ahhh  :ahhh  :ahhh

My Tormach is going to be at the local shippers warehouse tomorrow! I need to call for a delivery appointment, but Im pretty damn excited!
:woohoo: :woohoo: :woohoo: :woohoo:
'Use the force Harry' - Gandalf
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Test,please ignore Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo showing the Hook in use Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

ca Offline Lardlad

  • Jr. Member
  • **
    • Posts: 76
Re: And so it begins.... (My adventures into Alox!)
Reply #3666 on: April 07, 2016, 05:08:51 PM
So am I - can't wait to see what you do with it.

Quote from: Syph007 on April 07, 2016, 04:01:43 PM
:ahhh  :ahhh  :ahhh

My Tormach is going to be at the local shippers warehouse tomorrow! I need to call for a delivery appointment, but Im pretty damn excited!

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,285
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #3667 on: April 07, 2016, 07:03:40 PM
That's great Syph, but my wallet cries at the thought of the great things you will create :ahhh

Sent from my SM-G920R4 using Tapatalk

K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Start a new thread with photos of your titanium gear with a multitool or sak Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your birth year SAK Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your EDC watch Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3668 on: April 08, 2016, 10:03:27 PM
I called the shipping company, no delivery until mon or tuesday... oh well.

I did build another alox mod today though.  :D







PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 67,965
Re: And so it begins.... (My adventures into Alox!)
Reply #3669 on: April 08, 2016, 10:29:23 PM
Very nice,  I like that one  :cheers:
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month.

ca Offline Lardlad

  • Jr. Member
  • **
    • Posts: 76
Re: And so it begins.... (My adventures into Alox!)
Reply #3670 on: April 08, 2016, 11:40:04 PM
That's a nice tool set.

us Offline mrynnr

  • SAK Addict
  • *
  • No Life Club
  • ******
    • Posts: 4,188
Re: And so it begins.... (My adventures into Alox!)
Reply #3671 on: April 09, 2016, 05:23:08 AM
Quote from: Syph007 on March 27, 2016, 07:47:59 PM
I have been building mostly standard models the last week, super tinkers and such so I havent posted all of them.

This one though is pretty far from being standard. :D  One wrench cutout is for metric, the other imperial.

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)
WOW! :drool: :drool: :drool: :ahhh :ahhh :ahhh I think this might be my favorite...
Merit Badges Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo showing the axe in use Must start a thread showing a photo of at least five BO tools Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with a photo showing the Hook in use Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must buy something on EDCSource

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3672 on: April 12, 2016, 07:15:19 PM
Here the results of yesterdays work.  :D  I'm still getting 93mm orders so I shouldnt have any trouble using up the rest of the springs I made for scissors.









PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,285
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #3673 on: April 13, 2016, 01:35:38 AM
Nice ones Syph.

Sent from my SM-G920R4 using Tapatalk

K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Start a new thread with photos of your titanium gear with a multitool or sak Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your birth year SAK Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your EDC watch Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Offline tankerG

  • Newbie
  • *
    • Posts: 23
Re: And so it begins.... (My adventures into Alox!)
Reply #3674 on: April 13, 2016, 02:04:48 AM
Yes, that black alox scale with polished brass liners stands out.

Syph, do you have any "skeletized" concepts in Ti scales cooking? I'd like a Ti-scaled SAK with as much metal removed from the scales that would still be stiff and strong enough for EDC. (Along the lines of those stepped scales you make for fastener removal, but more smooth and graceful). Any ideas on how that would turn out?

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,184
  • Plumbers Know Their Crap!!
Re: And so it begins.... (My adventures into Alox!)
Reply #3675 on: April 13, 2016, 02:40:31 AM
Quote from: Monrogue on April 13, 2016, 01:35:38 AM
Nice ones Syph.

Sent from my SM-G920R4 using Tapatalk
+1 :tu:
JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread demonstrating paracord knot tying Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread showing photos of your outdoor cooking Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

au Offline Rossko07

  • Sr. Member
  • ****
    • Posts: 321
Re: And so it begins.... (My adventures into Alox!)
Reply #3676 on: April 13, 2016, 04:17:35 PM
Seriously. That black alox. Awesome

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3677 on: April 13, 2016, 04:56:43 PM
Quote from: tankerG on April 13, 2016, 02:04:48 AM
Yes, that black alox scale with polished brass liners stands out.

Syph, do you have any "skeletized" concepts in Ti scales cooking? I'd like a Ti-scaled SAK with as much metal removed from the scales that would still be stiff and strong enough for EDC. (Along the lines of those stepped scales you make for fastener removal, but more smooth and graceful). Any ideas on how that would turn out?

Yes I designed some skeletonized scales for that exact reason.  The best way to make a light SAK though is to not have the steel backsprings... But how to have a slipjoint knife without backsprings?  Ive got a few ideas.  :D

My mill is finally scheduled for deliver to my house tomorrow at 9 am :D
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3678 on: April 13, 2016, 05:09:11 PM
A couple people asked for a comparision pic of copper vs brass cross.  So here is a pic.  :D

These are both Ti compacts with phillips and awl on back side.  The hottest 2 layer now, Ive got orders for 6 in the queue.



:D
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3679 on: April 14, 2016, 04:21:38 PM
I've now got 900 lbs for CNC goodness in my garage...

This will take me a few days to get sorted, but Im on the way now at least.  :D



PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

ca Offline Lardlad

  • Jr. Member
  • **
    • Posts: 76
Re: And so it begins.... (My adventures into Alox!)
Reply #3680 on: April 14, 2016, 04:23:44 PM
It's like Christmas morning!  Enjoy the unboxing...

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3681 on: April 14, 2016, 04:28:16 PM
Quote from: Lardlad on April 14, 2016, 04:23:44 PM
It's like Christmas morning!  Enjoy the unboxing...

I was just happy the truck driver was able to park the pallet in my garage otherwise I would have had no way to move it.

Its going in my laudry room so I have to make a work area first, then start the setup.  But at least its finally here!
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline Aloha

  • Global Moderator
  • *
  • Point Of No Return
  • *
    • Posts: 31,235
Re: And so it begins.... (My adventures into Alox!)
Reply #3682 on: April 14, 2016, 04:40:13 PM
We all all witnessing a new era of Syph customs.   :hatsoff:
Esse Quam Videri
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least eight BO tools Start a new thread showing photos of your outdoor cooking Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of camping, including those showing preferred camping equipment Must have a review written in the proper format and posted on the Main Site Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with photos of a Japanese made PST in your collection Start a thread with a photo of at least ten OPT's in your collection Start a thread with photos of at least 5 different Juice models in your collection

us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,805
Re: And so it begins.... (My adventures into Alox!)
Reply #3683 on: April 14, 2016, 04:43:59 PM
I am coming over with a cot and plan to live in your workshop.
Merit Badges Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Participate in a Challenge thread and post a photo  of 84 and 85 mm Swiss Army Knives (and Wengers) for 30 days Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,285
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #3684 on: April 14, 2016, 05:13:11 PM
Quote from: Aloha007 on April 14, 2016, 04:40:13 PM
We all all witnessing a new era of Syph customs.   :hatsoff:
It's very exciting, but my wallet is worried :ahhh

Sent from my SM-G920R4 using Tapatalk

K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Start a new thread with photos of your titanium gear with a multitool or sak Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your birth year SAK Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your EDC watch Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3685 on: April 14, 2016, 06:43:39 PM
Well this will allow me to make some lower cost scales that alot of people ask for as well (G10 press ons).  As well as do more custom work and finally I can engrave with this as it will do 10,000 rpm spindle speed.  My current manual mill is only 2000
« Last Edit: April 14, 2016, 06:46:01 PM by Syph007 »
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,285
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #3686 on: April 14, 2016, 07:54:11 PM
:popcorn:

Sent from my SM-G920R4 using Tapatalk

K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Start a new thread with photos of your titanium gear with a multitool or sak Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your birth year SAK Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your EDC watch Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,184
  • Plumbers Know Their Crap!!
Re: And so it begins.... (My adventures into Alox!)
Reply #3687 on: April 14, 2016, 08:12:42 PM
Quote from: Monrogue on April 14, 2016, 07:54:11 PM
:popcorn:

Sent from my SM-G920R4 using Tapatalk
+1,,
Have fun unboxing,, pictures! This is like another bday gift.. lol
JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread demonstrating paracord knot tying Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread showing photos of your outdoor cooking Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3688 on: April 15, 2016, 08:23:27 PM
I wanted to video the process of getting this bad boy running so I started taking videos.

PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,184
  • Plumbers Know Their Crap!!
Re: And so it begins.... (My adventures into Alox!)
Reply #3689 on: April 15, 2016, 09:08:24 PM
Off to a good start :tu:
JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread demonstrating paracord knot tying Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread showing photos of your outdoor cooking Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

Pages: 1 ... 121 122 123 124 125 ... 201   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
June Goal: $300.00
Due Date: Jun 30
Total Receipts: $81.95
PayPal Fees: $4.26
Net Balance: $77.69
Below Goal: $222.31
Site Currency: USD
26% 
June Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal