Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


damn ebay

ecfiffer · 50 · 3942
« previous next »
Pages: 1 2   Go Down

gb Offline Neil

  • Multitool.org Main Site Manager
  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,287
Re: damn ebay
Reply #30 on: March 04, 2009, 01:26:26 PM
Its arrived and in good condition.  Nothing special about it as far as I can tell.  Sorry to disappoint Dave ;)

It can assist in broken SAK sorting this afternoon.  I'm sure it'll like that  >:D

Neil
I'm not taking any more mod orders at present, sorry.

Offline ecfiffer

  • Hero Member
  • *****
    • Posts: 707
Re: damn ebay
Reply #31 on: March 05, 2009, 04:10:42 AM
well i got my blast in.  not too bad for what i paid.  its a littlw dirty and i have already cleaned it.  what all do you guys use to oil your leathermans?  all the implaments open but feel like the have sone grit between them.  i will have a buddy re-sharpen the main knife blade.  it looks like it was done so already but dont un-evenly.  and good greif the scissors are a joke!  they are way too small for a tool this size.  i really wish they were double.  thats not to say they did not cut well, but still, holy ish batman thats a joke.... here i need to cut this hair i have let me pull out the mini scissors on this full size tool!!!

but i'm still in the dog house.  ehhh oh well, i think a vic or sog will be next >:D >:D
'

no Offline Medic82

  • No Life Club
  • ******
    • Posts: 3,360
  • You will not laugh! You will not cry!
Re: damn ebay
Reply #32 on: March 05, 2009, 07:15:00 AM
Quote from: RaptorMan on February 27, 2009, 01:29:03 PM
every time I get a new one in the mail. I claim I traded it for something  >:D

Me 2, and it works every time. She asked me couple of days ago how many MT I have and I said 3, if you look down you can se my collection. Don't know how loong this will work and think I need to come clean soon.
There is no problem that cannot be solved by the use of high explosives.

gb Offline Neil

  • Multitool.org Main Site Manager
  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,287
Re: damn ebay
Reply #33 on: March 05, 2009, 10:41:08 PM
Quote from: Medic82 on March 05, 2009, 07:15:00 AM
Quote from: RaptorMan on February 27, 2009, 01:29:03 PM
every time I get a new one in the mail. I claim I traded it for something  >:D

Me 2, and it works every time. She asked me couple of days ago how many MT I have and I said 3, if you look down you can se my collection. Don't know how loong this will work and think I need to come clean soon.

I have the advantage that one red SAK looks very similar to every other red SAK   ;)

Neil
I'm not taking any more mod orders at present, sorry.

Offline ecfiffer

  • Hero Member
  • *****
    • Posts: 707
Re: damn ebay
Reply #34 on: March 06, 2009, 01:26:55 AM
here is a shot of the blast with the gerber at work
leatherman-gerber.jpg
* leatherman-gerber.jpg (Filesize: 46.05 KB)
'

england Offline DaveK

  • Zombie Apprentice
  • ********
    • Posts: 13,377
  • Sing, Michael, sing. On the route of the 19 Bus!
Re: damn ebay
Reply #35 on: March 06, 2009, 01:37:08 AM
How are you finding the Blast ecfiffer? Like it / loathe it? Too soon to say?

I used to come here a lot.

england Offline DaveK

  • Zombie Apprentice
  • ********
    • Posts: 13,377
  • Sing, Michael, sing. On the route of the 19 Bus!
Re: damn ebay
Reply #36 on: March 06, 2009, 01:40:18 AM
Quote from: NKB on March 04, 2009, 01:26:26 PM
Its arrived and in good condition.  Nothing special about it as far as I can tell.  Sorry to disappoint Dave ;)

It can assist in broken SAK sorting this afternoon.  I'm sure it'll like that  >:D

Neil

Weeeeellll?

Datecodes? Plier Head? Tell me?

Eh?
I used to come here a lot.

gb Offline Neil

  • Multitool.org Main Site Manager
  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,287
Re: damn ebay
Reply #37 on: March 06, 2009, 02:06:46 AM
Quote from: DaveK on March 06, 2009, 01:40:18 AM
Quote from: NKB on March 04, 2009, 01:26:26 PM
Its arrived and in good condition.  Nothing special about it as far as I can tell.  Sorry to disappoint Dave ;)

It can assist in broken SAK sorting this afternoon.  I'm sure it'll like that  >:D

Neil

Weeeeellll?

Datecodes? Plier Head? Tell me?

(Image removed from quote.) Eh?

1100, 1200 head has Leatherman USA
Leatherman Tool Portland OR on one side and Leatherman Tool Bradford PA on the other.































 >:D  :P

Neil
I'm not taking any more mod orders at present, sorry.

england Offline DaveK

  • Zombie Apprentice
  • ********
    • Posts: 13,377
  • Sing, Michael, sing. On the route of the 19 Bus!
Re: damn ebay
Reply #38 on: March 06, 2009, 02:24:59 AM
Quote from: NKB on March 06, 2009, 02:06:46 AM
...... and Leatherman Tool Bradford PA on the other.


Did you make that bit up?
I used to come here a lot.

Offline ecfiffer

  • Hero Member
  • *****
    • Posts: 707
Re: damn ebay
Reply #39 on: March 06, 2009, 02:27:58 AM
Quote from: DaveK on March 06, 2009, 01:37:08 AM
How are you finding the Blast ecfiffer? Like it / loathe it? Too soon to say?



the only two things that i think are jokes are the saw blade and the scissors. other then that, it seems pretty nice.  i looks and feels really small when you look at it alone but next to the mp600 its close in size.  but it is a little too soon to tell
'

england Offline DaveK

  • Zombie Apprentice
  • ********
    • Posts: 13,377
  • Sing, Michael, sing. On the route of the 19 Bus!
Re: damn ebay
Reply #40 on: March 06, 2009, 02:30:50 AM
I actually like both the saw and the scissors tbh. They work well!

In fact I think the Blast is an underrated tool altogether, especially compared to the Gerber! It would be nice to hear how you rate it as you go along.
I used to come here a lot.

gb Offline Neil

  • Multitool.org Main Site Manager
  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,287
Re: damn ebay
Reply #41 on: March 06, 2009, 02:33:22 AM
Quote from: DaveK on March 06, 2009, 02:24:59 AM
Quote from: NKB on March 06, 2009, 02:06:46 AM
...... and Leatherman Tool Bradford PA on the other.


Did you make that bit up?

Just thought I'd get you excited there for a minute.  Well until you scrolled down  ;)

This is the point where you tell me they really did make parts in Bradford so it wouldn't have been too unusual  ::)  Next time I'll go with Eunostos Mars :D

Neil
I'm not taking any more mod orders at present, sorry.

england Offline DaveK

  • Zombie Apprentice
  • ********
    • Posts: 13,377
  • Sing, Michael, sing. On the route of the 19 Bus!
Re: damn ebay
Reply #42 on: March 06, 2009, 02:40:46 AM
Quote from: NKB on March 06, 2009, 02:33:22 AM
Quote from: DaveK on March 06, 2009, 02:24:59 AM
Quote from: NKB on March 06, 2009, 02:06:46 AM
...... and Leatherman Tool Bradford PA on the other.


Did you make that bit up?

Just thought I'd get you excited there for a minute.  Well until you scrolled down  ;)

This is the point where you tell me they really did make parts in Bradford so it wouldn't have been too unusual  ::)  Next time I'll go with Eunostos Mars :D

Neil

Lol no. Well for what it's worth, you have the design that I like the best for a user in a PST. I'm guessing it still has the "old style" drivers etc, which I find easier to open. Is it nice and tight, and blade in good nick?
I used to come here a lot.

gb Offline Neil

  • Multitool.org Main Site Manager
  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,287
Re: damn ebay
Reply #43 on: March 06, 2009, 03:11:33 AM
Quote from: DaveK on March 06, 2009, 02:40:46 AM
Quote from: NKB on March 06, 2009, 02:33:22 AM
Quote from: DaveK on March 06, 2009, 02:24:59 AM
Quote from: NKB on March 06, 2009, 02:06:46 AM
...... and Leatherman Tool Bradford PA on the other.


Did you make that bit up?

Just thought I'd get you excited there for a minute.  Well until you scrolled down  ;)

This is the point where you tell me they really did make parts in Bradford so it wouldn't have been too unusual  ::)  Next time I'll go with Eunostos Mars :D

Neil

Lol no. Well for what it's worth, you have the design that I like the best for a user in a PST. I'm guessing it still has the "old style" drivers etc, which I find easier to open. Is it nice and tight, and blade in good nick?

I don't really have much in the way to do comparisons, sorry.  It seems pretty loose to me but perfectly usable, blade has obvious use but nothing that being properly sharpened wouldn't sort out.

Neil

I'm not taking any more mod orders at present, sorry.

england Offline DaveK

  • Zombie Apprentice
  • ********
    • Posts: 13,377
  • Sing, Michael, sing. On the route of the 19 Bus!
Re: damn ebay
Reply #44 on: March 06, 2009, 03:26:14 AM
Don't forget you can tighten this one up with the Kick clips too!

Some people seem to prefer some looseness so you can butterfly it open, I prefer them to be real tight so there's no play whilst it's in you pocket.
I used to come here a lot.

gb Offline Neil

  • Multitool.org Main Site Manager
  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,287
Re: damn ebay
Reply #45 on: March 06, 2009, 03:28:44 AM
Quote from: DaveK on March 06, 2009, 03:26:14 AM
Don't forget you can tighten this one up with the Kick clips too!

Some people seem to prefer some looseness so you can butterfly it open, I prefer them to be real tight so there's no play whilst it's in you pocket.

I'm undecided.  My Mini is really loose but it lives in a confined space and I quite like the clicky noise it makes  :-[

Neil
I'm not taking any more mod orders at present, sorry.

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,986
Re: damn ebay
Reply #46 on: March 06, 2009, 03:47:25 AM
Glad you like the Blast ecfiffer :tu: but like Dave I really like the scissor and the saw is very good at it's job :o :D

and Neil glad the PST is in pretty good shape we needs so pics of it as well :pok: ;) :D
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

gb Offline Neil

  • Multitool.org Main Site Manager
  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,287
Re: damn ebay
Reply #47 on: March 06, 2009, 03:55:26 AM
Quote from: Poncho65 on March 06, 2009, 03:47:25 AM
Glad you like the Blast ecfiffer :tu: but like Dave I really like the scissor and the saw is very good at it's job :o :D

and Neil glad the PST is in pretty good shape we needs so pics of it as well :pok: ;) :D



Neil
I'm not taking any more mod orders at present, sorry.

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,986
Re: damn ebay
Reply #48 on: March 06, 2009, 04:02:19 AM
 :drool: I love the PST :ahhh Very nice pic Neil and I love the old plier head on them as well :tu:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

Offline ecfiffer

  • Hero Member
  • *****
    • Posts: 707
Re: damn ebay
Reply #49 on: March 07, 2009, 03:47:29 PM
i guei came off wrong about the saw ans scissors.  i think the saw blade should have been as thick as the knife blade and the scissors, i would feel that they would be a heck of a lot better if they were larger... other then that so far it seems to be a hell a lot better quality then my gerber... not to say ther gerber is bad, but there is something about having all metal locking parts as the gerber lock release is plastic. 
'

Pages: 1 2   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $122.41
PayPal Fees: $6.85
Net Balance: $115.56
Below Goal: $184.44
Site Currency: USD
39% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal