Basic bit driver mod,

[Zed]

I wanted to do one of these a while ago for my sog PT and then after i had sog's pocket tool clip the newer model i thought of a similar idea to the phillips on there plier handle but as a bit driver, so i knocked one up , i had to slightly grind the large flat head on the PT and the handle on the trail , but it works a treat , here are a few pics, 
on the PT

fitted to the trail (tool clip knock off)

[magentus]

 

Nice work.

[Zed]

Nice work.

 
This mod has come up many times on here ,but as there is always lots of new members i thought i would post it up, also not sure if ive seen this added to a pocket clip etc     

[nuphoria]

Clever stuff. I like the shiny tin of goodness that goes with it too

[Zed]

Clever stuff. I like the shiny tin of goodness that goes with it too

cheers chrissy, i have got a altoids tin obsession  ive got 2 in my backpack and another i need to fill but unsure what with at the moment     

[Zed]

And now added this bit driver on the awl for 1/4 bits, it fits like a glove 

[radiotecha1234]

Where did you get that 1/8 adapter to go on the awl?

[trouthunter]

I made one the other week but taking it off the extension for the screw driver.  It was pressed on and it took a little effort but it came off.  I placed it in the bench vise and pounded it off with some washers, a punch and a hammer.

[trouthunter]

I made one the other week but taking it off the extension for the screw driver.  It was pressed on and it took a little effort but it came off.  I placed it in the bench vise and pounded it off with some washers, a punch and a hammer.

http://forum.multitool.org/index.php/topic,29207.msg501100.html#msg501100

[Zed]

yep as siad its the end off a screw driver that fell off  although it slided onto the awl perfectly and pulls off ok,