Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
+-

Hello Lurker! Remove this ad by logging in.


The Victorinox-Wenger Horn Handles thread 18411

No Life Club Posts: 4,618 I'm an Adult?!?! When did that happen?
Re: The Victorinox-Wenger Horn Handles thread
« Reply #30 on: January 01, 2013, 09:11:40 AM »
The horn blanks I ordered arrived. Turns out that the red ones have been dyed, but the dye is only on the surface. As soon as you start sanding it disappears and you are left with brown. (not that that's a bad thing)

I did the Sportsman as a practice run and then the Recruit to go with my "Scales materials" collection.

There is a crack next to the caplifter on the Sportsman. It is fixed with superglue but the line still shows.

Sportsman




Recruit


Absolutely No Life Club Posts: 6,402
Re: The Victorinox-Wenger Horn Handles thread
« Reply #31 on: January 01, 2013, 09:04:46 PM »
Think that Recruit needs to be promoted to Private First Class. :D :tu:
Hero Member Posts: 718
Re: The Victorinox-Wenger Horn Handles thread
« Reply #32 on: January 02, 2013, 12:45:23 AM »
I am a sucker for natural scale material, especially good horn. No SAKs, but I have a GEC Barlow and fixed blade skinner, both with jet black buffalo horn that I adore. The GEC I purchased; the fixed blade I won in a contest six months later, and the scales just happened to match.

Man, would I love to get my hands on one of those Cavaliers.
No Life Club Posts: 4,618 I'm an Adult?!?! When did that happen?
Re: The Victorinox-Wenger Horn Handles thread
« Reply #33 on: January 08, 2013, 07:15:36 AM »
Off-cuts from the above Sportsman and Recruit glued together and used to dress up a Rogue (eBay "throw in" Rover with the addition of scissors from a Beater classic.

I have several Rallys that I plan on turning into Blinged up Ramblers. This one was a practice run.


No Life Club Posts: 4,618 I'm an Adult?!?! When did that happen?
Re: The Victorinox-Wenger Horn Handles thread
« Reply #34 on: January 08, 2013, 11:41:29 AM »
By the time I had got the glued together pieces sanded flat there wasn't enough thickness left to fit T&T in.

But when I'm making scales from stock rather than scrap there will be room for the slots. 

Global Moderator Absolutely No Life Club Posts: 19,999 I may get older but I refuse to grow up.
Re: The Victorinox-Wenger Horn Handles thread
« Reply #35 on: January 08, 2013, 04:40:31 PM »
You're turning into quite a master modder. :tu:
No Life Club Posts: 4,618 I'm an Adult?!?! When did that happen?
Re: The Victorinox-Wenger Horn Handles thread
« Reply #36 on: January 08, 2013, 07:57:50 PM »
You're turning into quite a master modder. :tu:

 :-[  nah, just an enthusiastic hacker.  I'll probably get bored with it all as soon as the next shiny thing comes along. (usually happens)

No Life Club Posts: 4,618 I'm an Adult?!?! When did that happen?
Re: The Victorinox-Wenger Horn Handles thread
« Reply #37 on: January 13, 2013, 12:00:08 PM »
The smurf love-child from an unholy union of a Rally, a Rover and a Classic.

With both the flat and Philips combo tools it has two bottle openers so I'm calling it the "Aussie Mini-Champ".

The cut&pick blade/orange peeler is custom made from one of the left-over nail-files. Unfortunately this means the nail nick is on the wrong side, but I can live with that.

This one has scales from some nice translucent honey-coloured horn and I made them thick enough to fit T&T.







Guess I'm not bored with it yet... :)


Global Moderator Absolutely No Life Club Posts: 19,999 I may get older but I refuse to grow up.
Re: The Victorinox-Wenger Horn Handles thread
« Reply #38 on: January 13, 2013, 01:30:55 PM »
Interesting tool selection. :tu: I prefer this nail file to the SD one.
No Life Club Posts: 4,618 I'm an Adult?!?! When did that happen?
Re: The Victorinox-Wenger Horn Handles thread
« Reply #39 on: January 13, 2013, 02:00:34 PM »
Yes, me too. The SD nail-file is no good at digging gunk from under my nails (ewww).

I even go as far as "sharpening" the gunk remover.  well, squaring up the edges at least.  Just removing the rounded edge resulting from the polishing of the tools makes it far more effective.

No Life Club Posts: 1,544
Re: The Victorinox-Wenger Horn Handles thread
« Reply #40 on: January 13, 2013, 03:25:42 PM »
The smurf love-child from an unholy union of a Rally, a Rover and a Classic.

With both the flat and Philips combo tools it has two bottle openers so I'm calling it the "Aussie Mini-Champ".

(Image removed from quote.)

The Aussie Mini-Champ is just to  :drool: and  :drool: ... and  :drool:

Now I know I need a MiniChamp in translucent horn handles..

 :salute:
No Life Club Posts: 4,534
Re: The Victorinox-Wenger Horn Handles thread
« Reply #41 on: January 13, 2013, 08:37:31 PM »
Off-cuts from the above Sportsman and Recruit glued together and used to dress up a Rogue (eBay "throw in" Rover with the addition of scissors from a Beater classic.

I have several Rallys that I plan on turning into Blinged up Ramblers. This one was a practice run.

(Image removed from quote.)
I love the look of that one, and I prefer it without the T&T.  :drool:
Hero Member Posts: 694 Happiness depends upon ourselves. Aristotle
Re: The Victorinox-Wenger Horn Handles thread
« Reply #42 on: January 14, 2013, 03:34:38 PM »
Off-cuts from the above Sportsman and Recruit glued together and used to dress up a Rogue (eBay "throw in" Rover with the addition of scissors from a Beater classic.

I have several Rallys that I plan on turning into Blinged up Ramblers. This one was a practice run.

(Image removed from quote.)

That's perfect  :drool:  :drool:  :drool:
I love it.  :gimme:

From time to time i sell Old, Rare, Limited Editions Swiss Knives in Ebay: http://www.ebay.com/sch/m...p;_ipg=&_trksid=p3686

My Feedback: http://forum.multitool.or...ex.php/topic,39614.0.html
Hero Member Posts: 694 Happiness depends upon ourselves. Aristotle
Re: The Victorinox-Wenger Horn Handles thread
« Reply #43 on: January 14, 2013, 03:40:37 PM »
The smurf love-child from an unholy union of a Rally, a Rover and a Classic.

With both the flat and Philips combo tools it has two bottle openers so I'm calling it the "Aussie Mini-Champ".

The cut&pick blade/orange peeler is custom made from one of the left-over nail-files. Unfortunately this means the nail nick is on the wrong side, but I can live with that.

This one has scales from some nice translucent honey-coloured horn and I made them thick enough to fit T&T.
(Image removed from quote.)
Guess I'm not bored with it yet... :)

Definitely you have become a master on the horn scales.
Excellent job!  :tu:

From time to time i sell Old, Rare, Limited Editions Swiss Knives in Ebay: http://www.ebay.com/sch/m...p;_ipg=&_trksid=p3686

My Feedback: http://forum.multitool.or...ex.php/topic,39614.0.html
Hero Member Posts: 807 Hecho en México
Re: The Victorinox-Wenger Horn Handles thread
« Reply #44 on: January 14, 2013, 10:13:29 PM »
nice job mate! to avoid lamination in the pin area try to leave the hole in the scale a little bit bigger, ando do not expand a lot the pin on the center, try to make just the exterior of the pin to expand... hope i dont sound confusing   :think:  i really like the rambler

custom swiss army knives
No Life Club Posts: 4,618 I'm an Adult?!?! When did that happen?
Re: The Victorinox-Wenger Horn Handles thread
« Reply #45 on: January 15, 2013, 04:05:00 AM »
Yes, I understand what you are saying, on the Cadet I drilled the holes oversize in the horn and superglued a copper tube bushing in. The pin then expands in the bushing and does not split or de-laminate the horn. I must try and find some tube the right size for these pins.

No Life Club Posts: 4,618 I'm an Adult?!?! When did that happen?
Re: The Victorinox-Wenger Horn Handles thread
« Reply #46 on: January 23, 2013, 05:33:01 AM »
Pulled that Rogue apart and made it into a Rambler. (the dark scales) it's very slim and I made it up without a Keyring.

The other two are in the light horn like the "Aussie-Champ" and are a Rambler and a "Left-Handed Rambler" with the tools in a slightly different configuration.




Sr. Member Posts: 475
Re: The Victorinox-Wenger Horn Handles thread
« Reply #47 on: January 26, 2013, 08:42:49 PM »
Hi guys, I have just received this one, is the first time that I see a horn SAK with the shield and cross on it. Is it common?
Absolutely No Life Club Posts: 6,402
Re: The Victorinox-Wenger Horn Handles thread
« Reply #48 on: January 26, 2013, 10:43:41 PM »
Hi guys, I have just received this one, is the first time that I see a horn SAK with the shield and cross on it. Is it common?

None of mine have it. Definitely uncommon.  :tu:
Sr. Member Posts: 475
Re: The Victorinox-Wenger Horn Handles thread
« Reply #49 on: January 26, 2013, 11:16:52 PM »
Hi guys, I have just received this one, is the first time that I see a horn SAK with the shield and cross on it. Is it common?

None of mine have it. Definitely uncommon.  :tu:

Thank you, Karl!
Hero Member Posts: 694 Happiness depends upon ourselves. Aristotle
Re: The Victorinox-Wenger Horn Handles thread
« Reply #50 on: January 27, 2013, 12:15:53 PM »
Hi guys, I have just received this one, is the first time that I see a horn SAK with the shield and cross on it. Is it common?
That's a rare one, also my first time that i see a horn handle with shield. :o
I wonder where did you find it, Rodrigo?
« Last Edit: January 27, 2013, 12:17:25 PM by MARIOS7319 »

From time to time i sell Old, Rare, Limited Editions Swiss Knives in Ebay: http://www.ebay.com/sch/m...p;_ipg=&_trksid=p3686

My Feedback: http://forum.multitool.or...ex.php/topic,39614.0.html
Sr. Member Posts: 475
Re: The Victorinox-Wenger Horn Handles thread
« Reply #51 on: January 27, 2013, 02:08:14 PM »
Hi guys, I have just received this one, is the first time that I see a horn SAK with the shield and cross on it. Is it common?
That's a rare one, also my first time that i see a horn handle with shield. :o
I wonder where did you find it, Rodrigo?
Hi Marios! I think you guys saw a seller in ebay with a few sales, but with 100% rating, and selling very interesting SAKs (horn, mother of pearl, rosewood, etc...)his name is royaltyknives, I could get this from him, his name is Matt and is a really nice guy, the only problem is that he did not ship to Brazil, so I have to ask to a friend of mine receive in US, and just received them last Friday.

Hero Member Posts: 694 Happiness depends upon ourselves. Aristotle
Re: The Victorinox-Wenger Horn Handles thread
« Reply #52 on: January 27, 2013, 09:03:16 PM »
Hi guys, I have just received this one, is the first time that I see a horn SAK with the shield and cross on it. Is it common?
That's a rare one, also my first time that i see a horn handle with shield. :o
I wonder where did you find it, Rodrigo?
Hi Marios! I think you guys saw a seller in ebay with a few sales, but with 100% rating, and selling very interesting SAKs (horn, mother of pearl, rosewood, etc...)his name is royaltyknives, I could get this from him, his name is Matt and is a really nice guy, the only problem is that he did not ship to Brazil, so I have to ask to a friend of mine receive in US, and just received them last Friday.

Thanks for the info, yes i have seen him in the past, he sells very nice SAKs.
By the way, soon i will start to sell in ebay, you may have to keep an eye on my blog for more info, because some SAK's will start in low price. ;)

From time to time i sell Old, Rare, Limited Editions Swiss Knives in Ebay: http://www.ebay.com/sch/m...p;_ipg=&_trksid=p3686

My Feedback: http://forum.multitool.or...ex.php/topic,39614.0.html
Sr. Member Posts: 475
Re: The Victorinox-Wenger Horn Handles thread
« Reply #53 on: January 27, 2013, 10:55:12 PM »
Hi guys, I have just received this one, is the first time that I see a horn SAK with the shield and cross on it. Is it common?
That's a rare one, also my first time that i see a horn handle with shield. :o
I wonder where did you find it, Rodrigo?
Hi Marios! I think you guys saw a seller in ebay with a few sales, but with 100% rating, and selling very interesting SAKs (horn, mother of pearl, rosewood, etc...)his name is royaltyknives, I could get this from him, his name is Matt and is a really nice guy, the only problem is that he did not ship to Brazil, so I have to ask to a friend of mine receive in US, and just received them last Friday.

Thanks for the info, yes i have seen him in the past, he sells very nice SAKs.
By the way, soon i will start to sell in ebay, you may have to keep an eye on my blog for more info, because some SAK's will start in low price. ;)

What is your user name in ebay, Ill monitor it! 
Hero Member Posts: 694 Happiness depends upon ourselves. Aristotle
Re: The Victorinox-Wenger Horn Handles thread
« Reply #54 on: January 28, 2013, 01:29:19 PM »
My user name is marios7319marios, and soon i will start selling.
And if it goes well, i will have the oportunity to buy some nice stuff for donations prizes for MultiTool.org.
A friend of mine is working for Victorinox in Greece and i have "access" to the warehouse, so sometimes you will never know what you can find.
I have a lot of ideas for the future, will see how it will go. ;)

Now let's go  :b2t:
« Last Edit: January 28, 2013, 02:20:02 PM by MARIOS7319 »

From time to time i sell Old, Rare, Limited Editions Swiss Knives in Ebay: http://www.ebay.com/sch/m...p;_ipg=&_trksid=p3686

My Feedback: http://forum.multitool.or...ex.php/topic,39614.0.html
Absolutely No Life Club Posts: 5,431 \o/
Re: The Victorinox-Wenger Horn Handles thread
« Reply #55 on: February 07, 2013, 01:41:33 PM »
Hi guys, I have just received this one, is the first time that I see a horn SAK with the shield and cross on it. Is it common?

None of mine have it. Definitely uncommon.  :tu:

Here's a 74mm horn scaled SAK with shield & cross. Very nice!

http://www.ebay.com/itm/221184785649
No Life Club Posts: 2,570
Re: The Victorinox-Wenger Horn Handles thread
« Reply #56 on: February 07, 2013, 02:07:53 PM »
A friend of mine is working for Victorinox in Greece and i have "access" to the warehouse,

Hey Marios

Don't suppose this  friend of yours can locate me a SwissFlame   :pok: :pok:  ;)

Tosh  :tu:
(BTW I owe you some pic's - on their way my good man)

I don't claim to know it all, but what I do know is right.
Absolutely No Life Club Posts: 5,431 \o/
Re: The Victorinox-Wenger Horn Handles thread
« Reply #57 on: February 07, 2013, 02:12:33 PM »
There's a CampFlame for €100 on eBay right now :)
No Life Club Posts: 2,570
Re: The Victorinox-Wenger Horn Handles thread
« Reply #58 on: February 07, 2013, 03:53:09 PM »
There's a CampFlame for €100 on eBay right now :)

Hi Reinier

I got the CampFlame along with it's bigger sibling the XXLT, hence my  N E E D  for the SwissFlame.  :facepalm:

I don't claim to know it all, but what I do know is right.
Absolutely No Life Club Posts: 5,431 \o/
Re: The Victorinox-Wenger Horn Handles thread
« Reply #59 on: February 07, 2013, 04:18:04 PM »
I see. I will look around for one for you. I have already bought and sold several SwissFlames and CampFlames so maybe I will find one for you :)

 

Operational Funds

Keep the Unworkable working! Donate with PayPal!
July Goal: $275.00
Due Date: Jul 31
Total Receipts: $415.00
PayPal Fees: $24.27
Net Balance: $390.73
Above Goal: $115.73
Site Currency: USD
142% 
July Donations

Community Links

Powered by EzPortal
© 2017 Defender Web & Tool