Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


My two Swisstools have arrived

Top-Gear-24 · 52 · 4394
« previous next »
Pages: 1 2   Go Down

gr Offline MARIOS7319

  • Hero Member
  • *****
    • Posts: 694
  • Happiness depends upon ourselves. Aristotle
Re: My two Swisstools have arrived
Reply #30 on: November 27, 2013, 10:28:09 PM
Quote from: Top-Gear-24 on November 23, 2013, 10:42:36 PM
Just noticed that there's no Vic shield on the plier-head anymore, leaving away the red paint is a good thing in my opinion, both old and new logo are ok for me, but I did like the shield on the plier-head ...

I also like the shield on the plier-head, as for the red logo it's better because in mine Swisstool after 3 years it almost  gone.

ca Offline derekmac

  • *
  • Zombie Apprentice
  • ********
    • Posts: 16,702
  • Little to the right...
Re: My two Swisstools have arrived
Reply #31 on: November 28, 2013, 05:24:01 PM
Quote from: Top-Gear-24 on November 27, 2013, 07:49:07 PM
Quote from: Monrogue on November 27, 2013, 06:39:41 PM
... Aw, I thought you were gonna say you'd wrap it up and send it to me :(  Oh well, maybe some other time :pok:   :rofl:
I told him that if he put a Swisstool in a sheath on his belt, his pants would drop to the floor in no time, but that didn't seem to bother him ...  ::)
:rofl:  My son can't wait to start getting MT's and knives!  He's 6 now, so I want to wait a wee bit longer before I give him something really good.  I have a small orange Buck Knife that he can't wait to get his hands on, and he also wants an orange Juice S2.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Must start new thread with photos of multitools (Magazine/Catalogue type photos) For those who posted like a boss. Start a new thread demonstrating paracord knot tying Start a new thread and post a picture of fire making kit or fire with a multitool Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least three BO tools

be Offline Top-Gear-24

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,765
Re: My two Swisstools have arrived
Reply #32 on: December 01, 2013, 05:25:07 PM
Since the sun came out today, I took the opportunity to take some new pics  8).










Merit Badges Must start a thread with a photo of your birth year SAK Must buy something on EDCSource Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your stayglow SAK You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with photos of at least 8 different 130mm models in your collection Start a new thread with photos of your Mora knives in use Start a new thread with photos of your titanium gear with a multitool or sak Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a thread with a photo of a repair you made with duct tape Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least five BO tools Must put something in order and provide link to the post.

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,284
  • Wooooo!
Re: My two Swisstools have arrived
Reply #33 on: December 02, 2013, 02:59:24 AM
Nice pics man :tu:
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Start a new thread with photos of your titanium gear with a multitool or sak Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your EDC watch Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

ca Offline CanadianLMfan

  • No Life Club
  • ******
    • Posts: 3,334
  • All Lurkers Please Join :D
Re: My two Swisstools have arrived
Reply #34 on: December 02, 2013, 03:00:30 AM
But the angles are all so similar.
Leatherman

ca Offline derekmac

  • *
  • Zombie Apprentice
  • ********
    • Posts: 16,702
  • Little to the right...
Re: My two Swisstools have arrived
Reply #35 on: December 02, 2013, 03:26:07 AM

Quote from: CanadianLMfan on December 02, 2013, 03:00:30 AM
But the angles are all so similar.
They might be similar, but they are very different.

Nice pics!!!


Sent from my iPhone 5 using Tapatalk
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Must start new thread with photos of multitools (Magazine/Catalogue type photos) For those who posted like a boss. Start a new thread demonstrating paracord knot tying Start a new thread and post a picture of fire making kit or fire with a multitool Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least three BO tools

be Offline Top-Gear-24

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,765
Re: My two Swisstools have arrived
Reply #36 on: December 02, 2013, 04:18:55 PM
Quote from: CanadianLMfan on December 02, 2013, 03:00:30 AM
But the angles are all so similar.

Well, since it's almost winter the sun is quite low, and when I take another angle than the one on these pics I'm always blocking the sun, so the tool sits in my own shadow. I also like to use other angles and create some variety, but sometimes you have to work with what you've got ...  ;).

By the way, I've tried other angles, but none of those pics were as good as the ones I posted, in my opinion  8).
Merit Badges Must start a thread with a photo of your birth year SAK Must buy something on EDCSource Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your stayglow SAK You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with photos of at least 8 different 130mm models in your collection Start a new thread with photos of your Mora knives in use Start a new thread with photos of your titanium gear with a multitool or sak Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a thread with a photo of a repair you made with duct tape Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least five BO tools Must put something in order and provide link to the post.

us Offline AdmSlc

  • *
  • Hero Member
  • *****
    • Posts: 776
  • adm.slc@icloud.com
Re: My two Swisstools have arrived
Reply #37 on: December 02, 2013, 06:52:05 PM
What model of Swisstool are those?


-AdmSlc
Merit Badges Start a new thread and post a photo of a flashlight as part of your EDC

be Offline Top-Gear-24

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,765
Re: My two Swisstools have arrived
Reply #38 on: December 02, 2013, 07:11:19 PM
Quote from: AdmSlc on December 02, 2013, 06:52:05 PM
What model of Swisstool are those?


-AdmSlc

All of these are the Swisstool X (the one with the scissors), in my opinion the must useful version  ;).
Merit Badges Must start a thread with a photo of your birth year SAK Must buy something on EDCSource Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your stayglow SAK You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with photos of at least 8 different 130mm models in your collection Start a new thread with photos of your Mora knives in use Start a new thread with photos of your titanium gear with a multitool or sak Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a thread with a photo of a repair you made with duct tape Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least five BO tools Must put something in order and provide link to the post.

be Offline Top-Gear-24

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,765
Re: My two Swisstools have arrived
Reply #39 on: December 15, 2013, 12:35:39 AM
How shiny can a tool be ...




Merit Badges Must start a thread with a photo of your birth year SAK Must buy something on EDCSource Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your stayglow SAK You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with photos of at least 8 different 130mm models in your collection Start a new thread with photos of your Mora knives in use Start a new thread with photos of your titanium gear with a multitool or sak Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a thread with a photo of a repair you made with duct tape Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least five BO tools Must put something in order and provide link to the post.

ca Offline derekmac

  • *
  • Zombie Apprentice
  • ********
    • Posts: 16,702
  • Little to the right...
Re: My two Swisstools have arrived
Reply #40 on: December 15, 2013, 01:34:26 AM

Quote from: Top-Gear-24 on December 15, 2013, 12:35:39 AM
How shiny can a tool be ...



Holy crap!!!  Now THAT'S shiny!!!!


Sent from my iPad using Tapatalk
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Must start new thread with photos of multitools (Magazine/Catalogue type photos) For those who posted like a boss. Start a new thread demonstrating paracord knot tying Start a new thread and post a picture of fire making kit or fire with a multitool Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least three BO tools

be Offline jeroen.thys.37

  • Full Member
  • ***
    • Posts: 100
Re: My two Swisstools have arrived
Reply #41 on: December 15, 2013, 01:35:37 AM
Quote from: Top-Gear-24 on December 15, 2013, 12:35:39 AM
How shiny can a tool be ...




Beautiful!!!  :salute:

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,284
  • Wooooo!
Re: My two Swisstools have arrived
Reply #42 on: December 15, 2013, 05:01:08 AM
Dude, that's a freakin' sweet pic :tu:
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Start a new thread with photos of your titanium gear with a multitool or sak Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your EDC watch Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

de Offline Schneider

  • Full Member
  • ***
    • Posts: 115
Re: My two Swisstools have arrived
Reply #43 on: December 15, 2013, 05:54:23 PM
Yes, very nice reflection. You should send it to Vics Facebook. :D

gr Offline firiki

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 6,076
  • Cats have pocket knives of their own
Re: My two Swisstools have arrived
Reply #44 on: December 16, 2013, 01:59:50 PM
8) I need sunglasses ! Impressive how shiny the Swisstools can be. I can even see the measurements reflecting.  8)
Omnia vincit amor. Vae victis.

us Offline AdmSlc

  • *
  • Hero Member
  • *****
    • Posts: 776
  • adm.slc@icloud.com
Re: My two Swisstools have arrived
Reply #45 on: January 02, 2014, 05:26:28 PM

Quote from: Top-Gear-24 on December 02, 2013, 07:11:19 PM
Quote from: AdmSlc on December 02, 2013, 06:52:05 PM
What model of Swisstool are those?


-AdmSlc

All of these are the Swisstool X (the one with the scissors), in my opinion the must useful version  ;).
Nice. I just ordered my first Swisstool and I went with the X model. I couldn't pass up the $49 price. I can't wait for it to get here!! :drool


-AdmSlc
Merit Badges Start a new thread and post a photo of a flashlight as part of your EDC

be Offline Top-Gear-24

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,765
Re: My two Swisstools have arrived
Reply #46 on: January 02, 2014, 05:50:24 PM
Quote from: AdmSlc on January 02, 2014, 05:26:28 PM

Quote from: Top-Gear-24 on December 02, 2013, 07:11:19 PM
Quote from: AdmSlc on December 02, 2013, 06:52:05 PM
What model of Swisstool are those?


-AdmSlc

All of these are the Swisstool X (the one with the scissors), in my opinion the must useful version  ;).
Nice. I just ordered my first Swisstool and I went with the X model. I couldn't pass up the $49 price. I can't wait for it to get here!! :drool


-AdmSlc

Great choice mate  :tu:, and $49 is a steal for a tool like the Swisstool  :o..

I hope you're going to like it as much as I like mine  ;).
Merit Badges Must start a thread with a photo of your birth year SAK Must buy something on EDCSource Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your stayglow SAK You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with photos of at least 8 different 130mm models in your collection Start a new thread with photos of your Mora knives in use Start a new thread with photos of your titanium gear with a multitool or sak Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a thread with a photo of a repair you made with duct tape Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least five BO tools Must put something in order and provide link to the post.

nl Offline bmot

  • No Life Club
  • ******
    • Posts: 4,468
  • Don't judge a tool by it's brand
Re: My two Swisstools have arrived
Reply #47 on: January 02, 2014, 05:55:39 PM
Quote from: Top-Gear-24 on January 02, 2014, 05:50:24 PM
Quote from: AdmSlc on January 02, 2014, 05:26:28 PM

Quote from: Top-Gear-24 on December 02, 2013, 07:11:19 PM
Quote from: AdmSlc on December 02, 2013, 06:52:05 PM
What model of Swisstool are those?


-AdmSlc

All of these are the Swisstool X (the one with the scissors), in my opinion the must useful version  ;) .
Nice. I just ordered my first Swisstool and I went with the X model. I couldn't pass up the $49 price. I can't wait for it to get here!! :drool


-AdmSlc

Great choice mate  :tu: , and $49 is a steal for a tool like the Swisstool  :o ..

I hope you're going to like it as much as I like mine  ;) .


So, is your next Swisstool there yet?  :pok: :pok:
A knife-carrying guide for the international traveller. : http://forum.multitool.org/index.php/topic,47532.0.html
Merit Badges Must buy something on EDCSource Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC

us Offline AdmSlc

  • *
  • Hero Member
  • *****
    • Posts: 776
  • adm.slc@icloud.com
Re: My two Swisstools have arrived
Reply #48 on: January 02, 2014, 05:57:05 PM

Quote from: bmot on January 02, 2014, 05:55:39 PM
Quote from: Top-Gear-24 on January 02, 2014, 05:50:24 PM
Quote from: AdmSlc on January 02, 2014, 05:26:28 PM

Quote from: Top-Gear-24 on December 02, 2013, 07:11:19 PM
Quote from: AdmSlc on December 02, 2013, 06:52:05 PM
What model of Swisstool are those?


-AdmSlc

All of these are the Swisstool X (the one with the scissors), in my opinion the must useful version  ;) .
Nice. I just ordered my first Swisstool and I went with the X model. I couldn't pass up the $49 price. I can't wait for it to get here!! :drool


-AdmSlc

Great choice mate  :tu: , and $49 is a steal for a tool like the Swisstool  :o ..

I hope you're going to like it as much as I like mine  ;) .


So, is your next Swisstool there yet?  :pok: :pok:

I wish. I'm assuming either Monday or Tuesday it will be here. I'll be sure to post pictures.


-AdmSlc
Merit Badges Start a new thread and post a photo of a flashlight as part of your EDC

be Offline Top-Gear-24

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,765
Re: My two Swisstools have arrived
Reply #49 on: January 02, 2014, 06:05:44 PM
Quote from: AdmSlc on January 02, 2014, 05:57:05 PM

Quote from: bmot on January 02, 2014, 05:55:39 PM
Quote from: Top-Gear-24 on January 02, 2014, 05:50:24 PM
Quote from: AdmSlc on January 02, 2014, 05:26:28 PM

Quote from: Top-Gear-24 on December 02, 2013, 07:11:19 PM
Quote from: AdmSlc on December 02, 2013, 06:52:05 PM
What model of Swisstool are those?


-AdmSlc

All of these are the Swisstool X (the one with the scissors), in my opinion the must useful version  ;) .
Nice. I just ordered my first Swisstool and I went with the X model. I couldn't pass up the $49 price. I can't wait for it to get here!! :drool


-AdmSlc

Great choice mate  :tu: , and $49 is a steal for a tool like the Swisstool  :o ..

I hope you're going to like it as much as I like mine  ;) .


So, is your next Swisstool there yet?  :pok: :pok:

I wish. I'm assuming either Monday or Tuesday it will be here. I'll be sure to post pictures.


-AdmSlc

I believe bmot was talking to me  ;).

And yes, It arrived on tuesday, but I had to work the last few days so yesterday evening was the first time I could actually have a close look at it and give it some attention  ;).

I cleaned/oiled/polished it and I hope the weather gets a bit better the next days so I can take some nice pics of it, when I do, I'll post them right away  :salute:.

Once again, big thank you for your generosity my friend  :hatsoff:.
Merit Badges Must start a thread with a photo of your birth year SAK Must buy something on EDCSource Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your stayglow SAK You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with photos of at least 8 different 130mm models in your collection Start a new thread with photos of your Mora knives in use Start a new thread with photos of your titanium gear with a multitool or sak Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a thread with a photo of a repair you made with duct tape Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least five BO tools Must put something in order and provide link to the post.

nl Offline bmot

  • No Life Club
  • ******
    • Posts: 4,468
  • Don't judge a tool by it's brand
Re: My two Swisstools have arrived
Reply #50 on: January 02, 2014, 06:16:59 PM
Quote from: Top-Gear-24 on January 02, 2014, 06:05:44 PM
Quote from: AdmSlc on January 02, 2014, 05:57:05 PM

Quote from: bmot on January 02, 2014, 05:55:39 PM
Quote from: Top-Gear-24 on January 02, 2014, 05:50:24 PM
Quote from: AdmSlc on January 02, 2014, 05:26:28 PM

Quote from: Top-Gear-24 on December 02, 2013, 07:11:19 PM
Quote from: AdmSlc on December 02, 2013, 06:52:05 PM
What model of Swisstool are those?


-AdmSlc

All of these are the Swisstool X (the one with the scissors), in my opinion the must useful version  ;) .
Nice. I just ordered my first Swisstool and I went with the X model. I couldn't pass up the $49 price. I can't wait for it to get here!! :drool


-AdmSlc

Great choice mate  :tu: , and $49 is a steal for a tool like the Swisstool  :o ..

I hope you're going to like it as much as I like mine  ;) .


So, is your next Swisstool there yet?  :pok: :pok:

I wish. I'm assuming either Monday or Tuesday it will be here. I'll be sure to post pictures.


-AdmSlc

I believe bmot was talking to me  ;) .

And yes, It arrived on tuesday, but I had to work the last few days so yesterday evening was the first time I could actually have a close look at it and give it some attention  ;) .

I cleaned/oiled/polished it and I hope the weather gets a bit better the next days so I can take some nice pics of it, when I do, I'll post them right away  :salute: .

Once again, big thank you for your generosity my friend  :hatsoff: .


Ah, that's quick :)


I'm eagerly awaiting :)
A knife-carrying guide for the international traveller. : http://forum.multitool.org/index.php/topic,47532.0.html
Merit Badges Must buy something on EDCSource Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC

gb Offline J888www

  • Newbie
  • *
    • Posts: 14
Re: My two Swisstools have arrived
Reply #51 on: January 02, 2014, 06:36:17 PM
Saw the price a few days ago and I just couldn't purchase fast enough. In my haste, I forgot to apply the 10% further discount Coupon Code, else it would have been even cheaper.

I have plans to apply a coat of CQuartz UK on the outer surface of this SwissTool; not only does it provide protection from scratches, it also add a little more adhesion to the grip of the metal making it less slippery.

Now just waiting in anticipation for its arrival.

Pages: 1 2   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $152.99
PayPal Fees: $8.68
Net Balance: $144.31
Below Goal: $155.69
Site Currency: USD
48% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal