What did you just get?

[MadPlumbarian]

Oh yeah, and my unique shirts should be in today, should even be in the mailbox now,,  oh adrboy, time to get up..
JR

Unique shirts?

I like v-neck because they don't press up on my throat, and yet I like pocket t's because I always have my sunglasses on me, so I pretty much wear polos because it's kinda both.. anyway I found some place that actually make v-neck pocket t's.. and for only like $6 so I ordered a bunch of colors, you would think it's just a simple v-neck, how hard is it to find with a pocket? Well, HARD! I found them once before, and they were part of some tv show, called dirty jobs, very nice shirt but kinda short, so I really showed my plumbing skills every time I bent over on top of that they were expensive. So I'm hoping these aren't as short.. but still a v-neck pocket t!
JR

[Mechanickal]

Oh yeah, and my unique shirts should be in today, should even be in the mailbox now,,  oh adrboy, time to get up..
JR

Unique shirts?

I like v-neck because they don't press up on my throat, and yet I like pocket t's because I always have my sunglasses on me, so I pretty much wear polos because it's kinda both.. anyway I found some place that actually make v-neck pocket t's.. and for only like $6 so I ordered a bunch of colors, you would think it's just a simple v-neck, how hard is it to find with a pocket? Well, HARD! I found them once before, and they were part of some tv show, called dirty jobs, very nice shirt but kinda short, so I really showed my plumbing skills every time I bent over on top of that they were expensive. So I'm hoping these aren't as short.. but still a v-neck pocket t!
JR

So you're a plumber wearing a "dirty jobs" shirt...?

[AimlessWanderer]

I got an awesome gift in the post from Smashie today! 

Details in the Tea thread 

[MadPlumbarian]

Oh yeah, and my unique shirts should be in today, should even be in the mailbox now,,  oh adrboy, time to get up..
JR

Unique shirts?

I like v-neck because they don't press up on my throat, and yet I like pocket t's because I always have my sunglasses on me, so I pretty much wear polos because it's kinda both.. anyway I found some place that actually make v-neck pocket t's.. and for only like $6 so I ordered a bunch of colors, you would think it's just a simple v-neck, how hard is it to find with a pocket? Well, HARD! I found them once before, and they were part of some tv show, called dirty jobs, very nice shirt but kinda short, so I really showed my plumbing skills every time I bent over on top of that they were expensive. So I'm hoping these aren't as short.. but still a v-neck pocket t!
JR

So you're a plumber wearing a "dirty jobs" shirt...?

Lol, yeah..
The little guy went out and got the package, and yet they sent the wrong ones, I got crew neck, go fig..
But I did a little project, since I had other shirts that were like new but no pockets I took four, cut and made pockets out of the older ones and put them on the like new ones, so I guess I can say I have two ne shirts?
JR

[jaya_man]

No.8 with sheath and a Solo Plus in NOS...




Sent from my iPhone using Tapatalk

[Sparky415]

A little cree led arrived today for my newly aquired 2D Maglight, seem to work well 

[zr0dfx]

A little cree led arrived today for my newly aquired 2D Maglight, seem to work well 

Does that Cree led come as a bulb you just screw in? Amazing 

[Sparky415]

Yes Zox 
13quid from Amazon
Shout if you need a link 

[zr0dfx]

Yes Zox 
13quid from Amazon
Shout if you need a link 

I've found them on eBay 
Very cool upgrade for a trusty old mag light.
 
 

[Douglas]

Thanks to Mr. Hauser here at    for a great little modded Spirit.

[jaya_man]

Solo 108mm




Sent from my iPhone using Tapatalk

[Yadda]

A Crosman Bushmaster pellet gun and pellets, two large framing squares, a small Stanley brass and rosewood triangle square, a drill brace, a 6 foot tape measure, a pair of tailor's scissors, a 4 pond cross pein hammer, a Brinkmann 4 D-cell Flashlight and a Disston keyhole saw.  From an estate sale for the princely sum of $20 U.S.

[MusicMen]

A Crosman Bushmaster pellet gun and pellets, two large framing squares, a small Stanley brass and rosewood triangle square, a drill brace, a 6 foot tape measure, a pair of tailor's scissors, a 4 pond cross pein hammer, a Brinkmann 4 D-cell Flashlight and a Disston keyhole saw.  From an estate sale for the princely sum of $20 U.S.

Nice haul!   

[Yadda]

Nice haul!   

Thanks!

[gregozedobe]

A good mix of stuff there Yadda, and for an excellent price too - bonus !


I've just received large box of MT goodness from the US (thanks Matt ! ).

Some of the less common MTs were:

A couple of early Bear Jaws MTs, one with screwed plier pivot (labelled Toolzall Pro by Crescent)
Red & black SOG Micro ToolClips (original SEKI - Japan version),
Early Gerber Mr Pinchy FPR v1.0
Gerber MP600 FPR Needle Nose pliers, black locking tabs
Gerber MP600 tan, "Operation Iraqi Freedom"
Snap-On SMT97R ( a red Gerber MP600)
Stanley Clock/pliers (crazy bloody thing !)
A couple of Multitasker MTs (S2 & S3)
Meyerco Paradox (funny skinny pliers, but a massive knife blade)
A couple of Harley-Davidson Mototools HD29 & HD30 (by SOG)
A Paladin PT-510 (also by SOG)
Gerber Keystyle keychain MT in a very pretty metallic blue
A couple of Craftsman 4571 MTs with heavy duty slip-joint pliers (relabelled Schrade ST5)
Bucktool 360 Clip
An old PST (v2)
Old german Fishing MT "Hoffritz" on knife tang)
A couple of the original West Marine Blacktips by SOG - with replaceable carbide wire cutters
  (these are quite rare, they were all recalled very soon after release because the pliers were prone to breaking).

I thought I was slowing down on my collecting - perhaps that thought was suffering from a slight "terminological inexactitude"       

[ReamerPunch]

A good mix of stuff there Yadda, and for an excellent price too - bonus !


I've just received large box of MT goodness from the US (thanks Matt ! ).

Some of the less common MTs were:

A couple of early Bear Jaws MTs, one with screwed plier pivot (labelled Toolzall Pro by Crescent)
Red & black SOG Micro ToolClips (original SEKI - Japan version),
Early Gerber Mr Pinchy FPR v1.0
Gerber MP600 FPR Needle Nose pliers, black locking tabs
Gerber MP600 tan, "Operation Iraqi Freedom"
Snap-On SMT97R ( a red Gerber MP600)
Stanley Clock/pliers (crazy bloody thing !)
A couple of Multitasker MTs (S2 & S3)
Meyerco Paradox (funny skinny pliers, but a massive knife blade)
A couple of Harley-Davidson Mototools HD29 & HD30 (by SOG)
A Paladin PT-510 (also by SOG)
Gerber Keystyle keychain MT in a very pretty metallic blue
A couple of Craftsman 4571 MTs with heavy duty slip-joint pliers (relabelled Schrade ST5)
Bucktool 360 Clip
An old PST (v2)
Old german Fishing MT "Hoffritz" on knife tang)
A couple of the original West Marine Blacktips by SOG - with replaceable carbide wire cutters
  (these are quite rare, they were all recalled very soon after release because the pliers were prone to breaking).

I thought I was slowing down on my collecting - perhaps that thought was suffering from a slight "terminological inexactitude"       

Nice haul.

Any pics of the extra room you had to build for those? 

[SteveC]

Camillus 51 Barlow

[eamo]

spyderco saver salt -

[Yadda]

A good mix of stuff there Yadda, and for an excellent price too - bonus !


I've just received large box of MT goodness from the US (thanks Matt ! ).

Some of the less common MTs were:

A couple of early Bear Jaws MTs, one with screwed plier pivot (labelled Toolzall Pro by Crescent)
Red & black SOG Micro ToolClips (original SEKI - Japan version),
Early Gerber Mr Pinchy FPR v1.0
Gerber MP600 FPR Needle Nose pliers, black locking tabs
Gerber MP600 tan, "Operation Iraqi Freedom"
Snap-On SMT97R ( a red Gerber MP600)
Stanley Clock/pliers (crazy bloody thing !)
A couple of Multitasker MTs (S2 & S3)
Meyerco Paradox (funny skinny pliers, but a massive knife blade)
A couple of Harley-Davidson Mototools HD29 & HD30 (by SOG)
A Paladin PT-510 (also by SOG)
Gerber Keystyle keychain MT in a very pretty metallic blue
A couple of Craftsman 4571 MTs with heavy duty slip-joint pliers (relabelled Schrade ST5)
Bucktool 360 Clip
An old PST (v2)
Old german Fishing MT "Hoffritz" on knife tang)
A couple of the original West Marine Blacktips by SOG - with replaceable carbide wire cutters
  (these are quite rare, they were all recalled very soon after release because the pliers were prone to breaking).

I thought I was slowing down on my collecting - perhaps that thought was suffering from a slight "terminological inexactitude"       

If this is slowing down, I'm backing up!   Very nice additions to an already fantastic collection.
I wish your multi tool fairy would visit me. 


...and finally Welcome to the Stanley Clock/Pliers club!  What took you so long? 

[MusicMen]

A good mix of stuff there Yadda, and for an excellent price too - bonus !


I've just received large box of MT goodness from the US (thanks Matt ! ).

Some of the less common MTs were:

A couple of early Bear Jaws MTs, one with screwed plier pivot (labelled Toolzall Pro by Crescent)
Red & black SOG Micro ToolClips (original SEKI - Japan version),
Early Gerber Mr Pinchy FPR v1.0
Gerber MP600 FPR Needle Nose pliers, black locking tabs
Gerber MP600 tan, "Operation Iraqi Freedom"
Snap-On SMT97R ( a red Gerber MP600)
Stanley Clock/pliers (crazy bloody thing !)
A couple of Multitasker MTs (S2 & S3)
Meyerco Paradox (funny skinny pliers, but a massive knife blade)
A couple of Harley-Davidson Mototools HD29 & HD30 (by SOG)
A Paladin PT-510 (also by SOG)
Gerber Keystyle keychain MT in a very pretty metallic blue
A couple of Craftsman 4571 MTs with heavy duty slip-joint pliers (relabelled Schrade ST5)
Bucktool 360 Clip
An old PST (v2)
Old german Fishing MT "Hoffritz" on knife tang)
A couple of the original West Marine Blacktips by SOG - with replaceable carbide wire cutters
  (these are quite rare, they were all recalled very soon after release because the pliers were prone to breaking).

I thought I was slowing down on my collecting - perhaps that thought was suffering from a slight "terminological inexactitude"       

If you ever want to get rid of the red SOG Micro ToolClip, let me know.      

[gregozedobe]

If this is slowing down, I'm backing up!   Very nice additions to an already fantastic collection.
I wish your multi tool fairy would visit me. 

No multitool fairy here, just spending way too much time and $$$ on ebay 

...and finally Welcome to the Stanley Clock/Pliers club!  What took you so long? 

I've been a member of the Stanley Clock/Pliers club for years (maybe even an MTo founding member). I think this one is # 8 in my collection 

And the Stanley Clock/Pliers isn't even the weirdest Stanley Clock/Tool I have - there is this bizarre clock/driver that looks like a floating mine from WW2.  I think the designers of these promo watch/tools must have been smoking some seriously strong weed during their design sessions, they came up with some way-out wacky ideas (watches with an expanding ruler or another one with c-clamp for example !  )   

[gregozedobe]

If you ever want to get rid of the red SOG Micro ToolClip, let me know.      

Trouble is it isn't in great shape (dirty, and the usual broken clip for the plier handle), and postage from Oz to the US is very expensive 

[MusicMen]

If you ever want to get rid of the red SOG Micro ToolClip, let me know.      

Trouble is it isn't in great shape (dirty, and the usual broken clip for the plier handle), and postage from Oz to the US is very expensive 

Well, if you should find one in better shape, let me know. It is one red tool I would like to complete my red MT collection. Shipping no problem for one that is collectable.

[Sparky415]

As my last drop in worked so well I went ahead and bought another one for my second maglight, 
the original seller had sold out so I ordered from somewhere else, unfortunately I didn't read the description well enough,
3.2v to 9v, it didn't work in the maglight, I'm running 2 pairs of AA eneloops at 1.2v, 2.4v is not enough 

Wait a min I have a 6v light that I've been meaning to upgrade   
That's lucky it worked well in there 

[Yadda]

As my last drop in worked so well I went ahead and bought another one for my second maglight, 
the original seller had sold out so I ordered from somewhere else, unfortunately I didn't read the description well enough,
3.2v to 9v, it didn't work in the maglight, I'm running 2 pairs of AA eneloops at 1.2v, 2.4v is not enough 

Wait a min I have a 6v light that I've been meaning to upgrade   
That's lucky it worked well in there 

Looks like an option I may want to explore with my recently acquired 5D Brinkmann flashlight.

[MadPlumbarian]

A 45lb barbell weight, it just showed up via ups, the guy made me sign then says "here it's heavy" lol.. but the kid wants to start working out what he has in mind idk, but he said it's what he used when he was on the football team..
JR

[captain spaulding]

spyderco saver salt -

Congrats on a excellent low matenence knife.

[eamo]

thanks cap'n, yup, low maintenance is what i need, it'll be exposed to salt water and left in my pfd so wanted something i didn't have to worry about washing/drying etc.

[RF52]

Used gerber diesel that was covered in some kind of coating with sand in it, and now its been all in parts and cleaned and works like a charm

Sent fra min PLK-L01 via Tapatalk

[magentus]

A sweet parcel from the awesome Kev Davey. Kev sent me a blade exchanger from a Surge so I can mod it to fit my Gerber Multiplier, buty he also included a gorgeous Swissclump pouch, a Rough Rider bone handled canoe knife and Batman accompanied it all safely to me.

A Very nice Surprise Kev. Thanks a lot Sir