Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


What did you just get?

pfrsantos · 11973 · 439427
« previous next »
Pages: 1 ... 186 187 188 189 190 ... 400   Go Down

dk Offline MMR

  • No Life Club
  • ******
    • Posts: 1,937
Re: What did you just get?
Reply #5610 on: January 24, 2019, 02:46:01 PM
Quote from: Wspeed on January 21, 2019, 07:01:51 PM
Nice one MMR let us know what you think of the welder when you have used it  :tu: :like:

I had a little spare time today, so even though it is -5C outside, and I haven't recieved my proper welding mask and other welding stuff yet, I still decided to just give it a go on some scrap metal I had laying around.

To my own surprise, because it's gasless it is a lot more "sparky" than I thought it would be, almost like a stick welder.

My first attempt didn't turn out very pretty, but that was not the welders fault as I had miscalculated its adjustments, so that the wire speed was too high, I started out on 10, so I ended up making huge blobs of welds.

I also started out on 90A, which also to my own surprise was too high for the metal I was welding, as it literally turned half of it glowing red,  so I turned it down to 70A ........and that's when I ran out of metal to weld  :( ...but the few cm I got to weld 2-3mm metal on 70A also with the wire speed turned down to 7 from 10, it felt more right, but still not very "pretty" welds.

I think when I receive my proper welding mask, it will also be a lot easier to get right, because with the handheld and none auto-dimming mask, I first of all only had one hand to weld with, but also I couldn't see what I was doing until 2/3 into the weld, the whole start of the weld I had to guess and feel my way through.

But regardless, I think I just need a bit more practice with it, as it not only welds differently than the ones I learned to weld with, but also my welding experience is pretty much a week long course I took about two years ago and haven't welded since (until today).

Not to mention, this thing cost about 1/8th of price of getting a professional welding guy to come out to my parents house and weld their fence and flower box supports, so It's a win-win situation regardless.  :)

But tell you what; once I have gotten a bit more familiar with it and practiced a bit more, I will do a proper review of it.  :tu:
« Last Edit: January 24, 2019, 02:47:16 PM by MMR »
Kind regards,

MMR

-------------------------------------------------
"We all make choices, but in the end our choices make us."
- Andrew Ryan
-------------------------------------------------

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: What did you just get?
Reply #5611 on: January 24, 2019, 03:59:39 PM
Nice one MMR just remember
practice makes perfect  :tu: :like:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

it Offline balvenie

  • Full Member
  • ***
    • Posts: 164
Re: What did you just get?
Reply #5612 on: January 24, 2019, 07:02:43 PM
Got this on amazon
https://ibb.co/G01Fz6c
I have nothing against corkscrew, i'm Italian!!

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: What did you just get?
Reply #5613 on: January 24, 2019, 07:10:02 PM
Quote from: balvenie on January 24, 2019, 07:02:43 PM
Got this on amazon
https://ibb.co/G01Fz6c
I would be interested to know what you think
of them when you get those pliers  :tu: :popcorn:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

it Offline balvenie

  • Full Member
  • ***
    • Posts: 164
Re: What did you just get?
Reply #5614 on: January 24, 2019, 07:55:18 PM
Quote from: Wspeed on January 24, 2019, 07:10:02 PM
Quote from: balvenie on January 24, 2019, 07:02:43 PM
Got this on amazon
https://ibb.co/G01Fz6c
I would be interested to know what you think
of them when you get those pliers  :tu: :popcorn:
Honestly I didn't expect such quality. These pliers are well executed, the switch from needle nose to regular pliers is very smooth and ingenious. I think is just necessary to check if the steel is well hardened. I found a pictures of it on pinterest, so checked on amazon and decided to buy; but before That, I didn't know exist these pliers! Anyone knew?
« Last Edit: January 24, 2019, 07:58:04 PM by balvenie »
I have nothing against corkscrew, i'm Italian!!

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: What did you just get?
Reply #5615 on: January 24, 2019, 07:58:25 PM
The quality of the pliers is what I am interested in as well  :tu:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

dk Offline MMR

  • No Life Club
  • ******
    • Posts: 1,937
Re: What did you just get?
Reply #5616 on: January 24, 2019, 10:22:06 PM
I need these according to the average age on here







Sent from my iPhone using Tapatalk
Kind regards,

MMR

-------------------------------------------------
"We all make choices, but in the end our choices make us."
- Andrew Ryan
-------------------------------------------------

se Offline RF52

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,772
Re: What did you just get?
Reply #5617 on: January 24, 2019, 10:32:46 PM
Crkt Cordite Compact from Etherealicer :like: :hatsoff:

Sent fra min FRD-L09 via Tapatalk

Merit Badges Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Participate  in Challenge thread and post a photo of a Explorer SAK for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a 'folding hunter' knife that isn't a Buck 110 for thirty (30) consecutive days. Participants shall carry and use one Soldier knife, the model of their choosing, for the duration of the 90 days and post a picture each day. Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Must start a thread with a photo of your camo SAK Participate and contribute in Challenge thread and post a photo of either an Axe, MT/Folding knife or Fixed blade (picked at the beginning of challenge) for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a Spyderco knife for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the multitool for seven (7) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread with photos of your slasher/chopper/machete knives in use Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

ie Offline McStitchy

  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 19,785
Re: What did you just get?
Reply #5618 on: January 24, 2019, 11:37:00 PM
Quote from: MMR on January 24, 2019, 02:46:01 PM
Quote from: Wspeed on January 21, 2019, 07:01:51 PM
Nice one MMR let us know what you think of the welder when you have used it  :tu: :like:

I had a little spare time today, so even though it is -5C outside, and I haven't recieved my proper welding mask and other welding stuff yet, I still decided to just give it a go on some scrap metal I had laying around.

To my own surprise, because it's gasless it is a lot more "sparky" than I thought it would be, almost like a stick welder.

My first attempt didn't turn out very pretty, but that was not the welders fault as I had miscalculated its adjustments, so that the wire speed was too high, I started out on 10, so I ended up making huge blobs of welds.

I also started out on 90A, which also to my own surprise was too high for the metal I was welding, as it literally turned half of it glowing red,  so I turned it down to 70A ........and that's when I ran out of metal to weld  :( ...but the few cm I got to weld 2-3mm metal on 70A also with the wire speed turned down to 7 from 10, it felt more right, but still not very "pretty" welds.

I think when I receive my proper welding mask, it will also be a lot easier to get right, because with the handheld and none auto-dimming mask, I first of all only had one hand to weld with, but also I couldn't see what I was doing until 2/3 into the weld, the whole start of the weld I had to guess and feel my way through.

But regardless, I think I just need a bit more practice with it, as it not only welds differently than the ones I learned to weld with, but also my welding experience is pretty much a week long course I took about two years ago and haven't welded since (until today).

Not to mention, this thing cost about 1/8th of price of getting a professional welding guy to come out to my parents house and weld their fence and flower box supports, so It's a win-win situation regardless.  :)

But tell you what; once I have gotten a bit more familiar with it and practiced a bit more, I will do a proper review of it.  :tu:

You've got to cover your eyes MMR  :pok:
I'm sure you'll soon have found your feeling for it  :tu:
Merit Badges Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Participate  in Challenge thread and post a photo of your EDC or a component of the EDC that got used during the course of the day for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must put something in order and provide link to the post. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Test,please ignore Must start a thread with a photo of at least five (5) of your watches Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days.

ie Offline McStitchy

  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 19,785
Re: What did you just get?
Reply #5619 on: January 24, 2019, 11:37:35 PM
Quote from: MMR on January 24, 2019, 10:22:06 PM
I need these according to the average age on here


(Image removed from quote.)

(Image removed from quote.)


Sent from my iPhone using Tapatalk

« Last Edit: January 24, 2019, 11:38:40 PM by MTMatt »
Merit Badges Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Participate  in Challenge thread and post a photo of your EDC or a component of the EDC that got used during the course of the day for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must put something in order and provide link to the post. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Test,please ignore Must start a thread with a photo of at least five (5) of your watches Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days.

ie Offline McStitchy

  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 19,785
Re: What did you just get?
Reply #5620 on: January 24, 2019, 11:39:24 PM
Quote from: balvenie on January 24, 2019, 07:55:18 PM
Quote from: Wspeed on January 24, 2019, 07:10:02 PM
Quote from: balvenie on January 24, 2019, 07:02:43 PM
Got this on amazon
https://ibb.co/G01Fz6c
I would be interested to know what you think
of them when you get those pliers  :tu: :popcorn:
Honestly I didn't expect such quality. These pliers are well executed, the switch from needle nose to regular pliers is very smooth and ingenious. I think is just necessary to check if the steel is well hardened. I found a pictures of it on pinterest, so checked on amazon and decided to buy; but before That, I didn't know exist these pliers! Anyone knew?

Interesting  :tu:
Merit Badges Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Participate  in Challenge thread and post a photo of your EDC or a component of the EDC that got used during the course of the day for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must put something in order and provide link to the post. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Test,please ignore Must start a thread with a photo of at least five (5) of your watches Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days.

us Offline gerleatherberman

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,549
  • Man of Multiple MultiTool Manufacturers
Re: What did you just get?
Reply #5621 on: January 25, 2019, 04:42:56 AM
Got this dirty tool on ebay. Subsequently got a bath before mating with another 600.  :ahhh

Pontificating particularly pious positions pertaining to polymorphic paraphernalia. G-Man.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of at least 5 different Charge models in your collection Start a new thread and post a photo of the multitool for seven (7) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your astronomy gear with a multitool Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Buck knives in use Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Start a thread with photos of at least 5 different MP600 models in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must buy an item through the MTo Store

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: What did you just get?
Reply #5622 on: January 25, 2019, 12:40:55 PM
Good job GLBM  :tu: :like:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

us Offline gerleatherberman

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,549
  • Man of Multiple MultiTool Manufacturers
Re: What did you just get?
Reply #5623 on: January 25, 2019, 02:19:09 PM
Pontificating particularly pious positions pertaining to polymorphic paraphernalia. G-Man.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of at least 5 different Charge models in your collection Start a new thread and post a photo of the multitool for seven (7) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your astronomy gear with a multitool Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Buck knives in use Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Start a thread with photos of at least 5 different MP600 models in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must buy an item through the MTo Store

dk Offline MMR

  • No Life Club
  • ******
    • Posts: 1,937
Re: What did you just get?
Reply #5624 on: January 25, 2019, 04:33:20 PM
Kind regards,

MMR

-------------------------------------------------
"We all make choices, but in the end our choices make us."
- Andrew Ryan
-------------------------------------------------

us Offline Stormdrane

  • No Life Club
  • ******
    • Posts: 1,171
  • Be Prepared
Re: What did you just get?
Reply #5625 on: January 25, 2019, 09:06:18 PM

In today's mail, a Marbles Camp Combo. I previously had both in the gadget drawer collection, but they ended up with my Pa or maybe it was a brother-in-law a few years ago. I had a gift card to use up, so the new set will probably get a lanyard or two to go with 'em until someone's birthday or some such comes up...  :D

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,118
  • Plumbers Know Their Crap!!
Re: What did you just get?
Reply #5626 on: January 25, 2019, 09:53:20 PM
Nice sporkopener,
JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Start a new thread with photos of your titanium gear with a multitool or sak Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread demonstrating paracord knot tying Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of a modded knife or multitool with your EDC

us Offline ezdog

  • No Life Club
  • ******
    • Posts: 1,705
Re: What did you just get?
Reply #5627 on: January 26, 2019, 01:15:52 AM
I got this horrible light!
It was cheap and I hoped it might be decent for working inside racks where it can stick by the magnet in the tail.
The clippy thing is a holster that it can live in and it sticks in there with the magnet too.
So it has 2 brutal light levels in "White" ,1 Red,1 Green and a flashy red and scrolls through all of them to off.

Feels solid and good run times listed on package.

Not recommended :twak:




Sent from my iPhone,dont expect too much
« Last Edit: January 26, 2019, 01:20:05 AM by ezdog »
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline gerleatherberman

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,549
  • Man of Multiple MultiTool Manufacturers
Re: What did you just get?
Reply #5628 on: January 26, 2019, 02:31:27 AM
Sheesh, that's too many color settings for a cob light. :ahhh
Pontificating particularly pious positions pertaining to polymorphic paraphernalia. G-Man.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of at least 5 different Charge models in your collection Start a new thread and post a photo of the multitool for seven (7) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your astronomy gear with a multitool Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Buck knives in use Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Start a thread with photos of at least 5 different MP600 models in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must buy an item through the MTo Store

us Offline gerleatherberman

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,549
  • Man of Multiple MultiTool Manufacturers
Re: What did you just get?
Reply #5629 on: January 26, 2019, 02:32:17 AM
These babies arrived. T3 MP400, T3 MP600, and T3 MP700.
The 600 and 700 were in packaging, but it was yellowed and brittle. Let the Gerbers breath!

Pontificating particularly pious positions pertaining to polymorphic paraphernalia. G-Man.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of at least 5 different Charge models in your collection Start a new thread and post a photo of the multitool for seven (7) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your astronomy gear with a multitool Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Buck knives in use Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Start a thread with photos of at least 5 different MP600 models in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must buy an item through the MTo Store

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: What did you just get?
Reply #5630 on: January 26, 2019, 12:28:58 PM
Very nice selection of Gerbers GLBM  :cheers: :like:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

dk Offline MMR

  • No Life Club
  • ******
    • Posts: 1,937
Re: What did you just get?
Reply #5631 on: January 26, 2019, 12:38:59 PM
Was there a Gerber MT in the T3 movie?


Sent from my iPhone using Tapatalk
Kind regards,

MMR

-------------------------------------------------
"We all make choices, but in the end our choices make us."
- Andrew Ryan
-------------------------------------------------

dk Offline MMR

  • No Life Club
  • ******
    • Posts: 1,937
Re: What did you just get?
Reply #5632 on: January 26, 2019, 12:40:11 PM
Pardon my manners; congrats with your new Gerbers GLBM :)


Sent from my iPhone using Tapatalk
Kind regards,

MMR

-------------------------------------------------
"We all make choices, but in the end our choices make us."
- Andrew Ryan
-------------------------------------------------

de Offline CeHo

  • *
  • No Life Club
  • ******
    • Posts: 2,135
Re: What did you just get?
Reply #5633 on: January 26, 2019, 01:54:36 PM
Quote from: gerleatherberman on January 26, 2019, 02:32:17 AM
These babies arrived. T3 MP400, T3 MP600, and T3 MP700.
The 600 and 700 were in packaging, but it was yellowed and brittle. Let the Gerbers breath!

(Image removed from quote.)

Amazing  :like:

Congrats your collection is on of the best here!

Best regards from Germany
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa.

de Offline CeHo

  • *
  • No Life Club
  • ******
    • Posts: 2,135
Re: What did you just get?
Reply #5634 on: January 26, 2019, 03:15:37 PM
















Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa.

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: What did you just get?
Reply #5635 on: January 26, 2019, 03:37:28 PM
Very nice selection of tools you got CeHo  :dd: :like: :like:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

de Offline CeHo

  • *
  • No Life Club
  • ******
    • Posts: 2,135
Re: What did you just get?
Reply #5636 on: January 26, 2019, 03:53:17 PM
Many thanks 👍
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa.

us Offline VICMAN

  • *
  • Zombie Apprentice
  • ********
    • Posts: 12,472
Re: What did you just get?
Reply #5637 on: January 26, 2019, 04:39:53 PM
Quote from: CeHo on January 26, 2019, 03:15:37 PM


Nice pics CeHo! :like: :tu: :tu:

Great group of tools! :cheers:
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 8 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Start a new thread with photos of your Buck knives in use Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your stayglow SAK

de Offline CeHo

  • *
  • No Life Club
  • ******
    • Posts: 2,135
Re: What did you just get?
Reply #5638 on: January 26, 2019, 05:10:09 PM
Thanks VICMAN
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa.

dk Offline MMR

  • No Life Club
  • ******
    • Posts: 1,937
Re: What did you just get?
Reply #5639 on: January 26, 2019, 05:15:26 PM
Kind regards,

MMR

-------------------------------------------------
"We all make choices, but in the end our choices make us."
- Andrew Ryan
-------------------------------------------------

Pages: 1 ... 186 187 188 189 190 ... 400   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $122.41
PayPal Fees: $6.85
Net Balance: $115.56
Below Goal: $184.44
Site Currency: USD
39% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal