tti & new wave :screwdriver problem

[raptor]

the philips screwdriver is removable but too short and thick.when dealing with a screw in a hole,there comes the problem:it can't dig in. so i prefer the one in BLAST or FUSE.

[E. Danny]

Some on here have modded a new Wave with a Blast/Fuse/Kick phillips.

[Spoonrobot]

This was a pretty big deal when the tools were first released in 2004.

Really depends on what you typically encounter. I haven't seen a tunneled fastener in years but I do deal with the dozens of different fastener head types. Thus, I keep a New Wave in my bag with the complete bit kit. It's come in really handy a few times, most people don't have torx or allen drivers.

[Teofilo]

RAptor, I dunno if this could help:http:
http://forum.multitool.org/index.php/topic,4081.0.html

[Leatherman123]

Yeah, but if I think I will come across recessed screws I will bring my LM Bit Extender and 4 long hex bits.. ( slotted- 1/4, 3/16 and philips- #1 and #2)

[raptor]

RAptor, I dunno if this could help:http:
http://forum.multitool.org/index.php/topic,4081.0.html

still has another problem:not long enough.

[jzmtl]

RAptor, I dunno if this could help:http:
http://forum.multitool.org/index.php/topic,4081.0.html

still has another problem:not long enough.

Well you could use the bits that are up to six inches long.

[Rob]

I'm with Leatherman123.  I use a bit driver extender and some extra long 1/4" hex bits.  Gets the job done just fine.

[Leatherman123]

Yeah, I also got my bit extender for free from LM too!

[raptor]

RAptor, I dunno if this could help:http:
http://forum.multitool.org/index.php/topic,4081.0.html

still has another problem:not long enough.

Well you could use the bits that are up to six inches long.

I couldn't use the bits that are only six millimeters long.

[jzmtl]

RAptor, I dunno if this could help:http:
http://forum.multitool.org/index.php/topic,4081.0.html

still has another problem:not long enough.

Well you could use the bits that are up to six inches long.

I couldn't use the bits that are only six millimeters long.

 

6 inch = 154 mm

[raptor]

RAptor, I dunno if this could help:http:
http://forum.multitool.org/index.php/topic,4081.0.html

still has another problem:not long enough.

Well you could use the bits that are up to six inches long.

I couldn't use the bits that are only six millimeters long.

 

6 inch = 154 mm

I mean the phillips screwdriver of  tti is about six millimeters long.

[Leatherman123]

Yeah, but that's not the case with the Swisstools. The drivers are just too rounded and polished!