im kinda stumped

[JAfromMn]

I'm going to be needing a new knife for work.

I'm going to be doing a review of the Gerber mp600.

it lacks a saw. I know I will be lost without one.

id like a good quality one hand opening folder with a saw blade and pocket clip.

A 4 inch blade, tip up carry and made in USA are all preferred.

I couldn't find one.

also the cheaper the better

HELP

thanks for your suggestions .

[Crow]

http://www.sakwiki.com/tiki-index.php?page=Soldier+2008

Not exactly US made, but something you might like...

[JAfromMn]

http://www.sakwiki.com/tiki-index.php?page=Soldier+2008

Not exactly US made, but something you might like...

id go with a oh trekker or German army knife but it lacks a clip.

I don't want to wear two sheaths.

I do love sak,s

I may not have another choice.

that's is as close to what I want as I could find.

[bmot]

http://www.sakwiki.com/ti...dex.php?page=Soldier+2008

Not exactly US made, but something you might like...

id go with a oh trekker or German army knife but it lacks a clip.

I don't want to wear two sheaths.

I do love sak,s

I may not have another choice.

that's is as close to what I want as I could find.

You can get one of the clipped Sentinel's, and swap the scales over, then it will have a clip


Besides that, the serrations on those OHT's are wicked

[kirk13]

SwissBianco do a pocket clip for the liner lock 111mm

[Zed]

SwissBianco do a pocket clip for the liner lock 111mm

I need too check that myself 

[kirk13]

SwissBianco do a pocket clip for the liner lock 111mm

I need too check that myself 

You'd need to go through Alexi on the Canadian site
http://www.swissbianco.ca/products.htm

[Zed]

Cheers john  seems good value depending on postage 

[kirk13]

Cheers john  seems good value depending on postage 

Pm heading your way,but basically,speak to him,and he'll be able to give you a quote. I got scales from him last year,and everything was bang on!

[JAfromMn]

Its looking like a sak is the way to go.

[JAfromMn]

This fox knife is just about perfect except the price is way way to much for me to spend on a work knife

http://www.knifecenter.com/item/FOXALSR49/FOX-49-Dgree-Capricorno-2-Blade-Folding-5-78-inch-Closed-Combo-Blade-and-Saw-G10-Handles

[derekmac]

SwissBianco do a pocket clip for the liner lock 111mm

I need too check that myself 

You'd need to go through Alexi on the Canadian site
http://www.swissbianco.ca/products.htm

Oh sweet, and only $14!  This is getting bookmarked for later. 

[sawman]

This fox knife is just about perfect except the price is way way to much for me to spend on a work knife

http://www.knifecenter.com/item/FOXALSR49/FOX-49-Dgree-Capricorno-2-Blade-Folding-5-78-inch-Closed-Combo-Blade-and-Saw-G10-Handles

If they're so pricey how come I've never heard of them before I just think of how many Spydies or Benchmades I could get for that money

[JAfromMn]

Cheaper

http://www.bladehq.com/item--Buck-183-Alpha-Crosslock-Knife--21638

still just a bit high for me.

[sawman]

Cheaper

http://www.bladehq.com/item--Buck-183-Alpha-Crosslock-Knife--21638

still just a bit high for me.

First I've seen that model. I don't buy a lot of Bucks but it seems like a reasonable price.

[JAfromMn]

To cheap maybe

http://www.ebay.com/itm/Sanrenmu-T16-BY2-Construction-Folding-Knife-Two-Blades-in-One-New-/251341236004?pt=Collectible_Knives&hash=item3a851ae724

I've heard good things about the brand but never tried one.

[Styerman]

The Fox products I've seen were good quality . I believe Fox USA , makes some models in the US .

Chris

[sawman]

To cheap maybe

http://www.ebay.com/itm/Sanrenmu-T16-BY2-Construction-Folding-Knife-Two-Blades-in-One-New-/251341236004?pt=Collectible_Knives&hash=item3a851ae724

I've heard good things about the brand but never tried one.

Only problem with that is it looks a little over-priced... 

[JAfromMn]

To cheap maybe

http://www.ebay.com/itm/Sanrenmu-T16-BY2-Construction-Folding-Knife-Two-Blades-in-One-New-/251341236004?pt=Collectible_Knives&hash=item3a851ae724

I've heard good things about the brand but never tried one.

Only problem with that is it looks a little over-priced... 

lol I have no idea.

I know little to nothing about the brand.

I do know its smaller than id like

[JAfromMn]

I'm think I'm going to get the crosslock

its as close to what I want as I can find.

I'm going to sell one of my enduras to fund it

[sawman]

I'm think I'm going to get the crosslock

its as close to what I want as I can find.

I'm going to sell one of my enduras to fund it

I think that's a good choice. I just hope, being Buck, its screws don't pop out on you. Anything they make with screws - they tend to pop out and get lost. I'm not sure but I don't think they use Loctite...

[JAfromMn]

I'm think I'm going to get the crosslock

its as close to what I want as I can find.

I'm going to sell one of my enduras to fund it

I think that's a good choice. I just hope, being Buck, its screws don't pop out on you. Anything they make with screws - they tend to pop out and get lost. I'm not sure but I don't think they use Loctite...

Il have to take it apart and put it back together right.

[sawman]

I'm think I'm going to get the crosslock

its as close to what I want as I can find.

I'm going to sell one of my enduras to fund it

I think that's a good choice. I just hope, being Buck, its screws don't pop out on you. Anything they make with screws - they tend to pop out and get lost. I'm not sure but I don't think they use Loctite...

Il have to take it apart and put it back together right.

Good idea.

[lowtech]

http://www.sakwiki.com/ti...dex.php?page=Soldier+2008

Not exactly US made, but something you might like...

id go with a oh trekker or German army knife but it lacks a clip.

I don't want to wear two sheaths.

I do love sak,s

I may not have another choice.

that's is as close to what I want as I could find.

You can get one of the clipped Sentinel's, and swap the scales over, then it will have a clip


Besides that, the serrations on those OHT's are wicked

The clipped Sentinels only come without backside tool - The scales will only fit on models without a backtool because they lack the cutout. The Swissbianco clip is the way to go if you want backtools.

[JAfromMn]

http://www.sakwiki.com/ti...dex.php?page=Soldier+2008

Not exactly US made, but something you might like...

id go with a oh trekker or German army knife but it lacks a clip.

I don't want to wear two sheaths.

I do love sak,s

I may not have another choice.

that's is as close to what I want as I could find.

You can get one of the clipped Sentinel's, and swap the scales over, then it will have a clip


Besides that, the serrations on those OHT's are wicked

The clipped Sentinels only come without backside tool - The scales will only fit on models without a backtool because they lack the cutout. The Swissbianco clip is the way to go if you want backtools.

I didn't know that

thanks for the info lowtech

[lowtech]

No problem - I found it out when I bought my first Sentinel clip to equip my Nomad with a pocket clip...

[b00mhower]

One of the kershaw funxion (sp?) models has a pretty nice saw, no experience just heard it through the grapevine from a few friends of friends. Also maybe look for a Byrd Wings(I believe that's the model name) sorry if I'm late to the party lol


ΜΟΛΩΝ ΛΑΒΕ

[JAfromMn]

Thanks b00mhower

http://www.gpknives.com/kaifunxionoutdoor.html

that is a neat Kershaw. I'm going to stick to the made in USA buck though.

the Byrd wings has plane and serrated blades