Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


REBAR needs scissors and a chissel

sawman · 28 · 2559
« previous next »
Pages: 1   Go Down

us Offline sawman

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,745
  • You're amongst friends.
REBAR needs scissors and a chissel
on: June 04, 2015, 06:13:36 PM
What could we take out of the Rebar to squeeze some PSTII-type scissors and a chissel in?

The first culperate I will name is the file, as it's probably the worst tool on the Rebar.

Also, do we really need the lanyard loop?

What are your thoughts?
SAW

us Offline eddie1115

  • *
  • No Life Club
  • ******
    • Posts: 1,760
Re: REBAR needs scissors and a chissel
Reply #1 on: June 04, 2015, 06:40:49 PM
Sub'd  :tu:

I have some Wave parts (including) scissors that I've been wanting to add to my Rebar.  I'd agree with the file, and I've never needed the lanyard loop, it's either in my pocket or in a sheath.  And for me, the can opener is almost always expendable, though it can be a decent package opener.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must buy something on EDCSource Must put something in order and provide link to the post. Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least three (3) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread with pictures of a Fish Scaler in use Must start a thread showing a photo of at least three BO tools Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with photos of camping, including those showing preferred camping equipment

00 Offline kirk13

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,281
Re: REBAR needs scissors and a chissel
Reply #2 on: June 04, 2015, 06:46:41 PM
Al's Rebar mod
http://forum.multitool.org/index.php/topic,57029.0.html

There's a thread about my one somewhere too... :think:
There is no beginning,or ending,and for this we are thankful,cos now is hard enough to understand!
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of a Japanese made PST in your collection

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 68,066
Re: REBAR needs scissors and a chissel
Reply #3 on: June 04, 2015, 06:57:38 PM
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month.

gb Offline AimlessWanderer

  • *
  • Zombie Apprentice
  • ********
    • Posts: 17,517
  • I'm not a pessimist, I'm an experienced optimist!
Re: REBAR needs scissors and a chissel
Reply #4 on: June 04, 2015, 06:58:14 PM
Quote from: kirk13 on June 04, 2015, 06:46:41 PM
Al's Rebar mod
http://forum.multitool.org/index.php/topic,57029.0.html

There's a thread about my one somewhere too... :think:

Beat me to it!  :D

I ditched the knives as I always prefer having a seperate knife, besides which, the ones onthe Rebar are quite underwhelming IMHO


The cantankerous but occasionally useful member, formally known as 50ft-trad

gb Offline pingu

  • *
  • Sr. Member
  • ****
    • Posts: 487
Re: REBAR needs scissors and a chissel
Reply #5 on: June 04, 2015, 07:14:49 PM
Well the file and the lanyard loop together are about (Wave) scissors thickness so no great loss if you don't value either.   What are you making the chisel from?

Easy to make alternative provision for cutting and bottle opening.

« Last Edit: June 04, 2015, 08:21:19 PM by pingu »
Merit Badges Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC

us Offline Barry Rowland

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 24,895
  • Bon Journee!!
Re: REBAR needs scissors and a chissel
Reply #6 on: June 04, 2015, 09:00:21 PM
I really think they left the scissors out to keep the Rebar from reaching perfection!  I really wish it came from them.  I'm amazed after all these years and all the feedback that Leatherman doesn't make them standard like they do the file, etc.
Barry
Merit Badges Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo showing the axe in use Participate in a Challenge thread and post a photo of  a Opinel  knife  for 30 days Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Vic Spirit MT for sixty (60) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a challenge by carrying  a Combo Edged knife or Multitool and post a photo of it  for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread or Post in a Challenge Thread and post a photo of a Spartan  for 30 days Must start a thread with a photo of at least three (3) of your watches Participants shall carry and use one Soldier knife, the model of their choosing, for the duration of the 90 days and post a picture each day. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Delemont SAK for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Participate  in Challenge thread and post a photo of your EDC or a component of the EDC that got used during the course of the day for thirty (30) consecutive days. For each of the 30 days, or for as many as you are able to, post a picture of: Progress- Meals- Activities- Gear and participate in the thread and encourage each other. Participate  in Challenge thread and post a photo of an Old Cross SAK for thirty (30) consecutive days.

gb Offline pingu

  • *
  • Sr. Member
  • ****
    • Posts: 487
Re: REBAR needs scissors and a chissel
Reply #7 on: June 04, 2015, 10:54:32 PM
Quote from: Barry Rowland on June 04, 2015, 09:00:21 PM
I really think they left the scissors out to keep the Rebar from reaching perfection! 

Wouldn't that require a diamond coated file as a minimum?

What would give to make room?   I fear somebody at LM would say yes we can if we install a single combo blade.  Whatever purists say about the current blade fit that surely would cue howls of protest.

I say that a knifeless Rebar is a great toolbox and that could/should be a stock model with scissors.

Merit Badges Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC

us Offline sawman

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,745
  • You're amongst friends.
Re: REBAR needs scissors and a chissel
Reply #8 on: June 04, 2015, 10:57:40 PM
I'm torn. I actually use the blades on my Rebar quite often. I'm beginning to think the thing just needs to be made wider to facilitate the extra items  :think:

Scary.... isn't this how the Swiss Champ came about  :pok: >:D
SAW

us Offline Demel

  • *
  • No Life Club
  • ******
    • Posts: 2,476
Re: REBAR needs scissors and a chissel
Reply #9 on: June 04, 2015, 10:58:55 PM
Quote from: Barry Rowland on June 04, 2015, 09:00:21 PM
I really think they left the scissors out to keep the Rebar from reaching perfection!  I really wish it came from them.  I'm amazed after all these years and all the feedback that Leatherman doesn't make them standard like they do the file, etc.
Agreed
"Talent is God given. Be humble. Fame is man-given. Be grateful. Conceit is self-given. Be careful." -John Wooden
Merit Badges Start a new thread with photos of your titanium gear with a multitool or sak Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread with a photo showing the Hook in use Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Must start a thread with a photo of at least five (5) of your watches Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge.

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 68,066
Re: REBAR needs scissors and a chissel
Reply #10 on: June 04, 2015, 11:17:09 PM
Quote from: sawman on June 04, 2015, 10:57:40 PM
I'm torn. I actually use the blades on my Rebar quite often. I'm beginning to think the thing just needs to be made wider to facilitate the extra items  :think:

Scary.... isn't this how the Swiss Champ came about  :pok: >:D

You can fit the wave scissors without losing anything with a little thinning of the can opener and lanyard ring. Or you can go crazy like Obishinobee's ReBlaster where he added the locks and pivots from a Blast to this Rebar.
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month.

00 Offline kirk13

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,281
Re: REBAR needs scissors and a chissel
Reply #11 on: June 05, 2015, 12:21:50 AM
Bit late,but here's my Rebar
There is no beginning,or ending,and for this we are thankful,cos now is hard enough to understand!
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of a Japanese made PST in your collection

nz Online zoidberg

  • Global Moderator
  • Point Of No Return
  • *
    • Posts: 37,846
Re: REBAR needs scissors and a chissel
Reply #12 on: June 05, 2015, 02:59:35 AM
Add a chisel tip to the file and replace the can opener and lanyard ring for scissors.  :think:

au Offline gregozedobe

  • Absolutely No Life Club
  • *******
    • Posts: 5,100
  • Apparently it is possible to have too many tools;)
Re: REBAR needs scissors and a chissel
Reply #13 on: June 05, 2015, 04:14:33 AM
Quote from: zoidberg on June 05, 2015, 02:59:35 AM
Add a chisel tip to the file

But isn't the file hardened ? (and therefore too brittle to be used for prying or as a chisel)  ???
babola: "Enjoy your tools and don't be afraid to air your opinion and feelings here, but do it in courteous and respectable way toward others, of course."

nz Online zoidberg

  • Global Moderator
  • Point Of No Return
  • *
    • Posts: 37,846
Re: REBAR needs scissors and a chissel
Reply #14 on: June 05, 2015, 04:26:34 AM
Quote from: gregozedobe on June 05, 2015, 04:14:33 AM
Quote from: zoidberg on June 05, 2015, 02:59:35 AM
Add a chisel tip to the file

But isn't the file hardened ? (and therefore too brittle to be used for prying or as a chisel)  ???

I found the file was pretty soft. I probably wouldn't pry or twist with it but as a small scraper it should be more than okay.

us Offline Roche

  • Jr. Member
  • **
    • Posts: 89
Re: REBAR needs scissors and a chissel
Reply #15 on: June 05, 2015, 04:30:59 AM
Why add lame scissors to the Rebar?  Is any scissor smaller than the Micra really worth the bother? 

us Offline mrynnr

  • SAK Addict
  • *
  • No Life Club
  • ******
    • Posts: 4,188
Re: REBAR needs scissors and a chissel
Reply #16 on: June 05, 2015, 04:34:56 AM
Sounds like you need a spirit
Merit Badges Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo showing the axe in use Must start a thread showing a photo of at least five BO tools Start a thread with photos of at least twelve different colored ALOX models in your collection Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread with a photo showing the Hook in use Start a new thread and post a photo of a flashlight as part of your EDC Must buy something on EDCSource Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC

wales Offline hiraethus

  • Admin Team
  • *
  • Absolutely No Life Club
  • *
    • Posts: 6,965
  • I brake for cake
Re: REBAR needs scissors and a chissel
Reply #17 on: June 05, 2015, 07:04:28 AM
She's right you know. :pok:
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Must update or add a page on SAKWiki Must start a thread showing a photo of at least three BO tools Start a new thread with a photo of your custom ALOX with scissors Start a thread with a photo of a repair you made with duct tape Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK

gb Offline pingu

  • *
  • Sr. Member
  • ****
    • Posts: 487
Re: REBAR needs scissors and a chissel
Reply #18 on: June 05, 2015, 09:42:27 AM
Quote from: zoidberg on June 05, 2015, 02:59:35 AM
Add a chisel tip to the file and replace the can opener and lanyard ring for scissors.  :think:

I continue to be wowed and mystified in equal measures just how much it is possible to fit in.  Don't currently have the (Wave) scissors installed as I'm short of numbers but the Wingman package opener and file/hex wrench are place holders for the scissors.  The same width as the removed blades.  The lanyard ring is thinner from another tool and the cap lifter is thinned yet I only have a 0.5mm washer spare.  Hence the mystery.

Anyway back to your file suggestion.  I don't know about the Rebar file material but as it happened I have a SOG file installed, the original having gone to Fuse. Didn't notice until now it has a screwdriver tip so that could easily be ground to a scraper.  Good suggestion  :salute:
P1020214.JPG
* P1020214.JPG (Filesize: 252.11 KB)
« Last Edit: June 05, 2015, 09:43:58 AM by pingu »
Merit Badges Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC

au Offline Huntsman

  • Global Moderator
  • *
  • No Life Club
  • *
    • Posts: 4,650
Re: REBAR needs scissors and a chissel
Reply #19 on: June 05, 2015, 01:35:04 PM
Quote from: Roche on June 05, 2015, 04:30:59 AM
Why add lame scissors to the Rebar?  Is any scissor smaller than the Micra really worth the bother?

Of course Victorinox SAK scissors - Best in the business
Except maybe the Micra !  :D
« Last Edit: June 05, 2015, 01:36:20 PM by Huntsman »
Merit Badges Must update or add a page on SAKWiki Start a new thread with photos of a Japanese made PST in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least eight different colored ALOX models in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection Must put something in order and provide link to the post.

us Offline ducttapetech

  • Zombie Apprentice
  • ********
    • Posts: 18,707
  • Whiskey Tango Foxtrot, over.
Re: REBAR needs scissors and a chissel
Reply #20 on: June 05, 2015, 01:37:07 PM
Even better than those, add Surge scissors.

Nate
That's us mobile

Nate

SEND IT!
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with photos of your Mora knives in use Start a new thread with photos of your chainsaws Start a new thread with a photo showing the axe in use Test,please ignore Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread with photos of camping, including those showing preferred camping equipment Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms) Must buy something on EDCSource Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread showing photos of your outdoor cooking Start a new thread and post a photo of a flashlight as part of your EDC Must start new thread with photos of multitools (Magazine/Catalogue type photos)

au Offline Huntsman

  • Global Moderator
  • *
  • No Life Club
  • *
    • Posts: 4,650
Re: REBAR needs scissors and a chissel
Reply #21 on: June 05, 2015, 02:04:17 PM
And to answer your question:

Easy
  • One of the blades: Surely you can manage with one or the other
  • One of the screwdrivers: Do you really need two?

Or better still buy a Swisstool Spirit  :D
No need for a mod!!
Merit Badges Must update or add a page on SAKWiki Start a new thread with photos of a Japanese made PST in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least eight different colored ALOX models in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection Must put something in order and provide link to the post.

us Offline Obi1shinobee

  • Absolutely No Life Club
  • *******
    • Posts: 6,661
  • Master LM Squirt Ps4 And Lord of Navitools
Re: REBAR needs scissors and a chissel
Reply #22 on: June 06, 2015, 04:31:38 AM
Quote from: ducttapetech on June 05, 2015, 01:37:07 PM
Even better than those, add Surge scissors.

Nate
That's us mobile
:rofl:
Merit Badges Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the copper flashlight for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline ducttapetech

  • Zombie Apprentice
  • ********
    • Posts: 18,707
  • Whiskey Tango Foxtrot, over.
Re: REBAR needs scissors and a chissel
Reply #23 on: June 06, 2015, 04:55:00 AM


Quote from: Huntsman on June 05, 2015, 02:04:17 PM
And to answer your question:

Easy
  • One of the blades: Surely you can manage with one or the other
  • One of the screwdrivers: Do you really need two?

Or better still buy a Swisstool Spirit  :D
No need for a mod!!

Plenty of room for mods for the Swiss Spirit.

Nate
That's us mobile

Nate

SEND IT!
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with photos of your Mora knives in use Start a new thread with photos of your chainsaws Start a new thread with a photo showing the axe in use Test,please ignore Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread with photos of camping, including those showing preferred camping equipment Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms) Must buy something on EDCSource Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread showing photos of your outdoor cooking Start a new thread and post a photo of a flashlight as part of your EDC Must start new thread with photos of multitools (Magazine/Catalogue type photos)

us Offline ducttapetech

  • Zombie Apprentice
  • ********
    • Posts: 18,707
  • Whiskey Tango Foxtrot, over.
Re: REBAR needs scissors and a chissel
Reply #24 on: June 06, 2015, 04:55:57 AM
Quote from: Obi1shinobee on June 06, 2015, 04:31:38 AM
Quote from: ducttapetech on June 05, 2015, 01:37:07 PM
Even better than those, add Surge scissors.

Nate
That's us mobile
:rofl:
Lmao! Long time, no see Obi1!


Nate
That's us mobile

Nate

SEND IT!
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with photos of your Mora knives in use Start a new thread with photos of your chainsaws Start a new thread with a photo showing the axe in use Test,please ignore Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread with photos of camping, including those showing preferred camping equipment Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms) Must buy something on EDCSource Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread showing photos of your outdoor cooking Start a new thread and post a photo of a flashlight as part of your EDC Must start new thread with photos of multitools (Magazine/Catalogue type photos)

us Offline Obi1shinobee

  • Absolutely No Life Club
  • *******
    • Posts: 6,661
  • Master LM Squirt Ps4 And Lord of Navitools
Re: REBAR needs scissors and a chissel
Reply #25 on: June 06, 2015, 04:57:39 AM
Quote from: ducttapetech on June 06, 2015, 04:55:57 AM
Quote from: Obi1shinobee on June 06, 2015, 04:31:38 AM
Quote from: ducttapetech on June 05, 2015, 01:37:07 PM
Even better than those, add Surge scissors.

Nate
That's us mobile
:rofl:
Lmao! Long time, no see Obi1!


Nate
That's us mobile
I'm super duper busy. Hardly have time to sit down and post :facepalm:
Merit Badges Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the copper flashlight for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline ducttapetech

  • Zombie Apprentice
  • ********
    • Posts: 18,707
  • Whiskey Tango Foxtrot, over.
Re: REBAR needs scissors and a chissel
Reply #26 on: June 06, 2015, 04:59:30 AM
Understandable. Life sometimes get busy.

Nate
That's us mobile

Nate

SEND IT!
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with photos of your Mora knives in use Start a new thread with photos of your chainsaws Start a new thread with a photo showing the axe in use Test,please ignore Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread with photos of camping, including those showing preferred camping equipment Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms) Must buy something on EDCSource Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread showing photos of your outdoor cooking Start a new thread and post a photo of a flashlight as part of your EDC Must start new thread with photos of multitools (Magazine/Catalogue type photos)

us Offline Obi1shinobee

  • Absolutely No Life Club
  • *******
    • Posts: 6,661
  • Master LM Squirt Ps4 And Lord of Navitools
Re: REBAR needs scissors and a chissel
Reply #27 on: June 06, 2015, 05:00:56 AM
Quote from: ducttapetech on June 06, 2015, 04:59:30 AM
Understandable. Life sometimes get busy.

Nate
That's us mobile

ReBlaster with Surge scissor that could be Danger  :gimme:
image.jpg
* image.jpg (Filesize: 153.01 KB)
Merit Badges Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the copper flashlight for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

Pages: 1   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
June Goal: $300.00
Due Date: Jun 30
Total Receipts: $139.46
PayPal Fees: $8.05
Net Balance: $131.41
Below Goal: $168.59
Site Currency: USD
44% 
June Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal