What's so special about 111mm SAK's?

gene stoner · **Reply #60 on:** March 19, 2016, 04:23:00 PM

Scored a camo Hunter.

LoopCutter · **Reply #61 on:** March 19, 2016, 05:49:54 PM

I have had mine only a week, carried in tool bag, but pulled out for saw time, did number on tuning up conduit run, and it fits my large paws very well.

the bottom one

*via Tapatalk

firiki · **Reply #62 on:** March 22, 2016, 02:01:50 PM

Something really special about the 111mm SAKs is that on the three-layer linerlock models the knife blade is in the middle of the handle. Only these and the Solos have that!

Weasel · **Reply #63 on:** March 23, 2016, 12:46:19 PM

Quote from: gene stoner on March 19, 2016, 04:23:00 PM

Scored a camo Hunter.

very nice i like that a lot

pfrsantos · **Reply #64 on:** March 23, 2016, 12:47:57 PM

Quote from: gene stoner on March 19, 2016, 04:23:00 PM

Scored a camo Hunter.

Really?! Where?! Let's see it!

Paul DeBuhr · **Reply #65 on:** March 23, 2016, 05:03:06 PM

Is the glass breaker from the rescue tool interchangeable with any of the other models?

LeaF · **Reply #66 on:** March 25, 2016, 01:21:19 PM

Quote from: Paul DeBuhr on March 23, 2016, 05:03:06 PM

Is the glass breaker from the rescue tool interchangeable with any of the other models?

No

anditsgone · **Reply #67 on:** March 27, 2016, 01:01:09 PM

I have also been looking for a 111mm sak but couldn't find one with the toolset that i wanted.

The tools it should at least have are:
OHO blade like rangergrip and OHO trekker with lock and no serrations.
scissors
Philhps screwdriver
flathead screwdriver

I could not find one with those tools, do you guys know if there is a 111mm with those tools?

Luna Knife · **Reply #68 on:** March 27, 2016, 02:35:21 PM

Quote from: anditsgone on March 27, 2016, 01:01:09 PM

I have also been looking for a 111mm sak but couldn't find one with the toolset that i wanted.

The tools it should at least have are:
OHO blade like rangergrip and OHO trekker with lock and no serrations.
scissors
Philhps screwdriver
flathead screwdriver

I could not find one with those tools, do you guys know if there is a 111mm with those tools?

They should make one like that. It would be a good seller

Grass · **Reply #69 on:** March 28, 2016, 12:40:42 AM

Quote from: anditsgone on March 27, 2016, 01:01:09 PM

I have also been looking for a 111mm sak but couldn't find one with the toolset that i wanted.

The tools it should at least have are:
OHO blade like rangergrip and OHO trekker with lock and no serrations.
scissors
Philhps screwdriver
flathead screwdriver

I could not find one with those tools, do you guys know if there is a 111mm with those tools?

Was thinking last night that this is exactly what I want! It must happen!

Essentially a one handed trekker non-serrated that removes the saw and replaces it with scissors and an inline Philips! (Whether it then has two different Philips OR puts the corkscrew on the back, I don't mind!).

Ie a 3 layer with:
One handed non serrated liner lock blade
Scissors
Inline Philips
Can opener-screwdriver
Bottle opener-screwdriver with liner lock
Awl on back
Philips OR corkscrew on back
Toothpick and tweezers

Has anyone made one?

I've seen a mod that seems to add scissors to the trekker; but then it's getting big...

anditsgone · **Reply #70 on:** March 28, 2016, 01:50:57 PM

Yeah, i really like the concept behind the 111mm but the tool set is just not that good. They have to look at their SAK's and see which models sell really wel like climber and spartan and just put those best selling tool load outs in their 111mm.

I agree that the tool load out hinders the 111mm in becomming a big succes.

gene stoner · **Reply #71 on:** March 29, 2016, 04:00:44 PM

Witch saw would you use?

ToolJoe · **Reply #72 on:** March 29, 2016, 05:42:34 PM

The Soldier saw gets my vote..

sLaughterMed · **Reply #73 on:** March 29, 2016, 07:03:22 PM

I never noticed that the OH Soldier and Trekker had different saw blades. Why is that?

gene stoner · **Reply #74 on:** March 29, 2016, 07:42:12 PM

$:-\$

Quote from: sLaughterMed on March 29, 2016, 07:03:22 PM

I never noticed that the OH Soldier and Trekker had different saw blades. Why is that?

The camo one is a Hunter not a Trekker. The slide lock 111mm saw is different from the line lock.

sLaughterMed · **Reply #75 on:** March 29, 2016, 09:27:49 PM

Quote from: gene stoner on March 29, 2016, 07:42:12 PM

$:-\$
Quote from: sLaughterMed on March 29, 2016, 07:03:22 PM
I never noticed that the OH Soldier and Trekker had different saw blades. Why is that?

The camo one is a Hunter not a Trekker. The slide lock 111mm saw is different from the line lock.

my mistake. Neat information to know, i guess you learn a little more every day

emu · **Reply #76 on:** April 09, 2016, 06:06:59 PM

I have a couple, and I love them. But to me, they're strictly special-use/outdoor knives, too big (and to some, scary) for indoor/urban EDC. I keep one with a belt-cutter blade in my car, and if I'm on a sailboat, same kind in my pocket with a 18-inch lanyard connected to my belt (can cut it loose if required). I carry a Trekker-type hiking or camping ... best pocket wood saw.

Gryffin · **Reply #77 on:** April 09, 2016, 11:40:24 PM

I like the Eleventy-Ones as a more knife-focused alternative to a multitool on my belt, especially the one-hand locking-blade models. You do give up some MT functionality though.

(Although, I'm still considering having one of our local SAK surgeons build me my dream Eleventy-One, the One-Hand Workchamp! Now, THAT would be worth carrying instead of a multitool.)

SAK Guy · **Reply #78 on:** June 10, 2016, 04:47:51 PM

Finally Took the plunge and got a Work Champ....it was the custom OD scales that pushed me over!

CVW OD Work Champ

toolguy · **Reply #79 on:** June 10, 2016, 08:28:57 PM

Quote from: gene stoner on March 29, 2016, 07:42:12 PM

$:-\$
Quote from: sLaughterMed on March 29, 2016, 07:03:22 PM
I never noticed that the OH Soldier and Trekker had different saw blades. Why is that?

The camo one is a Hunter not a Trekker. The slide lock 111mm saw is different from the line lock.

Is that a scale swap ?

I've never seen the Hunter offered in camouflage.

Thanks.

gene stoner · **Reply #80 on:** June 11, 2016, 02:44:38 PM

Quote from: toolguy on June 10, 2016, 08:28:57 PM

Quote from: gene stoner on March 29, 2016, 07:42:12 PM
$:-\$
Quote from: sLaughterMed on March 29, 2016, 07:03:22 PM
I never noticed that the OH Soldier and Trekker had different saw blades. Why is that?

The camo one is a Hunter not a Trekker. The slide lock 111mm saw is different from the line lock.

Is that a scale swap ?

I've never seen the Hunter offered in camouflage.

Thanks.

They where made in 2008 and they came with Phillips driver instead of CS.

SAK Guy · **Reply #81 on:** June 11, 2016, 03:12:30 PM

Quote from: gene stoner on June 11, 2016, 02:44:38 PM

Quote from: toolguy on June 10, 2016, 08:28:57 PM
Quote from: gene stoner on March 29, 2016, 07:42:12 PM
$:-\$
Quote from: sLaughterMed on March 29, 2016, 07:03:22 PM
I never noticed that the OH Soldier and Trekker had different saw blades. Why is that?

The camo one is a Hunter not a Trekker. The slide lock 111mm saw is different from the line lock.

Is that a scale swap ?

I've never seen the Hunter offered in camouflage.

Thanks.

They where made in 2008 and they came with Phillips driver instead of CS.

And I put it off till I missed out on them......

gene stoner · **Reply #82 on:** June 11, 2016, 03:21:28 PM

Quote from: SAK Guy on June 11, 2016, 03:12:30 PM

Quote from: gene stoner on June 11, 2016, 02:44:38 PM
Quote from: toolguy on June 10, 2016, 08:28:57 PM
Quote from: gene stoner on March 29, 2016, 07:42:12 PM
$:-\$
Quote from: sLaughterMed on March 29, 2016, 07:03:22 PM
I never noticed that the OH Soldier and Trekker had different saw blades. Why is that?

The camo one is a Hunter not a Trekker. The slide lock 111mm saw is different from the line lock.

Is that a scale swap ?

I've never seen the Hunter offered in camouflage.

Thanks.

They where made in 2008 and they came with Phillips driver instead of CS.

And I put it off till I missed out on them......

If I find an other one I'll let you know SG.

SAK Guy · **Reply #83 on:** June 11, 2016, 05:46:06 PM

Quote from: gene stoner on June 11, 2016, 03:21:28 PM

Quote from: SAK Guy on June 11, 2016, 03:12:30 PM
Quote from: gene stoner on June 11, 2016, 02:44:38 PM
Quote from: toolguy on June 10, 2016, 08:28:57 PM
Quote from: gene stoner on March 29, 2016, 07:42:12 PM
$:-\$
Quote from: sLaughterMed on March 29, 2016, 07:03:22 PM
I never noticed that the OH Soldier and Trekker had different saw blades. Why is that?

The camo one is a Hunter not a Trekker. The slide lock 111mm saw is different from the line lock.

Is that a scale swap ?

I've never seen the Hunter offered in camouflage.

Thanks.

They where made in 2008 and they came with Phillips driver instead of CS.

And I put it off till I missed out on them......

If I find an other one I'll let you know SG.

Thanks Gene!!!!

Gath · **Reply #84 on:** June 22, 2016, 08:55:53 PM

A RescueTool joined my humble 111mm SAK collection, though it was destined and delivered to my brother who is a nurse and red cross member and drives a lot. I hope he likes it but never needs the unique functions.

WoodsDuck · **Reply #85 on:** June 22, 2016, 10:53:05 PM

Quote from: Gath on June 22, 2016, 08:55:53 PM

A RescueTool joined my humble 111mm SAK collection, though it was destined and delivered to my brother who is a nurse and red cross member and drives a lot. I hope he likes it but never needs the unique functions.

Now that is a nice gift