Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Highlander: There can be only one...restoration

kirk13 · 40 · 2594
« previous next »
Pages: 1 2   Go Down

00 Offline kirk13

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,281
Highlander: There can be only one...restoration
on: September 03, 2015, 02:13:54 AM
So...

I took a punt on a Wenger Highlander on a U.S. Auction on eBay,and picked it up for about £12 delivered to me in the UK.

It arrived yesterday morning safely,but the poor thing was in a very poor state. Blunt as the proverbial blunt object,iffy to poor snap on the tools,and serious vertical movement on the nail file.

It's been through a hot soapy bath overnight,followed by a day long WD40 sauna. The snap on the opener layer improved no end,but the knife layer was still iffy. Not much gunk came out of the little fella,despite me cleaning into the nooks and crannies.

I popped the battered scales off for a closer look.

At some point,the Phillips has seriously over torqued a screw,and bent the liners! That explained the lose nail file! The knife has spent some quality time in my vice,which has given the blade back a good degree of snap,but the nail file is still showing too much movement,albeit half of what it was. I'm going to have a go at re-peening the pivot(this being the older,pre brushing type), and see if that will help.

Pics still to come
There is no beginning,or ending,and for this we are thankful,cos now is hard enough to understand!
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of a Japanese made PST in your collection

us Offline NKlamerus

  • No Life Club
  • ******
    • Posts: 4,756
  • Captain's Apprentice
Re: Highlander: There can be only one...restoration
Reply #1 on: September 03, 2015, 04:05:08 AM
"Blunt as the proverbial blunt object"

 Now that's a quote for the quote thread if I do say so myself.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

gb Offline Zed

  • *
  • Zombie Apprentice
  • ********
    • Posts: 19,555
Re: Highlander: There can be only one...restoration
Reply #2 on: September 03, 2015, 04:59:14 AM
And there was me about too dig out my Duncan McLeod sword from down the side of my wardrobe  :D
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread with photos of your Mora knives in use Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

00 Offline kirk13

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,281
Re: Highlander: There can be only one...restoration
Reply #3 on: September 03, 2015, 11:26:04 PM
Quote from: NKlamerus on September 03, 2015, 04:05:08 AM
"Blunt as the proverbial blunt object"

 Now that's a quote for the quote thread if I do say so myself.

Feel free  :D

Quote from: Zed on September 03, 2015, 04:59:14 AM
And there was me about too dig out my Duncan McLeod sword from down the side of my wardrobe  :D

Oh Paul,don't loose your head :rofl:
There is no beginning,or ending,and for this we are thankful,cos now is hard enough to understand!
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of a Japanese made PST in your collection

00 Offline kirk13

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,281
Re: Highlander: There can be only one...restoration
Reply #4 on: September 03, 2015, 11:30:09 PM
Here's the blunt object. Once I've cured the back spring issue,this will get a new edge ground on to it



« Last Edit: September 03, 2015, 11:32:41 PM by kirk13 »
There is no beginning,or ending,and for this we are thankful,cos now is hard enough to understand!
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of a Japanese made PST in your collection

00 Offline kirk13

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,281
Re: Highlander: There can be only one...restoration
Reply #5 on: September 03, 2015, 11:38:15 PM
I Got the peening hammer on the go at breakfast time this morning,and I gave to say that having a go at the backtool pivot helped,but here you can see the slack on the nail file

 

Or the slack on the Phillips if the nail file is held in place

« Last Edit: September 03, 2015, 11:39:56 PM by kirk13 »
There is no beginning,or ending,and for this we are thankful,cos now is hard enough to understand!
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of a Japanese made PST in your collection

00 Offline kirk13

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,281
Re: Highlander: There can be only one...restoration
Reply #6 on: September 03, 2015, 11:42:09 PM
On reflection,and considering the distortion there was to the outer liner,I'm now thinking the pivot itself is likely bent. The current plan is to knock it out and replace it.
There is no beginning,or ending,and for this we are thankful,cos now is hard enough to understand!
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of a Japanese made PST in your collection

gb Offline AimlessWanderer

  • *
  • Zombie Apprentice
  • ********
    • Posts: 17,517
  • I'm not a pessimist, I'm an experienced optimist!
Re: Highlander: There can be only one...restoration
Reply #7 on: September 04, 2015, 01:40:41 AM
If it's an older Wenger, there's a possibility it may be a sprained backspring. I've just done a Wenger mod so might have a suitable spare if replacing the pin doesn't retension it


The cantankerous but occasionally useful member, formally known as 50ft-trad

scotland Offline Gareth

  • Admin Team
  • Point Of No Return
  • *
    • Posts: 36,690
Re: Highlander: There can be only one...restoration
Reply #8 on: September 04, 2015, 01:47:30 AM
Quote from: kirk13 on September 03, 2015, 11:42:09 PM
On reflection,and considering the distortion there was to the outer liner,I'm now thinking the pivot itself is likely bent. The current plan is to knock it out and replace it.

If not the pivot then have a look at the pivot hole in the liners.  Good chance they've become less than perfectly round.
Be excellent to each other and always know where your towel is.
Merit Badges Participate  in Challenge thread and post a photo of a Delemont SAK for thirty (30) consecutive days. Must start a thread with a photo of your birth year SAK Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with a photo showing the axe in use Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns) Must have a review written in the proper format and posted on the Main Site Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread with a photo of your custom ALOX with scissors Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking

00 Offline kirk13

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,281
Re: Highlander: There can be only one...restoration
Reply #9 on: September 04, 2015, 09:41:08 AM
Quote from: 50ft-trad on September 04, 2015, 01:40:41 AM
If it's an older Wenger, there's a possibility it may be a sprained backspring. I've just done a Wenger mod so might have a suitable spare if replacing the pin doesn't retension it

You might well be right Al. This one predates the locking cap lifter.


Quote from: Gareth on September 04, 2015, 01:47:30 AM

If not the pivot then have a look at the pivot hole in the liners.  Good chance they've become less than perfectly round.

I had wondered about that Gareth,but I'm not wanting to consider the possibility yet ;)
There is no beginning,or ending,and for this we are thankful,cos now is hard enough to understand!
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of a Japanese made PST in your collection

gb Offline Zed

  • *
  • Zombie Apprentice
  • ********
    • Posts: 19,555
Re: Highlander: There can be only one...restoration
Reply #10 on: September 04, 2015, 09:49:47 AM
Quote from: kirk13 on September 03, 2015, 11:26:04 PM
Quote from: NKlamerus on September 03, 2015, 04:05:08 AM
"Blunt as the proverbial blunt object"

 Now that's a quote for the quote thread if I do say so myself.

Feel free  :D

Quote from: Zed on September 03, 2015, 04:59:14 AM
And there was me about too dig out my Duncan McLeod sword from down the side of my wardrobe  :D

Oh Paul,don't loose your head :rofl:

who wants too live forever   :duel:
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread with photos of your Mora knives in use Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

00 Offline kirk13

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,281
Re: Highlander: There can be only one...restoration
Reply #11 on: September 05, 2015, 11:17:41 PM
 :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry:

The Highlander is dead. Died on the operating table


 :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry:
There is no beginning,or ending,and for this we are thankful,cos now is hard enough to understand!
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of a Japanese made PST in your collection

scotland Offline Gareth

  • Admin Team
  • Point Of No Return
  • *
    • Posts: 36,690
Re: Highlander: There can be only one...restoration
Reply #12 on: September 05, 2015, 11:19:49 PM
What was the cause of death? :-\
Be excellent to each other and always know where your towel is.
Merit Badges Participate  in Challenge thread and post a photo of a Delemont SAK for thirty (30) consecutive days. Must start a thread with a photo of your birth year SAK Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with a photo showing the axe in use Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns) Must have a review written in the proper format and posted on the Main Site Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread with a photo of your custom ALOX with scissors Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking

gb Offline AimlessWanderer

  • *
  • Zombie Apprentice
  • ********
    • Posts: 17,517
  • I'm not a pessimist, I'm an experienced optimist!
Re: Highlander: There can be only one...restoration
Reply #13 on: September 06, 2015, 02:16:55 AM
+1

Was it Kirkied to death, or was there another cause? Am I likely to have anything that might help revive it?


The cantankerous but occasionally useful member, formally known as 50ft-trad

00 Offline kirk13

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,281
Re: Highlander: There can be only one...restoration
Reply #14 on: September 06, 2015, 07:59:23 AM
Quote from: 50ft-trad on September 06, 2015, 02:16:55 AM
Was it Kirkied to death?

Pretty much this. The stressed liner gave up the ghost trying to extract the pivot. The liner deformed,then cracked.

There's a plan....
There is no beginning,or ending,and for this we are thankful,cos now is hard enough to understand!
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of a Japanese made PST in your collection

gb Offline VoetSak

  • *
  • Sr. Member
  • ****
    • Posts: 370
Re: Highlander: There can be only one...restoration
Reply #15 on: September 06, 2015, 09:48:07 AM
Is it a cunning plan my lord?

Merit Badges Must start a thread with a photo of your birth year SAK Start a new thread with a photo showing the Hook in use Start a new thread with pictures of a Fish Scaler in use Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Must put something in order and provide link to the post. Start a new thread and post a picture of a fish or fishing kit with a multitool Must start a thread with a photo of at least three (3) of your watches Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with a photo of a repair you made with duct tape

gb Offline VoetSak

  • *
  • Sr. Member
  • ****
    • Posts: 370
Re: Highlander: There can be only one...restoration
Reply #16 on: September 06, 2015, 10:38:01 AM
I have this guy....

His scales attatch the correct way and he also has a nice clean blade. Not sure if he would work as he has the later patent push on the combo tool?

Just a suggestion.
979451_150602015852_IMG_0844.JPG
* 979451_150602015852_IMG_0844.JPG (Filesize: 9.43 KB)
Merit Badges Must start a thread with a photo of your birth year SAK Start a new thread with a photo showing the Hook in use Start a new thread with pictures of a Fish Scaler in use Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Must put something in order and provide link to the post. Start a new thread and post a picture of a fish or fishing kit with a multitool Must start a thread with a photo of at least three (3) of your watches Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with a photo of a repair you made with duct tape

cy Offline dks

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 21,692
  • Bored
Re: Highlander: There can be only one...restoration
Reply #17 on: September 06, 2015, 12:07:46 PM
well, we know who is to blame for the death of the highlander....
Kelly: "Daddy, what makes men cheat on women?
Al : "Women!"

[ Knife threads ]  [ Country shopping guides ]  [ Battery-Charger-Light threads ]  [ Picture threads ]
Merit Badges Must start a thread with a photo of your stayglow SAK Start a new thread with photos of your titanium gear with a multitool or sak Test,please ignore For those who posted like a boss. Start a thread with photos of at least twelve different colored ALOX models in your collection Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread showing photos of your outdoor cooking Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns) Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms) Start a thread with photos of at least 1 MTO branded tool in your collection Start a thread with a photo of at least ten OPT's in your collection

gb Offline Zed

  • *
  • Zombie Apprentice
  • ********
    • Posts: 19,555
Re: Highlander: There can be only one...restoration
Reply #18 on: September 06, 2015, 12:32:24 PM
Quote from: dks on September 06, 2015, 12:07:46 PM
well, we know who is to blame for the death of the highlander....

it was duncun McLeod  :D
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread with photos of your Mora knives in use Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

hr Offline styx

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,599
Re: Highlander: There can be only one...restoration
Reply #19 on: September 06, 2015, 01:23:37 PM
Quote from: Zed on September 06, 2015, 12:32:24 PM
Quote from: dks on September 06, 2015, 12:07:46 PM
well, we know who is to blame for the death of the highlander....

it was duncun McLeod  :D

You sure it wasn't Connor?
Solving problems you didn't know you had in the most obscure way possible

"And now, it's time to hand this over to our tame race axe driver. Some say, he can live in the forest for six months at a time without food, and he knows of a secret tribe of only women where he is their God. All we know is, he's call the Styx!" - TazzieRob
Merit Badges Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the axe in use Start a new thread with photos of your Mora knives in use Test,please ignore Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge.

gb Offline Zed

  • *
  • Zombie Apprentice
  • ********
    • Posts: 19,555
Re: Highlander: There can be only one...restoration
Reply #20 on: September 06, 2015, 01:54:11 PM
Quote from: styx on September 06, 2015, 01:23:37 PM
Quote from: Zed on September 06, 2015, 12:32:24 PM
Quote from: dks on September 06, 2015, 12:07:46 PM
well, we know who is to blame for the death of the highlander....

it was duncun McLeod  :D

You sure it wasn't Connor?


no duncan chopped off connors head in the movie Endgame  :tu: he didnt want too but had no choice  :-\
« Last Edit: September 06, 2015, 01:56:02 PM by Zed »
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread with photos of your Mora knives in use Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

gb Offline AimlessWanderer

  • *
  • Zombie Apprentice
  • ********
    • Posts: 17,517
  • I'm not a pessimist, I'm an experienced optimist!
Re: Highlander: There can be only one...restoration
Reply #21 on: September 06, 2015, 06:04:57 PM
Quote from: kirk13 on September 06, 2015, 07:59:23 AM
Quote from: 50ft-trad on September 06, 2015, 02:16:55 AM
Was it Kirkied to death?

Pretty much this. The stressed liner gave up the ghost trying to extract the pivot. The liner deformed,then cracked.

There's a plan....

 :popcorn:


The cantankerous but occasionally useful member, formally known as 50ft-trad

00 Offline Caranthanus

  • *
  • No Life Club
  • ******
    • Posts: 1,775
Re: Highlander: There can be only one...restoration
Reply #22 on: September 06, 2015, 06:24:10 PM
Quote from: Zed on September 06, 2015, 01:54:11 PM
Quote from: styx on September 06, 2015, 01:23:37 PM
Quote from: Zed on September 06, 2015, 12:32:24 PM
Quote from: dks on September 06, 2015, 12:07:46 PM
well, we know who is to blame for the death of the highlander....

it was duncun McLeod  :D

You sure it wasn't Connor?


no duncan chopped off connors head in the movie Endgame  :tu: he didnt want too but had no choice  :-\
:think: ... not sure, but just in case

gb Offline Zed

  • *
  • Zombie Apprentice
  • ********
    • Posts: 19,555
Re: Highlander: There can be only one...restoration
Reply #23 on: September 06, 2015, 06:43:45 PM
Quote from: Caranthanus on September 06, 2015, 06:24:10 PM
Quote from: Zed on September 06, 2015, 01:54:11 PM
Quote from: styx on September 06, 2015, 01:23:37 PM
Quote from: Zed on September 06, 2015, 12:32:24 PM
Quote from: dks on September 06, 2015, 12:07:46 PM
well, we know who is to blame for the death of the highlander....

it was duncun McLeod  :D

You sure it wasn't Connor?


no duncan chopped off connors head in the movie Endgame  :tu: he didnt want too but had no choice  :-\
:think: ... not sure, but just in case (Image removed from quote.)

you need too watch the movie,although its not great,but still better than The source  :facepalm:
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread with photos of your Mora knives in use Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

hr Offline styx

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,599
Re: Highlander: There can be only one...restoration
Reply #24 on: September 06, 2015, 08:49:51 PM
I think that Endgame isn't considered a part of the main continuity so Connor should be alive
Solving problems you didn't know you had in the most obscure way possible

"And now, it's time to hand this over to our tame race axe driver. Some say, he can live in the forest for six months at a time without food, and he knows of a secret tribe of only women where he is their God. All we know is, he's call the Styx!" - TazzieRob
Merit Badges Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the axe in use Start a new thread with photos of your Mora knives in use Test,please ignore Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge.

gb Offline Zed

  • *
  • Zombie Apprentice
  • ********
    • Posts: 19,555
Re: Highlander: There can be only one...restoration
Reply #25 on: September 06, 2015, 09:20:56 PM
Quote from: styx on September 06, 2015, 08:49:51 PM
I think that Endgame isn't considered a part of the main continuity so Connor should be alive

 :think: why is that,its got connor añd duncan in it,its not a great film but better the the source,that was bad  :-\
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread with photos of your Mora knives in use Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

00 Offline kirk13

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,281
Re: Highlander: There can be only one...restoration
Reply #26 on: September 06, 2015, 09:26:18 PM
Quote from: Zed on September 06, 2015, 09:20:56 PM
Quote from: styx on September 06, 2015, 08:49:51 PM
I think that Endgame isn't considered a part of the main continuity so Connor should be alive

 :think: why is that,its got connor añd duncan in it,its not a great film but better the the source,that was bad  :-\

If fairness,being poked in the eye with a sharp stick is better than The Source :think:

But,I'm backing Styx on this one,only because my ex irritated the crap out of me banging on about Duncan :rant:
There is no beginning,or ending,and for this we are thankful,cos now is hard enough to understand!
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of a Japanese made PST in your collection

hr Offline styx

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,599
Re: Highlander: There can be only one...restoration
Reply #27 on: September 06, 2015, 10:04:10 PM
I think we can ignore it like the Indiana Jones 4, Terminator 3, 4, 5 and all others, Rocky 5, Star wars 1, 2 & 3, Batman & Robin
Solving problems you didn't know you had in the most obscure way possible

"And now, it's time to hand this over to our tame race axe driver. Some say, he can live in the forest for six months at a time without food, and he knows of a secret tribe of only women where he is their God. All we know is, he's call the Styx!" - TazzieRob
Merit Badges Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the axe in use Start a new thread with photos of your Mora knives in use Test,please ignore Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge.

gb Offline AimlessWanderer

  • *
  • Zombie Apprentice
  • ********
    • Posts: 17,517
  • I'm not a pessimist, I'm an experienced optimist!
Re: Highlander: There can be only one...restoration
Reply #28 on: September 06, 2015, 10:25:16 PM
But is the knife fixed yet?  :pok:


The cantankerous but occasionally useful member, formally known as 50ft-trad

gb Offline Zed

  • *
  • Zombie Apprentice
  • ********
    • Posts: 19,555
Re: Highlander: There can be only one...restoration
Reply #29 on: September 06, 2015, 10:26:00 PM
Quote from: styx on September 06, 2015, 10:04:10 PM
I think we can ignore it like the Indiana Jones 4, Terminator 3, 4, 5 and all others, Rocky 5, Star wars 1, 2 & 3, Batman & Robin

 :rofl: this is true  :tu:
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread with photos of your Mora knives in use Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

Pages: 1 2   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $122.41
PayPal Fees: $6.85
Net Balance: $115.56
Below Goal: $184.44
Site Currency: USD
39% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal