Compact Appreciation

[Don Pablo]

Very nice pfrsantos.

Just wondering, anyone in europe have a beaten up compact?

Why? So we won't notice when you abuse it?

Drat, they got me! 

Lol, I want a compact with an intact/slightly twisted combo tool, the condition of the rest doesn't matter.

Would a Bantam work? It's a little smaller, but maybe it would solve your problem. It's easier to find.

 

It would, if I didn't need to enlarge the pivot hole of the combo tool. 

[Don Pablo]

Very nice pfrsantos.

Just wondering, anyone in europe have a beaten up compact?

Why? So we won't notice when you abuse it?

Drat, they got me! 

Lol, I want a compact with an intact/slightly twisted combo tool, the condition of the rest doesn't matter.

Take a look at the DofE. It's cheaper than the Compact, and also got the file on the hook. Added bonus might be that the rounded off knife blade is more acceptable for you to carry over there, without fear of people getting the wrong impression

Come on, Al! It's Pablo! No matter what blade or bladeless stuff he carries, people will always get the wrong impression...

 

 

There's an idea Al. 

Lol santos. 

[pfrsantos]

Very nice pfrsantos.

Just wondering, anyone in europe have a beaten up compact?

Why? So we won't notice when you abuse it?

Drat, they got me! 

Lol, I want a compact with an intact/slightly twisted combo tool, the condition of the rest doesn't matter.

Would a Bantam work? It's a little smaller, but maybe it would solve your problem. It's easier to find.

 

It would, if I didn't need to enlarge the pivot hole of the combo tool. 

Can't help you there. Maybe ask syph007 or another modder?...
 

[strmliner]

Very nice pfrsantos.

Just wondering, anyone in europe have a beaten up compact?

Why? So we won't notice when you abuse it?

Drat, they got me! 

Lol, I want a compact with an intact/slightly twisted combo tool, the condition of the rest doesn't matter.

Would a Bantam work? It's a little smaller, but maybe it would solve your problem. It's easier to find.

 

It would, if I didn't need to enlarge the pivot hole of the combo tool. 

You will...I'm doing a Scientist mod now and have to enlarge the current spare combo tool I have to do it, otherwise I'll have to break down one of the parts-Compacts I have.

[Mechanickal]

Very nice pfrsantos.

Just wondering, anyone in europe have a beaten up compact?

Why? So we won't notice when you abuse it?

Drat, they got me! 

Lol, I want a compact with an intact/slightly twisted combo tool, the condition of the rest doesn't matter.

Would a Bantam work? It's a little smaller, but maybe it would solve your problem. It's easier to find.

 

It would, if I didn't need to enlarge the pivot hole of the combo tool. 

You will...I'm doing a Scientist mod now and have to enlarge the current spare combo tool I have to do it, otherwise I'll have to break down one of the parts-Compacts I have.

I'll send you a 84mm tool with combo tool if you like Pablo.
Yes you'll need to drill it out but it's possible.
It's also useable in a 91mm tool but it'll sit a little lower.

Will have to send my only Waiter for it though, but anything for you Pabs

[Don Pablo]

Very nice pfrsantos.

Just wondering, anyone in europe have a beaten up compact?

Why? So we won't notice when you abuse it?

Drat, they got me! 

Lol, I want a compact with an intact/slightly twisted combo tool, the condition of the rest doesn't matter.

Would a Bantam work? It's a little smaller, but maybe it would solve your problem. It's easier to find.

 

It would, if I didn't need to enlarge the pivot hole of the combo tool. 

You will...I'm doing a Scientist mod now and have to enlarge the current spare combo tool I have to do it, otherwise I'll have to break down one of the parts-Compacts I have.

I'll send you a 84mm tool with combo tool if you like Pablo.
Yes you'll need to drill it out but it's possible.
It's also useable in a 91mm tool but it'll sit a little lower.

Will have to send my only Waiter for it though, but anything for you Pabs

Thank you for the extremely generous offer, but no thank you.
I'll buy one on Amazon or find one at the boot sales in good time. 

[Mechanickal]

Very nice pfrsantos.

Just wondering, anyone in europe have a beaten up compact?

Why? So we won't notice when you abuse it?

Drat, they got me! 

Lol, I want a compact with an intact/slightly twisted combo tool, the condition of the rest doesn't matter.

Would a Bantam work? It's a little smaller, but maybe it would solve your problem. It's easier to find.

 

It would, if I didn't need to enlarge the pivot hole of the combo tool. 

You will...I'm doing a Scientist mod now and have to enlarge the current spare combo tool I have to do it, otherwise I'll have to break down one of the parts-Compacts I have.

I'll send you a 84mm tool with combo tool if you like Pablo.
Yes you'll need to drill it out but it's possible.
It's also useable in a 91mm tool but it'll sit a little lower.

Will have to send my only Waiter for it though, but anything for you Pabs

Thank you for the extremely generous offer, but no thank you.
I'll buy one on Amazon or find one at the boot sales in good time. 

Ok, good...

Otherwise I'd have to get my own drinks.

[magentus]

Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?

[Don Pablo]

Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?

Only if yer not going to need it Mags.  

[magentus]

Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?

Only if yer not going to need it Mags.  

Not unless I start appreciating the combo tool, which I won't 

[Don Pablo]

Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?

Only if yer not going to need it Mags.  

Not unless I start appreciating the combo tool, which I won't 

Good point. 
In my particular case, the combo tool is the best of a bad lot.

[El Corkscrew]

Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?

Only if yer not going to need it Mags.  

Not unless I start appreciating the combo tool, which I won't 

Have you tried opening a can of beans with it? after a hard day at work? It's like greased lightning ⚡

[magentus]

Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?

Only if yer not going to need it Mags.  

Not unless I start appreciating the combo tool, which I won't 

Good point. 
In my particular case, the combo tool is the best of a bad lot.

Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.

The only limit is your imagination. Get set, GO!

[magentus]

Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?

Only if yer not going to need it Mags.  

Not unless I start appreciating the combo tool, which I won't 

Have you tried opening a can of beans with it? after a hard day at work? It's like greased lightning ⚡

I will give it a try for me beans on toast (keep hearing your Ross accent when I say that  )

[Don Pablo]

Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?

Only if yer not going to need it Mags.  

Not unless I start appreciating the combo tool, which I won't 

Good point. 
In my particular case, the combo tool is the best of a bad lot.

Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.

The only limit is your imagination. Get set, GO!

How would you feel about the combo tool if it was made of the most twist resistant Ti alloy possible? 

[Don Pablo]

Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?

Only if yer not going to need it Mags.  

Not unless I start appreciating the combo tool, which I won't 

Have you tried opening a can of beans with it? after a hard day at work? It's like greased lightning ⚡

I will give it a try for me beans on toast (keep hearing your Ross accent when I say that  )

Now you're making me want the combo tool baad, just to try opening a can with it. 

[magentus]

Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?

Only if yer not going to need it Mags.  

Not unless I start appreciating the combo tool, which I won't 

Good point. 
In my particular case, the combo tool is the best of a bad lot.

Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.

The only limit is your imagination. Get set, GO!

How would you feel about the combo tool if it was made of the most twist resistant Ti alloy possible? 

If you could guarantee it wouldn't twist even if I attempted to prise open the lid of my U Boat at a depth of 20 leagues.

[Don Pablo]

Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?

Only if yer not going to need it Mags.  

Not unless I start appreciating the combo tool, which I won't 

Good point. 
In my particular case, the combo tool is the best of a bad lot.

Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.

The only limit is your imagination. Get set, GO!

How would you feel about the combo tool if it was made of the most twist resistant Ti alloy possible? 

If you could guarantee it wouldn't twist even if I attempted to prise open the lid of my U Boat at a depth of 20 leagues.

Why on gods green earth are you inside the mantle? 
And who's your Internet provider? If they can give you an internet connection when you're in the mantle, I'm signing up to them.

[Mechanickal]

Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?

Only if yer not going to need it Mags.  

Not unless I start appreciating the combo tool, which I won't 

Good point. 
In my particular case, the combo tool is the best of a bad lot.

Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.

The only limit is your imagination. Get set, GO!

How would you feel about the combo tool if it was made of the most twist resistant Ti alloy possible? 

If you could guarantee it wouldn't twist even if I attempted to prise open the lid of my U Boat at a depth of 20 leagues.

We guarantee!

Now go and try!

[magentus]

Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?

Only if yer not going to need it Mags.  

Not unless I start appreciating the combo tool, which I won't 

Good point. 
In my particular case, the combo tool is the best of a bad lot.

Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.

The only limit is your imagination. Get set, GO!

How would you feel about the combo tool if it was made of the most twist resistant Ti alloy possible? 

If you could guarantee it wouldn't twist even if I attempted to prise open the lid of my U Boat at a depth of 20 leagues.

Why on gods green earth are you inside the mantle? 
And who's your Internet provider? If they can give you an internet connection when you're in the mantle, I'm signing up to them.

We can only get wifi in Torpedo tube 2

[magentus]

Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?

Only if yer not going to need it Mags.  

Not unless I start appreciating the combo tool, which I won't 

Good point. 
In my particular case, the combo tool is the best of a bad lot.

Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.

The only limit is your imagination. Get set, GO!

How would you feel about the combo tool if it was made of the most twist resistant Ti alloy possible? 

If you could guarantee it wouldn't twist even if I attempted to prise open the lid of my U Boat at a depth of 20 leagues.

We guarantee!

Now go and try!

OK, here goes noth gluggggggggggggggggggggg

[Don Pablo]

Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?

Only if yer not going to need it Mags.  

Not unless I start appreciating the combo tool, which I won't 

Good point. 
In my particular case, the combo tool is the best of a bad lot.

Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.

The only limit is your imagination. Get set, GO!

How would you feel about the combo tool if it was made of the most twist resistant Ti alloy possible? 

If you could guarantee it wouldn't twist even if I attempted to prise open the lid of my U Boat at a depth of 20 leagues.

We guarantee!

Now go and try!

OK, here goes noth gluggggggggggggggggggggg

MAGS!!!!!!!! 

[an0nemus]

Yes! A groupmate over at our local Facebook group has a Golfer and he agreed to trade with a Wenger pouch I have. Pics he sent. Scissors need spring and scales need replacement but it looks good

[classicrock]

Love the Compact, perfect two layers SAK for me.

Sent from my A37f using Tapatalk

[jaya_man]

Yes! A groupmate over at our local Facebook group has a Golfer and he agreed to trade with a Wenger pouch I have. Pics he sent. Scissors need spring and scales need replacement but it looks good



(Image removed from quote.)(Image removed from quote.)

84mm Golfer... scales you can find... springs might be tough though


Sent from my iPhone using Tapatalk

[ironraven]

Yes! A groupmate over at our local Facebook group has a Golfer and he agreed to trade with a Wenger pouch I have.

Killer deal.

I've got some beach front property in Arizona if he's interested.

[an0nemus]

Yes! A groupmate over at our local Facebook group has a Golfer and he agreed to trade with a Wenger pouch I have. Pics he sent. Scissors need spring and scales need replacement but it looks good

(Image removed from quote.)

(Image removed from quote.)(Image removed from quote.)

84mm Golfer... scales you can find... springs might be tough though


Sent from my iPhone using Tapatalk

Opps. Im not sure if he has the 91mm or 84mm version? I'll be getting it in a few hours. Is he holding an 84mm? Is the scissor springs different on 84 and 91mm SAKs? 

http://www.sakwiki.com/ti...ndex.php?page=Golfer+91mm
http://www.sakwiki.com/ti...ndex.php?page=Golfer+84mm

[an0nemus]

Yes! A groupmate over at our local Facebook group has a Golfer and he agreed to trade with a Wenger pouch I have.

Killer deal.

I've got some beach front property in Arizona if he's interested.

My groupmate actually gets his stuff from the TSA 

[jaya_man]

Yes! A groupmate over at our local Facebook group has a Golfer and he agreed to trade with a Wenger pouch I have. Pics he sent. Scissors need spring and scales need replacement but it looks good

(Image removed from quote.)

(Image removed from quote.)(Image removed from quote.)

84mm Golfer... scales you can find... springs might be tough though


Sent from my iPhone using Tapatalk

Opps. Im not sure if he has the 91mm or 84mm version? I'll be getting it in a few hours. Is he holding an 84mm? Is the scissor springs different on 84 and 91mm SAKs? 

http://www.sakwiki.com/ti...ndex.php?page=Golfer+91mm
http://www.sakwiki.com/ti...ndex.php?page=Golfer+84mm

But I could be wrong... from the picture angle, the backtool pivot seems closer to the Shield... Either way, Golfer is a nice score...


Sent from my iPhone using Tapatalk

[pfrsantos]

Yes! A groupmate over at our local Facebook group has a Golfer and he agreed to trade with a Wenger pouch I have. Pics he sent. Scissors need spring and scales need replacement but it looks good

(Image removed from quote.)

(Image removed from quote.)(Image removed from quote.)

84mm Golfer... scales you can find... springs might be tough though


Sent from my iPhone using Tapatalk

Opps. Im not sure if he has the 91mm or 84mm version? I'll be getting it in a few hours. Is he holding an 84mm? Is the scissor springs different on 84 and 91mm SAKs? 

http://www.sakwiki.com/ti...ndex.php?page=Golfer+91mm
http://www.sakwiki.com/ti...ndex.php?page=Golfer+84mm

I think it just needs the scissors spring, not the back spring for the scissors. That won't be too hard to get, I think.