What Is Your Latest Knife?

[Aloha]

Got the Lionsteel M3 a little over a week ago, and I had to turn around and buy the M5. Now I'm up to four:

(Image removed from quote.)

The top two are a DPX Gear Heft 4 and Heft 6 which are made by Lionsteel.

I think I like the wood handle on the M3 (middle) better than the G10 of the M5 (bottom). Although the M5's handle is nicely made. Not overly aggressive, but plenty of grip, IMO.

The wood handle of the M3 is quite stunning but I like the blade profile of the M5 for some reason.  Not that I'd complain at either mind you.  The whole group are pretty fantastic. 

[powernoodle]

Spyderco Pacific Salt SE.  I bought this knife during the Wave Challenge, and finally get to carry it.  For EDC cutting, I still rely on an MT or SAK.  The Pacific Salt serves as a quicker-deployment emergency blade: clothes caught in machinery, pit bull clamped on my leg, seatbelt extraction, etc. Which means it may never get used, but I'm cool with that.  It still looks pretty in my pocket, and the blade will always be sharp. 

[Aloha]

Lovely lovely knife.  I am smitten with Spyderco serrations. 

[ThePeacent]

Spyderco Pacific Salt SE.  I bought this knife during the Wave Challenge, and finally get to carry it.  For EDC cutting, I still rely on an MT or SAK.  The Pacific Salt serves as a quicker-deployment emergency blade: clothes caught in machinery, pit bull clamped on my leg, seatbelt extraction, etc. Which means it may never get used, but I'm cool with that.  It still looks pretty in my pocket, and the blade will always be sharp. 

I can tell you you're gonna enjoy it. I use mine daily and it has yet to fail me!





It is also easier to sharpen than it looks, and the steel is very forgiving. Use it, a lot, and you will find how truly amazing and unique it is. H1 rocks!





You can also "Wave" it using zip-ties or other methods for even faster deployment, if that matters to you!





Have fun!

[Corwyn]

As stated here... I just got my first custom: A puukko with Lauri 95 SS blade, and moose antler, brass, leather, veneer and birch handles.
http://forum.multitool.org/index.php/topic,65545.0.html

[firiki]

Spyderco Pacific Salt SE.  I bought this knife during the Wave Challenge, and finally get to carry it.  For EDC cutting, I still rely on an MT or SAK.  The Pacific Salt serves as a quicker-deployment emergency blade: clothes caught in machinery, pit bull clamped on my leg, seatbelt extraction, etc. Which means it may never get used, but I'm cool with that.  It still looks pretty in my pocket, and the blade will always be sharp. 

I can tell you you're gonna enjoy it. I use mine daily and it has yet to fail me!

(Image removed from quote.)

(Image removed from quote.)

It is also easier to sharpen than it looks, and the steel is very forgiving. Use it, a lot, and you will find how truly amazing and unique it is. H1 rocks!

(Image removed from quote.)

(Image removed from quote.)

You can also "Wave" it using zip-ties or other methods for even faster deployment, if that matters to you!

(Image removed from quote.)

(Image removed from quote.)

Have fun!

I'm going to end up wanting one if you keep it up  

[magentus]

As stated here... I just got my first custom: A puukko with Lauri 95 SS blade, and moose antler, brass, leather, veneer and birch handles.
http://forum.multitool.org/index.php/topic,65545.0.html

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

Cor-Wizzle that is a beautiful puukko. Did you choose the design and materials of the handle? Outstanding!

[Corwyn]

As stated here... I just got my first custom: A puukko with Lauri 95 SS blade, and moose antler, brass, leather, veneer and birch handles.
http://forum.multitool.org/index.php/topic,65545.0.html

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

Cor-Wizzle that is a beautiful puukko. Did you choose the design and materials of the handle? Outstanding!

Yap. I chose everything.
Honestly I saw a knife he made before and asked him to make me a similar one, but shorter, cheaper and in SS instead of Carbon 

See here: http://forum.multitool.org/index.php/topic,64581.0.html

PS: The guy also makes some nice fully-custom blades himself... see here:

[eamo]

As stated here... I just got my first custom: A puukko with Lauri 95 SS blade, and moose antler, brass, leather, veneer and birch handles.
http://forum.multitool.org/index.php/topic,65545.0.html

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

very nice 

[SteveC]

As stated here... I just got my first custom: A puukko with Lauri 95 SS blade, and moose antler, brass, leather, veneer and birch handles.
http://forum.multitool.org/index.php/topic,65545.0.html

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

very nice 

+1   what a beauty  !

[shark_za]

I'm going to end up wanting one if you keep it up  

You say it like its a bad thing.




Sent from my iPhone using Tapatalk

[cbl51]

As much as I try to carry only SAK's, someone who knows of my love of small pen knife size pocket knives gifted me this Boker 240. I had one years ago, and gave it to someone who admired it, thinking I would just get another one.  Silly me, I didn't now they had been discontinued. I groused about that and how I missed it.

So, having heard me reflect on how I missed it, this individual gifted me one he had around. Almost new condition.

[Pile Driver]

An old stockman pattern Buck, unsure of age or model. I'm thinking a 301 from the mid 1960s?

/Edit: I believe its a 303 from ~1967 per some research since I first posted

[HarleyXJGuy]

I'm going to end up wanting one if you keep it up  

You say it like its a bad thing.




Sent from my iPhone using Tapatalk

Get one I need to live vicariously until I get around to getting one.

[Smitty44]

Got lucky today,went to Lowe's for brown mulch,and looking around the tool area,saw they were have a close out on case knives,only two left,a bone handled peanut that was $44,for $17,and a yellow handle small sod-buster with CV blade that was $24,for  $11,got both,and with a Military discount I really got lucky.     

[firiki]

I'm going to end up wanting one if you keep it up  

You say it like its a bad thing.




Sent from my iPhone using Tapatalk

Get one I need to live vicariously until I get around to getting one.

It not a bad thing, rather than that the thing is I can't justify owning one because I don't often need a serrated blade and I've already got that need covered with a Soldier 2008, serrated blade on Swisstool and Spirit and a Fireman Plus, I know I won't be EDCing the thing, I can't see that happening!   

Show content

Oh and   

@Harley: Vicariously, eh!  I know the feeling     


How does one go about sharpening those little serrations, anyway?

[magentus]

I'm going to end up wanting one if you keep it up  

You say it like its a bad thing.




Sent from my iPhone using Tapatalk

Get one I need to live vicariously until I get around to getting one.

It not a bad thing, rather than that the thing is I can't justify owning one because I don't often need a serrated blade and I've already got that need covered with a Soldier 2008, serrated blade on Swisstool and Spirit and a Fireman Plus, I know I won't be EDCing the thing, I can't see that happening!   

Show content

Oh and   

@Harley: Vicariously, eh!  I know the feeling     


How does one go about sharpening those little serrations, anyway?

You could get one for me firiki, you know, to make nice? Living on a U Boat is hard on tools, half my storage space is for WD40.

[firiki]

I'm going to end up wanting one if you keep it up  

You say it like its a bad thing.




Sent from my iPhone using Tapatalk

Get one I need to live vicariously until I get around to getting one.

It not a bad thing, rather than that the thing is I can't justify owning one because I don't often need a serrated blade and I've already got that need covered with a Soldier 2008, serrated blade on Swisstool and Spirit and a Fireman Plus, I know I won't be EDCing the thing, I can't see that happening!   

Show content

Oh and   

@Harley: Vicariously, eh!  I know the feeling     


How does one go about sharpening those little serrations, anyway?

You could get one for me firiki, you know, to make nice? Living on a U Boat is hard on tools, half my storage space is for WD40.

firiki... be nice to somebody... ? that's a good one

Are you telling me you practically feed on that stuff, magentus?   

[magentus]

I'm going to end up wanting one if you keep it up  

You say it like its a bad thing.




Sent from my iPhone using Tapatalk

Get one I need to live vicariously until I get around to getting one.

It not a bad thing, rather than that the thing is I can't justify owning one because I don't often need a serrated blade and I've already got that need covered with a Soldier 2008, serrated blade on Swisstool and Spirit and a Fireman Plus, I know I won't be EDCing the thing, I can't see that happening!   

Show content

Oh and   

@Harley: Vicariously, eh!  I know the feeling     


How does one go about sharpening those little serrations, anyway?

You could get one for me firiki, you know, to make nice? Living on a U Boat is hard on tools, half my storage space is for WD40.

firiki... be nice to somebody... ? that's a good one

Are you telling me you practically feed on that stuff, magentus?   

Once the ersatz coffee has run out, followed by tea, stored water, syrup, ketchup and mustard, WD40 is the next best option to dying of thirst. Also, it's handy because you can spray it directly into your mouth. Once you start losing strength though, the button can be difficult to press.

[firiki]

I'm going to end up wanting one if you keep it up  

You say it like its a bad thing.




Sent from my iPhone using Tapatalk

Get one I need to live vicariously until I get around to getting one.

It not a bad thing, rather than that the thing is I can't justify owning one because I don't often need a serrated blade and I've already got that need covered with a Soldier 2008, serrated blade on Swisstool and Spirit and a Fireman Plus, I know I won't be EDCing the thing, I can't see that happening!   

Show content

Oh and   

@Harley: Vicariously, eh!  I know the feeling     


How does one go about sharpening those little serrations, anyway?

You could get one for me firiki, you know, to make nice? Living on a U Boat is hard on tools, half my storage space is for WD40.

firiki... be nice to somebody... ? that's a good one

Are you telling me you practically feed on that stuff, magentus?   

Once the ersatz coffee has run out, followed by tea, stored water, syrup, ketchup and mustard, WD40 is the next best option to dying of thirst. Also, it's handy because you can spray it directly into your mouth. Once you start losing strength though, the button can be difficult to press.

Note to self: I wonder what would it take to dishearten magentus? Devise a little something to find that out 

[magentus]

I'm going to end up wanting one if you keep it up  

You say it like its a bad thing.




Sent from my iPhone using Tapatalk

Get one I need to live vicariously until I get around to getting one.

It not a bad thing, rather than that the thing is I can't justify owning one because I don't often need a serrated blade and I've already got that need covered with a Soldier 2008, serrated blade on Swisstool and Spirit and a Fireman Plus, I know I won't be EDCing the thing, I can't see that happening!   

Show content

Oh and   

@Harley: Vicariously, eh!  I know the feeling     


How does one go about sharpening those little serrations, anyway?

You could get one for me firiki, you know, to make nice? Living on a U Boat is hard on tools, half my storage space is for WD40.

firiki... be nice to somebody... ? that's a good one

Are you telling me you practically feed on that stuff, magentus?   

Once the ersatz coffee has run out, followed by tea, stored water, syrup, ketchup and mustard, WD40 is the next best option to dying of thirst. Also, it's handy because you can spray it directly into your mouth. Once you start losing strength though, the button can be difficult to press.

Note to self: I wonder what would it take to dishearten magentus? Devise a little something to find that out 

You could send me a Swisschamp - I really hate that fish scaler. That would be a serious blow to my well being.

[firiki]

I'm going to end up wanting one if you keep it up  

You say it like its a bad thing.




Sent from my iPhone using Tapatalk

Get one I need to live vicariously until I get around to getting one.

It not a bad thing, rather than that the thing is I can't justify owning one because I don't often need a serrated blade and I've already got that need covered with a Soldier 2008, serrated blade on Swisstool and Spirit and a Fireman Plus, I know I won't be EDCing the thing, I can't see that happening!   

Show content

Oh and   

@Harley: Vicariously, eh!  I know the feeling     


How does one go about sharpening those little serrations, anyway?

You could get one for me firiki, you know, to make nice? Living on a U Boat is hard on tools, half my storage space is for WD40.

firiki... be nice to somebody... ? that's a good one

Are you telling me you practically feed on that stuff, magentus?   

Once the ersatz coffee has run out, followed by tea, stored water, syrup, ketchup and mustard, WD40 is the next best option to dying of thirst. Also, it's handy because you can spray it directly into your mouth. Once you start losing strength though, the button can be difficult to press.

Note to self: I wonder what would it take to dishearten magentus? Devise a little something to find that out 

You could send me a Swisschamp - I really hate that fish scaler. That would be a serious blow to my well being.

Ask and ye shall receive 

[Sazabi]

As much as I try to carry only SAK's, someone who knows of my love of small pen knife size pocket knives gifted me this Boker 240. I had one years ago, and gave it to someone who admired it, thinking I would just get another one.  Silly me, I didn't now they had been discontinued. I groused about that and how I missed it.

So, having heard me reflect on how I missed it, this individual gifted me one he had around. Almost new condition.

(Image removed from quote.)

So pretty.

[magentus]

I'm going to end up wanting one if you keep it up  

You say it like its a bad thing.




Sent from my iPhone using Tapatalk

Get one I need to live vicariously until I get around to getting one.

It not a bad thing, rather than that the thing is I can't justify owning one because I don't often need a serrated blade and I've already got that need covered with a Soldier 2008, serrated blade on Swisstool and Spirit and a Fireman Plus, I know I won't be EDCing the thing, I can't see that happening!   

Show content

Oh and   

@Harley: Vicariously, eh!  I know the feeling     


How does one go about sharpening those little serrations, anyway?

You could get one for me firiki, you know, to make nice? Living on a U Boat is hard on tools, half my storage space is for WD40.

firiki... be nice to somebody... ? that's a good one

Are you telling me you practically feed on that stuff, magentus?   

Once the ersatz coffee has run out, followed by tea, stored water, syrup, ketchup and mustard, WD40 is the next best option to dying of thirst. Also, it's handy because you can spray it directly into your mouth. Once you start losing strength though, the button can be difficult to press.

Note to self: I wonder what would it take to dishearten magentus? Devise a little something to find that out 

You could send me a Swisschamp - I really hate that fish scaler. That would be a serious blow to my well being.

(Image removed from quote.)

Ask and ye shall receive 

See here: http://forum.multitool.org/index.php/topic,42565.msg1251528.html#new

[Alan K.]

CRKT Hunt 'N Fisch

[zoidberg]

[Grathr]

[eamo]

mora companion MG carbon

[SteveC]

What knife is in the second pic  ?

[toolguy]

The variety of knives posted in this thread is quite extraordinary.Congratulations to all of the new owners.

Here is my one of my latest acquisitions.