Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Shop projects

Sparky415 · 590 · 50069
« previous next »
Pages: 1 ... 14 15 16 17 18 ... 20   Go Down

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,118
  • Plumbers Know Their Crap!!
Re: Shop projects
Reply #450 on: August 05, 2018, 12:51:20 AM
Nice little setup. :tu:
JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 67,565
Re: Shop projects
Reply #451 on: August 06, 2018, 01:06:32 AM
Thanks !   :cheers:
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month.

mc Offline Gerhard Gerber

  • No Life Club
  • ******
    • Posts: 3,832
Re: Shop projects
Reply #452 on: August 06, 2018, 11:12:28 AM
I use contact adhesive for making strops, and the 2nd time I load it with polish some part always comes loose  :facepalm: ......any better suggestions?

england Offline Kev D

  • Absolutely No Life Club
  • *******
    • Posts: 8,567
Re: Shop projects
Reply #453 on: August 06, 2018, 11:13:23 AM
Try gorilla glue, I've never had that come apart
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must buy an item through the MTo Store Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Must start a thread with a photo of your EDC watch Start a thread with photos of at least 1 MTO branded tool in your collection Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must put something in order and provide link to the post. Participate in a Challenge thread and post a photo of a Spyderco knife for thirty (30) consecutive days. Start a new thread with photos of camping, including those showing preferred camping equipment Must start a thread with a photo of your stayglow SAK Start a new thread with a photo of your custom ALOX with scissors Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a picture of fire making kit or fire with a multitool Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa.

gb Offline Sparky415

  • Zombie Apprentice
  • ********
    • Posts: 12,996
Re: Shop projects
Reply #454 on: August 06, 2018, 02:51:12 PM
Quote from: Gerhard Gerber on August 06, 2018, 11:12:28 AM
I use contact adhesive for making strops, and the 2nd time I load it with polish some part always comes loose  :facepalm: ......any better suggestions?

I use the same stuff and had no problems

Operator error?   :shrug:

Is your leather clean?
I'm using old belts and gluing down the shiny side, seems to stick ok  :think:

Everything’s adjustable

wales Offline hiraethus

  • Admin Team
  • *
  • Absolutely No Life Club
  • *
    • Posts: 6,965
  • I brake for cake
Re: Shop projects
Reply #455 on: August 06, 2018, 02:54:52 PM
Quote from: Gerhard Gerber on August 06, 2018, 11:12:28 AM
I use contact adhesive for making strops, and the 2nd time I load it with polish some part always comes loose  :facepalm: ......any better suggestions?

Do you coat both surfaces and let it go tacky before sticking them together?  Make sure it's well clamped while it sets too.

I'll bet Sparky's got loads of old smurf heavy things in his garage he uses to weight his down. ;)
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Must update or add a page on SAKWiki Must start a thread showing a photo of at least three BO tools Start a new thread with a photo of your custom ALOX with scissors Start a thread with a photo of a repair you made with duct tape Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK

gb Offline Sparky415

  • Zombie Apprentice
  • ********
    • Posts: 12,996
Re: Shop projects
Reply #456 on: August 06, 2018, 02:57:47 PM
Or bring it along to the UK meet and get Hiraethus to sit on it  :pok:

 :whistle:
Everything’s adjustable

wales Offline hiraethus

  • Admin Team
  • *
  • Absolutely No Life Club
  • *
    • Posts: 6,965
  • I brake for cake
Re: Shop projects
Reply #457 on: August 06, 2018, 03:33:53 PM
 :D
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Must update or add a page on SAKWiki Must start a thread showing a photo of at least three BO tools Start a new thread with a photo of your custom ALOX with scissors Start a thread with a photo of a repair you made with duct tape Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 67,565
Re: Shop projects
Reply #458 on: August 06, 2018, 09:11:28 PM
Put a little stain and poly on it   :tu:



20180806_122529.jpg
* 20180806_122529.jpg (Filesize: 361.51 KB)
20180806_122602.jpg
* 20180806_122602.jpg (Filesize: 376.37 KB)
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month.

hr Offline styx

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,599
Re: Shop projects
Reply #459 on: August 06, 2018, 09:37:50 PM
looks good
Solving problems you didn't know you had in the most obscure way possible

"And now, it's time to hand this over to our tame race axe driver. Some say, he can live in the forest for six months at a time without food, and he knows of a secret tribe of only women where he is their God. All we know is, he's call the Styx!" - TazzieRob
Merit Badges Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the axe in use Start a new thread with photos of your Mora knives in use Test,please ignore Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge.

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,118
  • Plumbers Know Their Crap!!
Re: Shop projects
Reply #460 on: August 13, 2018, 10:16:27 PM
After using my mini pallet/skid to place my watch and sak earlier I fig it was time to make another since I had some sticks doing nothing. So I started and now waiting for the glue to dry..
JR
2131F437-E041-4721-873E-AFD2AA96BF84.jpeg
* 2131F437-E041-4721-873E-AFD2AA96BF84.jpeg (Filesize: 381.66 KB)
0FA3CC8A-6406-4EA2-A428-328C0E14D694.jpeg
* 0FA3CC8A-6406-4EA2-A428-328C0E14D694.jpeg (Filesize: 388.51 KB)
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

nz Offline Syncop8r

  • Absolutely No Life Club
  • *******
    • Posts: 8,763
Re: Shop projects
Reply #461 on: August 13, 2018, 11:15:48 PM
Cute!

gb Offline Sparky415

  • Zombie Apprentice
  • ********
    • Posts: 12,996
Re: Shop projects
Reply #462 on: August 14, 2018, 08:25:39 AM

 :popcorn:
Everything’s adjustable

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,118
  • Plumbers Know Their Crap!!
Re: Shop projects
Reply #463 on: August 14, 2018, 02:49:25 PM
Since the one set dried I had enough to make one more, and ended with “1” extra, but I threw the others together and clamped them before the day was over, so today I can start fresh..
JR
84A7B0C2-677E-48D5-BD6E-2129E1E797C5.jpeg
* 84A7B0C2-677E-48D5-BD6E-2129E1E797C5.jpeg (Filesize: 369.85 KB)
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,118
  • Plumbers Know Their Crap!!
Re: Shop projects
Reply #464 on: August 14, 2018, 11:04:09 PM
Ok, next step.. after that sets then I can do the other side, so maybe in a few hrs, but till then I’ll let gravity run the project :whistle:
JR
DA9C8AE6-32B6-48FA-A167-B35D984AB655.jpeg
* DA9C8AE6-32B6-48FA-A167-B35D984AB655.jpeg (Filesize: 480.15 KB)
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,118
  • Plumbers Know Their Crap!!
Re: Shop projects
Reply #465 on: August 15, 2018, 01:16:36 AM
Ok, side ones ready, now on to the second side, got to let them sit under the redneck clamps for a few, then file the edges and then put some color into them, but that will have to wait till tomorrow..
JR
DEF8B7D1-4BDB-40AE-B81B-719EA1BD5874.jpeg
* DEF8B7D1-4BDB-40AE-B81B-719EA1BD5874.jpeg (Filesize: 405.56 KB)
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

au Offline TazzieRob

  • *
  • No Life Club
  • ******
    • Posts: 1,449
Re: Shop projects
Reply #466 on: August 15, 2018, 02:55:21 AM
Quote from: MadPlumbarian on August 15, 2018, 01:16:36 AM
Ok, side ones ready, now on to the second side, got to let them sit under the redneck clamps for a few, then file the edges and then put some color into them, but that will have to wait till tomorrow..
JR

That's an awesome idea for coasters, no way your glass/mug would get a coaster stuck to the bottom of it with a small amount of spillage unable to hold surface tension
Merit Badges Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with photos of your chainsaws Start a new thread with a photo showing the axe in use Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread and post a picture of a fish or fishing kit with a multitool Must start a thread with a photo of at least three (3) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a flashlight as part of your EDC

nz Offline Syncop8r

  • Absolutely No Life Club
  • *******
    • Posts: 8,763
Re: Shop projects
Reply #467 on: August 15, 2018, 03:28:02 AM
The only downside is you would have to purchase many ice blocks.  ;)

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,118
  • Plumbers Know Their Crap!!
Re: Shop projects
Reply #468 on: August 15, 2018, 10:42:30 PM
Ok, pretty much done, just drying and maybe put a second coat on, other then that done..
JR
753D7BE8-F5B1-4853-9B29-C20B69821580.jpeg
* 753D7BE8-F5B1-4853-9B29-C20B69821580.jpeg (Filesize: 361.13 KB)
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,118
  • Plumbers Know Their Crap!!
Re: Shop projects
Reply #469 on: August 16, 2018, 08:28:56 PM
Anyone want to guess what I’m working on?
JR
CF3B068C-5BB3-42E4-8915-0C5A1B4807F0.jpeg
* CF3B068C-5BB3-42E4-8915-0C5A1B4807F0.jpeg (Filesize: 364.23 KB)
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

gb Offline Sparky415

  • Zombie Apprentice
  • ********
    • Posts: 12,996
Re: Shop projects
Reply #470 on: August 16, 2018, 09:37:14 PM

Darth Vaders ship?

Imperium II - class star destroyer "Avenger" served as a personal cruiser of Darth Vader during the events shown in the forth episode of Saga.  :think:
Everything’s adjustable

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,118
  • Plumbers Know Their Crap!!
Re: Shop projects
Reply #471 on: August 16, 2018, 09:57:33 PM
Very good, I fig that would be a simple quick hour project but that took a good 2+hrs, I’m not to thrilled over it but it was fun, to a point literally, cause those are sharp!
JR
62F57EEE-E4F1-40BA-A328-DE50219A11FA.jpeg
* 62F57EEE-E4F1-40BA-A328-DE50219A11FA.jpeg (Filesize: 275.2 KB)
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,118
  • Plumbers Know Their Crap!!
Re: Shop projects
Reply #472 on: August 16, 2018, 10:01:36 PM
Now I got to figure out which one next? Do I finish all the Star Wars or do I move on to the harder ones?
JR
3143ADB9-7298-4614-A185-B3989CBA9D53.jpeg
* 3143ADB9-7298-4614-A185-B3989CBA9D53.jpeg (Filesize: 284.11 KB)
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

au Offline TazzieRob

  • *
  • No Life Club
  • ******
    • Posts: 1,449
Re: Shop projects
Reply #473 on: August 17, 2018, 12:15:40 AM
Quote from: MadPlumbarian on August 16, 2018, 10:01:36 PM
Now I got to figure out which one next? Do I finish all the Star Wars or do I move on to the harder ones?
JR

I'd finish the Star Wars ones first, but those others look great! The first one I made was the Apollo Lunar Lander
Merit Badges Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with photos of your chainsaws Start a new thread with a photo showing the axe in use Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread and post a picture of a fish or fishing kit with a multitool Must start a thread with a photo of at least three (3) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a flashlight as part of your EDC

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,118
  • Plumbers Know Their Crap!!
Re: Shop projects
Reply #474 on: August 17, 2018, 03:27:01 AM
Quote from: TazzieRob on August 17, 2018, 12:15:40 AM
Quote from: MadPlumbarian on August 16, 2018, 10:01:36 PM
Now I got to figure out which one next? Do I finish all the Star Wars or do I move on to the harder ones?
JR

I'd finish the Star Wars ones first, but those others look great! The first one I made was the Apollo Lunar Lander
Yeah I think I’ll finish the Star Wars,, you like these metal earths? I’ve done a few, I think the first one I did was either the titanic or the scorpion, here’s a pic, sorry not the best..
JR
7A8EEAA1-29B3-4967-9DEC-F93F3B4830D5.jpeg
* 7A8EEAA1-29B3-4967-9DEC-F93F3B4830D5.jpeg (Filesize: 140.95 KB)
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

us Offline David

  • Absolutely No Life Club
  • *******
    • Posts: 7,662
Re: Shop projects
Reply #475 on: August 17, 2018, 03:31:29 AM
Quote from: SteveC on August 04, 2018, 06:58:13 PM
Went looking for a new leather belt for work last week at the thrift store. I lucked out and found a really nice thick leather one. The only thing was it was a size 52"    :o      Well I have a 33" waist so I had to cut it and punch some new holes.

Well what to do with the cut off piece ?


Nice new leather strop  :tu:


 8)    :like:
What? Enablers! Are you serrrrious? Where? I dont see any.
Hold Fast
Merit Badges Start a thread with photos of at least 12 different Juice models in your collection Must buy something on EDCSource Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of either an Axe, MT/Folding knife or Fixed blade (picked at the beginning of challenge) for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a Spyderco knife for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Start a new thread with photos of your Buck knives in use Start a new thread with photos of your slasher/chopper/machete knives in use Start a new thread with a photo showing the axe in use Must start a thread showing a photo of at least eight BO tools Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread with photos of your zip ties in use Start a thread with a photo of a repair you made with duct tape

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,118
  • Plumbers Know Their Crap!!
Re: Shop projects
Reply #476 on: August 18, 2018, 04:15:08 AM
I started it but got about 5 steps into it before something came up, but here’s how it comes, you have to go piece by piece, then fold or shape each, then interconnect each by a very little tab that gets twisted or folded after slid into a small slot on the other piece..
JR
44C6535F-6C32-47AB-AE25-2D5737D10B64.jpeg
* 44C6535F-6C32-47AB-AE25-2D5737D10B64.jpeg (Filesize: 318.83 KB)
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

gb Offline Sparky415

  • Zombie Apprentice
  • ********
    • Posts: 12,996
Re: Shop projects
Reply #477 on: August 18, 2018, 07:52:44 AM

 :popcorn:
Everything’s adjustable

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,118
  • Plumbers Know Their Crap!!
Re: Shop projects
Reply #478 on: August 19, 2018, 12:55:14 AM
Sorry, not far, rough day..
JR
A254B3DD-545A-45D3-B213-98E277243110.jpeg
* A254B3DD-545A-45D3-B213-98E277243110.jpeg (Filesize: 240.09 KB)
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

gb Offline Sparky415

  • Zombie Apprentice
  • ********
    • Posts: 12,996
Re: Shop projects
Reply #479 on: August 19, 2018, 07:20:05 AM

Looks like the wheels have come off  :think:
Everything’s adjustable

Pages: 1 ... 14 15 16 17 18 ... 20   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $122.41
PayPal Fees: $6.85
Net Balance: $115.56
Below Goal: $184.44
Site Currency: USD
39% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal