Parts for Upgrade/Repair Leatherman multitools

[irona]

Hi, I'm very interested in modding my PST, but I have some concern about the tools fitting. Does someone with a digital caliper have the measurements of the thickness (of the area around the pivot hole) of the wave/charge saw, and of the surge saw/file holder. Thanks a ton!

reference Information
Diameter axes:
The diameter of the PST pliers axis - 4.8mm, length 9mm
Diameter pliers axis Wave Original - 4.8mm, length of 14.4 mm
Diameter pliers axis Wave New - 5.5mm, length of 13.3 mm
Diameter pliers axis Blast / Fuse / Kick - 5.5mm, length 16.4 / 14.8 / mm?
Diameter pliers axis ST300 - 5.5mm, the length of 9.5 mm
Diameter pliers axis Surge - 5.5mm, length 15.5mm
The diameter of the PST tool axis - 4.8mm
The diameter of the tool axis Wave Original -4.8 mm, length 13.1 mm
The diameter of the tool axis Wave - 4.8mm
The diameter of the tool axis Blast / Fuse / Kick - 4.8mm, length 16.4 / 14.8 / mm?
The diameter of the tool axis ST300 - 4.8mm
Shaft diameter with tools Surge- 4.8mm, Length 16.7mm

Thickness tools:
Phillips screwdriver Kick / Fuse / Blast - 5mm
Opener Kick / Fuse / Blast / Wave / Charge - 1,87mm
Knife Kick - 1,74mm
Ring Lanyard Kick / Fuse / Blast - 0,77 mm
All the other instruments (approximately) - 2,34-2,36mm

Tools SOG - 1,98mm (except adapter on bits)

Perfect, thank you!

[irona]

You mentioned that you could get new or used parts, how much would it be for a rebar saw?

[vadsoom]

Got my parts today and finished my hack (posted in Mod Squad). Thanks so much Loki!!!!

[loki-mobile]

You mentioned that you could get new or used parts, how much would it be for a rebar saw?

New rebar saw -  $17 (with shipping)
Used in good condition - $12

Отправлено с моего Redmi 3S через Tapatalk

[Nidana]

I need to keep an eye on this for surge small bit holder again in the future. Only just signed up so post count low also.


Sent from my iPad using Tapatalk

[Booba5]

Do you still have any of the Charge knife blades (not serrated)?  I just bought my first Wave and I want to upgrade the knife on it.  I'm in Missouri (USA), if it matters.  Thanks!

[loki-mobile]

Do you still have any of the Charge knife blades (not serrated)?  I just bought my first Wave and I want to upgrade the knife on it.  I'm in Missouri (USA), if it matters.  Thanks!

I have for wave Standart blade (420c), charge TI blade (154cm) or charge TTI blade (s30v)

It's blades for new wave (after 2004)

[Booba5]

Do you still have any of the Charge knife blades (not serrated)?  I just bought my first Wave and I want to upgrade the knife on it.  I'm in Missouri (USA), if it matters.  Thanks!

I have for wave Standart blade (420c), charge TI blade (154cm) or charge TTI blade (s30v)

It's blades for new wave (after 2004)

I can swap out the standard Wave blade (420c) and put the 154cm Charge blade in it's place, right?

[loki-mobile]

Do you still have any of the Charge knife blades (not serrated)?  I just bought my first Wave and I want to upgrade the knife on it.  I'm in Missouri (USA), if it matters.  Thanks!

I have for wave Standart blade (420c), charge TI blade (154cm) or charge TTI blade (s30v)

It's blades for new wave (after 2004)

I can swap out the standard Wave blade (420c) and put the 154cm Charge blade in it's place, right?

Yes

Отправлено с моего Redmi 3S через Tapatalk

[Booba5]

Awesome, how can I message you?  I don't see a way to private message you, I'm new to the site.  I'd like to exchange payment information and give you my shipping address. Thank you!

[loki-mobile]

Awesome, how can I message you?  I don't see a way to private message you, I'm new to the site.  I'd like to exchange payment information and give you my shipping address. Thank you!

You need 5 posts for write to P. M.

Отправлено с моего Redmi 3S через Tapatalk

[Booba5]

Gotcha, 3 down, 2 to go.  I'll go introduce myself and what not, you'll be getting a PM from me shortly!

[hans]

There were parts of upgrade / repair Leatherman multitools ...........................................

Hi,loki-mobile: 
I need below parts. pls offer price. my recipient address in Taiwan !
a. Rebar Pliers
b. Wingman scissors
c. Surge big bits holder

TKS

[loki-mobile]

There were parts of upgrade / repair Leatherman multitools ...........................................

Hi,loki-mobile: 
I need below parts. pls offer price. my recipient address in Taiwan !
a. Rebar Pliers
b. Wingman scissors
c. Surge big bits holder

TKS

Sorry. Rebar Pliers out of stock.
Other parts available
 

[JustinCase]

Any "used" but in good condition Charge 154CM blade or a S30V blade? Also need a Charge Serrated Blade with Hook.

Thanks.

[Nidana]

I'm looking for both small driver and large bit driver adapters for the surge if in stock.


Sent from my iPhone using Tapatalk

[mickeen]

Hi Loki,
I am looking for the small pivoting bit holder from a Leatherman Wave or Charge.  Do you have one?
Mk

[Booba5]

I received my S30v blade today in perfect condition and very quickly!  Thank you!

[loki-mobile]

I'm looking for both small driver and large bit driver adapters for the surge if in stock.


Sent from my iPhone using Tapatalk

Yes small & lage bit driver adapters for surge in stock. Reply to PM

[loki-mobile]

Hi Loki,
I am looking for the small pivoting bit holder from a Leatherman Wave or Charge.  Do you have one?
Mk

Reply to PM (You can have 5 posts on forum for reply to PM)

[Nidana]

Payment sent Loki thank you


Sent from my iPhone using Tapatalk

[animusrien]

Hi. I'd be very interested in picking up a few pieces if you have them available.

2-3 blade exchangers (Surge), 1-2 large bit drivers, 1 small bit driver.

Please let me know, thanks!

[loki-mobile]

Hi. I'd be very interested in picking up a few pieces if you have them available.

2-3 blade exchangers (Surge), 1-2 large bit drivers, 1 small bit driver.

Please let me know, thanks!

Blade exchanger = Saw/file holder?

[benjigoh]

Hi Loki,  just got my Wave a couple of days ago and my friend intro the forum to me. Its so poisonous and I am already looking to mod my Wave. Understand that I need 5 post to do Pm so I kinda posting now to clock the 5. Will you be able to advise me on what are the items u currently have? Thanks.

[loki-mobile]

Hi Loki,  just got my Wave a couple of days ago and my friend intro the forum to me. Its so poisonous and I am already looking to mod my Wave. Understand that I need 5 post to do Pm so I kinda posting now to clock the 5. Will you be able to advise me on what are the items u currently have? Thanks.

Current availability:
Price includes shipping worldwide.

Pliers:
ST300/NEW Surge/MUT Pliers - $35 (3 new)
MUT Black Pliers - $38 (2 new)
Blast/Fuse/Wave/Charge Ti Pliers - $35 (5 new)
Charge TTi/Blast/Fuse/Wave Pliers - $35 (5 new)
Skeletool/Freestyle pliers - $30 (4 new)
Charge ALX Black - $38 (1 new)
ST300/New Surge CC Black - $38 (2 new)

Blades:
Wave - $17 (3 new)
Charge Ti/Al/ALX (154CM) - $20 (5 new)
Charge ALX black (154CM) - $25 (2 new)
Charge TTi (S30V) - $25 (10 new)
Charge TTi/XTi/ALX Serrated Blade with Hook - $25 (10 new)
Skeletool/Freestyle (420) - $17 (10 new)
Skeletool/Freestyle (154CM) - $21 (5 new)
Skeletool/Freestyle (Combo 154CM) - $25 (1 new)
Surge - $22 (3 new)
Surge serrated - $22 (3 new)
MUT black - $27 (1 new)
ST300 EOD Semiserrated blade - $28
ST300 Black blade (not new, but excellent condition) - $19
ST300 blade - $18
Blast/Fuse blade - $19


Other:
Wave/Charge saw - $17 (3 new)
Wave/Charge file - $17 (7 new)
Blast/Fuse File - $19
Blast Saw - $19
Wave/Charge big bits holder - $12 (10 new)
Wave/Charge/Blast small bits holder - $12 (20 new)
Wave/Charge/Blast/Rebar flat screwdriver - $12 (20 new)
Wave/Charge/Blast/Rebar flat screwdriver black - $14 (10 new)
Blast/Fuse small flat screwdriver - $12 (5 new)
Rebar small flat screwdriver - $12 (3 new)
Wave/Charge/Blast/Rebar opener - $10 (10 new)
Wave/Charge/Blast/Fuse scissors - $15 (20 new)
Blast/Fuse/Kick phillips screwdriver - $15 (1 new)
Rebar awl - $12 (4 new)
Surge/ST300 awl - $12 (3 new)
Surge/ST300 awl black - $14 (3 new)
Surge big bits holder - $17 (2 new)
Surge small bits holder - $17 (5 new)
Surge saw/file holder - $22 (7 new)
Surge saw/file holder black - $24 (4 new)
Surge scissors - $28 (10 new)
Surge scissors black - $30 (1 new)
Surge/ST300 small flat screwdriver - $12 (5 new)
Surge/ST300 small flat screwdriver black - $14 (3 new)
Surge/ST300 big flat screwdriver - $12 (2 new)
Surge/ST300 big flat screwdriver black - $14 (2new)
MUT saw - $25 (1 new)
ST300 saw holder - $45 (2 new) High price, picked to try & my progect
Wingman  scissors - $19 (3 new) High price, picked to try & my progect
Kick Pocket Clip - $20

[benjigoh]

Hi Loki,

Thanks for the update. Will contact you shortly. Cheers

[Nidana]

Parts arrived today many thanks.


Sent from my iPhone using Tapatalk

[AlphaTea]

Hello all!
This is my first post. I am glad I found this forum, I have a Charge XTi that I want to mod.
I want to remove one of the bit holders and replace it with the scissors from a Charge TTi.
Also I need to replace my file because the diamond side a gone too smooth to work.
What tools will I need?
Thanks in advance

[JustinCase]

Hello all!
This is my first post. I am glad I found this forum, I have a Charge XTi that I want to mod.
I want to remove one of the bit holders and replace it with the scissors from a Charge TTi.
Also I need to replace my file because the diamond side a gone too smooth to work.
What tools will I need?
Thanks in advance

[loki-mobile]

Hello all!
This is my first post. I am glad I found this forum, I have a Charge XTi that I want to mod.
I want to remove one of the bit holders and replace it with the scissors from a Charge TTi.
Also I need to replace my file because the diamond side a gone too smooth to work.
What tools will I need?
Thanks in advance

You will need bits for disassemble tool (TT10), wave/charge scissors, wave/charge file, wave/charge flat screwdriver or rebar awl, washer. Large bit holder thickness in more than twice the standard tool.