Quote from: loki-mobile on January 19, 2017, 12:03:15 PMQuote from: irona on January 16, 2017, 07:52:11 AMHi, I'm very interested in modding my PST, but I have some concern about the tools fitting. Does someone with a digital caliper have the measurements of the thickness (of the area around the pivot hole) of the wave/charge saw, and of the surge saw/file holder. Thanks a ton!reference InformationDiameter axes:The diameter of the PST pliers axis - 4.8mm, length 9mmDiameter pliers axis Wave Original - 4.8mm, length of 14.4 mmDiameter pliers axis Wave New - 5.5mm, length of 13.3 mmDiameter pliers axis Blast / Fuse / Kick - 5.5mm, length 16.4 / 14.8 / mm?Diameter pliers axis ST300 - 5.5mm, the length of 9.5 mmDiameter pliers axis Surge - 5.5mm, length 15.5mmThe diameter of the PST tool axis - 4.8mmThe diameter of the tool axis Wave Original -4.8 mm, length 13.1 mmThe diameter of the tool axis Wave - 4.8mmThe diameter of the tool axis Blast / Fuse / Kick - 4.8mm, length 16.4 / 14.8 / mm?The diameter of the tool axis ST300 - 4.8mmShaft diameter with tools Surge- 4.8mm, Length 16.7mmThickness tools:Phillips screwdriver Kick / Fuse / Blast - 5mmOpener Kick / Fuse / Blast / Wave / Charge - 1,87mmKnife Kick - 1,74mmRing Lanyard Kick / Fuse / Blast - 0,77 mmAll the other instruments (approximately) - 2,34-2,36mmTools SOG - 1,98mm (except adapter on bits)Hi Loki,Just curious, do you have any of these axis items available as a spare part? I'd be in the market for a Wave plier-side pivot/axis. Thanks in advance!Sent on my SM-G930F with Tapatalk
Quote from: irona on January 16, 2017, 07:52:11 AMHi, I'm very interested in modding my PST, but I have some concern about the tools fitting. Does someone with a digital caliper have the measurements of the thickness (of the area around the pivot hole) of the wave/charge saw, and of the surge saw/file holder. Thanks a ton!reference InformationDiameter axes:The diameter of the PST pliers axis - 4.8mm, length 9mmDiameter pliers axis Wave Original - 4.8mm, length of 14.4 mmDiameter pliers axis Wave New - 5.5mm, length of 13.3 mmDiameter pliers axis Blast / Fuse / Kick - 5.5mm, length 16.4 / 14.8 / mm?Diameter pliers axis ST300 - 5.5mm, the length of 9.5 mmDiameter pliers axis Surge - 5.5mm, length 15.5mmThe diameter of the PST tool axis - 4.8mmThe diameter of the tool axis Wave Original -4.8 mm, length 13.1 mmThe diameter of the tool axis Wave - 4.8mmThe diameter of the tool axis Blast / Fuse / Kick - 4.8mm, length 16.4 / 14.8 / mm?The diameter of the tool axis ST300 - 4.8mmShaft diameter with tools Surge- 4.8mm, Length 16.7mmThickness tools:Phillips screwdriver Kick / Fuse / Blast - 5mmOpener Kick / Fuse / Blast / Wave / Charge - 1,87mmKnife Kick - 1,74mmRing Lanyard Kick / Fuse / Blast - 0,77 mmAll the other instruments (approximately) - 2,34-2,36mmTools SOG - 1,98mm (except adapter on bits)
Hi, I'm very interested in modding my PST, but I have some concern about the tools fitting. Does someone with a digital caliper have the measurements of the thickness (of the area around the pivot hole) of the wave/charge saw, and of the surge saw/file holder. Thanks a ton!
Hello Loki! I could really use some pivots from a Leatherman Charge if you have some available. I'm modding a Wave, and need ones that are longer than stock, especially for the plier pivot. 2 sets would be even better if you have them!I would also take a Charge TTi/XTi/ALX Serrated Blade with Hook if you have one available, and a set of Charge TTi scales as well.Thank you,Greg
Do you happen to have straight edge blade replacement for LM Signal?
Serrated blade with hook, TTi scales(4ps) (old version), 2 pivots (2screw+2axis) in stock - $63 with shipping
Quote from: loki-mobile on September 27, 2017, 08:40:20 PMSerrated blade with hook, TTi scales(4ps) (old version), 2 pivots (2screw+2axis) in stock - $63 with shippingSorry I didn't see that you had replied before I sent you a message about some of your stuff on eBay. I should have specified that I am looking for the new version of the scales, but I'll take everything else! Any chance that you would have two full sets of axis and screws for a charge (4 small and 4 large)?Thank you Loki, you're a life saver!!!
PM sent...ill go make a few posts so I can start sending PMs and send you my address!Thank you Loki!!!
Hey Loki, do you have stock for all 4 pivot screws for a charge? Stainless steel, torx type.
Hi Loki. First off thank you very much for providing these parts. This is such a huge benefit to us all and its just great we can get them from a valued member. I was looking for a price on Old Style Surge pivots ( plier end ). Thank you.
Quote from: Sam Lim on October 13, 2017, 12:34:54 PMHey Loki, do you have stock for all 4 pivot screws for a charge? Stainless steel, torx type.Sorry for delay with answer. 4 pivot screws for Charge Ti/XTi/TTi - $28 with shipping (new)
Bought my first leatherman a couple of months back and love it. Have already made my first Mod and have caught the moding bug.It's way too expensive in New Zealand here to buy another leatherman to get a part or two.Any chance Loki, that you will get the Rebar pliers back in stock any time soon?Is the Rebar awl any good or is there a better one to put into my Wave?
Hi Loki, any info about the screw?
Hi Loki, wish to place order for Wave S30v blade plus the appropriate t10 torx bits. pm sent. Cheers
Quote from: zux on December 09, 2017, 10:25:55 PMHi Loki, any info about the screw?Sorry, did not notice the message. Need only a screw?