Parts for Upgrade/Repair Leatherman multitools

loki-mobile · **Reply #270 on:** September 17, 2017, 09:59:02 PM

Quote from: Dutch_Tooler on September 17, 2017, 09:20:44 PM

Quote from: loki-mobile on January 19, 2017, 12:03:15 PM
Quote from: irona on January 16, 2017, 07:52:11 AM
Hi, I'm very interested in modding my PST, but I have some concern about the tools fitting. Does someone with a digital caliper have the measurements of the thickness (of the area around the pivot hole) of the wave/charge saw, and of the surge saw/file holder. Thanks a ton!
reference Information
Diameter axes:
The diameter of the PST pliers axis - 4.8mm, length 9mm
Diameter pliers axis Wave Original - 4.8mm, length of 14.4 mm
Diameter pliers axis Wave New - 5.5mm, length of 13.3 mm
Diameter pliers axis Blast / Fuse / Kick - 5.5mm, length 16.4 / 14.8 / mm?
Diameter pliers axis ST300 - 5.5mm, the length of 9.5 mm
Diameter pliers axis Surge - 5.5mm, length 15.5mm
The diameter of the PST tool axis - 4.8mm
The diameter of the tool axis Wave Original -4.8 mm, length 13.1 mm
The diameter of the tool axis Wave - 4.8mm
The diameter of the tool axis Blast / Fuse / Kick - 4.8mm, length 16.4 / 14.8 / mm?
The diameter of the tool axis ST300 - 4.8mm
Shaft diameter with tools Surge- 4.8mm, Length 16.7mm

Thickness tools:
Phillips screwdriver Kick / Fuse / Blast - 5mm
Opener Kick / Fuse / Blast / Wave / Charge - 1,87mm
Knife Kick - 1,74mm
Ring Lanyard Kick / Fuse / Blast - 0,77 mm
All the other instruments (approximately) - 2,34-2,36mm

Tools SOG - 1,98mm (except adapter on bits)
Hi Loki,

Just curious, do you have any of these axis items available as a spare part? I'd be in the market for a Wave plier-side pivot/axis. Thanks in advance!

Sent on my SM-G930F with Tapatalk

Yes, I have the axes of pliers for the wave

Отправлено с моего MI 6 через Tapatalk

Dutch_Tooler · **Reply #271 on:** September 18, 2017, 06:59:02 AM

Thanks Loki, see PM please

Sent on my SM-G930F with Tapatalk

g.p. · **Reply #272 on:** September 27, 2017, 08:04:06 AM

Hello Loki! I could really use some pivots from a Leatherman Charge if you have some available. I'm modding a Wave, and need ones that are longer than stock, especially for the plier pivot. 2 sets would be even better if you have them!

I would also take a Charge TTi/XTi/ALX Serrated Blade with Hook if you have one available, and a set of Charge TTi scales as well.

Thank you,
Greg

Kazak · **Reply #273 on:** September 27, 2017, 04:32:20 PM

Do you happen to have straight edge blade replacement for LM Signal?

loki-mobile · **Reply #274 on:** September 27, 2017, 08:40:20 PM

Quote from: g.p. on September 27, 2017, 08:04:06 AM

Hello Loki! I could really use some pivots from a Leatherman Charge if you have some available. I'm modding a Wave, and need ones that are longer than stock, especially for the plier pivot. 2 sets would be even better if you have them!

I would also take a Charge TTi/XTi/ALX Serrated Blade with Hook if you have one available, and a set of Charge TTi scales as well.

Thank you,
Greg

Serrated blade with hook, TTi scales(4ps) (old version), 2 pivots (2screw+2axis) in stock - $63 with shipping

loki-mobile · **Reply #275 on:** September 27, 2017, 08:41:27 PM

Quote from: Kazak on September 27, 2017, 04:32:20 PM

Do you happen to have straight edge blade replacement for LM Signal?

Not available now, but I can try to order from a supplier

Michael Davis · **Reply #276 on:** September 28, 2017, 04:14:02 AM

Is it possible to get just a leatherman wave serrated blade? If so how much?

g.p. · **Reply #277 on:** September 28, 2017, 06:38:35 AM

Quote from: loki-mobile on September 27, 2017, 08:40:20 PM

Serrated blade with hook, TTi scales(4ps) (old version), 2 pivots (2screw+2axis) in stock - $63 with shipping

Sorry I didn't see that you had replied before I sent you a message about some of your stuff on eBay.

I should have specified that I am looking for the new version of the scales, but I'll take everything else! Any chance that you would have two full sets of axis and screws for a charge (4 small and 4 large)?

Thank you Loki, you're a life saver!!!

loki-mobile · **Reply #278 on:** September 28, 2017, 09:01:40 PM

Quote from: g.p. on September 28, 2017, 06:38:35 AM

Quote from: loki-mobile on September 27, 2017, 08:40:20 PM
Serrated blade with hook, TTi scales(4ps) (old version), 2 pivots (2screw+2axis) in stock - $63 with shipping
Sorry I didn't see that you had replied before I sent you a message about some of your stuff on eBay.

I should have specified that I am looking for the new version of the scales, but I'll take everything else! Any chance that you would have two full sets of axis and screws for a charge (4 small and 4 large)?

Thank you Loki, you're a life saver!!!

reply to PM

g.p. · **Reply #279 on:** September 28, 2017, 09:19:19 PM

Payment sent...ill go make a few posts so I can start sending PMs and send you my address!

Thank you Loki!!!

loki-mobile · **Reply #280 on:** September 28, 2017, 10:00:09 PM

Quote from: g.p. on September 28, 2017, 09:19:19 PM

PM sent...ill go make a few posts so I can start sending PMs and send you my address!

Thank you Loki!!!

waiting for the address in pm

Отправлено с моего MI 6 через Tapatalk

Sam Lim · **Reply #281 on:** October 13, 2017, 12:34:54 PM

Hey Loki, do you have stock for all 4 pivot screws for a charge? Stainless steel, torx type.

g.p. · **Reply #282 on:** October 19, 2017, 05:14:25 AM

Parts arrived today safe and sound.

Thank you Loki!!!

Aloha · **Reply #283 on:** October 19, 2017, 06:53:45 AM

Hi Loki. First off thank you very much for providing these parts. This is such a huge benefit to us all and its just great we can get them from a valued member. I was looking for a price on Old Style Surge pivots ( plier end ). Thank you.

loki-mobile · **Reply #284 on:** October 22, 2017, 11:07:20 AM

Quote from: Sam Lim on October 13, 2017, 12:34:54 PM

Hey Loki, do you have stock for all 4 pivot screws for a charge? Stainless steel, torx type.

Sorry for delay with answer. 4 pivot screws for Charge Ti/XTi/TTi - $28 with shipping (new)

loki-mobile · **Reply #285 on:** October 22, 2017, 11:19:01 AM

Quote from: Aloha007 on October 19, 2017, 06:53:45 AM

Hi Loki. First off thank you very much for providing these parts. This is such a huge benefit to us all and its just great we can get them from a valued member. I was looking for a price on Old Style Surge pivots ( plier end ). Thank you.

Only one used. Or two black new

loki-mobile · **Reply #286 on:** October 22, 2017, 11:20:27 AM

Current availability:
Price includes shipping worldwide.

Pliers:
ST300/NEW Surge/MUT Pliers - $35 (3 new)
MUT Black Pliers - $38 (2 new)
Blast/Fuse/Wave/Charge Ti Pliers - $35 (5 new)
Skeletool/Freestyle pliers - $30 (4 new)
Charge ALX Black - $38 (1 new)
ST300/New Surge CC Black - $38 (2 new)

Blades:
Wave - $17 (3 new)
Charge Ti/Al/ALX (154CM) - $20 (5 new)
Charge ALX black (154CM) - $25 (2 new)
Charge TTi/XTi/ALX Serrated Blade with Hook - $25 (10 new)
Skeletool/Freestyle (420) - $17 (10 new)
Skeletool/Freestyle (154CM) - $21 (5 new)
Skeletool/Freestyle (Combo 154CM) - $25 (1 new)
Surge - $22 (3 new)
Surge serrated - $22 (3 new)
MUT black - $27 (1 new)
ST300 EOD Semiserrated blade - $28
ST300 Black blade (not new, but excellent condition) - $19
ST300 blade - $18
Blast/Fuse blade - $19

Other:
Wave/Charge saw - $17 (3 new)
Wave/Charge file - $17 (7 new)
Blast/Fuse File - $19
Blast Saw - $19
Wave/Charge big bits holder - $12 (10 new)
Wave/Charge/Blast small bits holder - $12 (20 new)
Wave/Charge/Blast/Rebar flat screwdriver - $12 (20 new)
Wave/Charge/Blast/Rebar flat screwdriver black - $14 (10 new)
Blast/Fuse small flat screwdriver - $12 (5 new)
Rebar small flat screwdriver - $12 (3 new)
Wave/Charge/Blast/Rebar opener - $10 (10 new)
Wave/Charge/Blast/Fuse scissors - $15 (20 new)
Blast/Fuse/Kick phillips screwdriver - $15 (1 new)
Rebar awl - $12 (4 new)
Surge/ST300 awl - $12 (3 new)
Surge/ST300 awl black - $14 (3 new)
Surge big bits holder - $17 (2 new)
Surge small bits holder - $17 (5 new)
Surge saw/file holder - $22 (7 new)
Surge saw/file holder black - $24 (4 new)
Surge scissors - $28 (10 new)
Surge scissors black - $30 (1 new)
Surge/ST300 small flat screwdriver - $12 (5 new)
Surge/ST300 small flat screwdriver black - $14 (3 new)
Surge/ST300 big flat screwdriver - $12 (2 new)
Surge/ST300 big flat screwdriver black - $14 (2new)
MUT saw - $25 (1 new)
ST300 saw holder - $45 (2 new) High price, picked to try & my progect

Wingman scissors - $19 (3 new) High price, picked to try & my progect

Kick Pocket Clip - $20

Sam Lim · **Reply #287 on:** October 22, 2017, 04:12:23 PM

Quote from: loki-mobile on October 22, 2017, 11:07:20 AM

Quote from: Sam Lim on October 13, 2017, 12:34:54 PM
Hey Loki, do you have stock for all 4 pivot screws for a charge? Stainless steel, torx type.
Sorry for delay with answer. 4 pivot screws for Charge Ti/XTi/TTi - $28 with shipping (new)

Thanks Loki, I am keen. Do you ship to Singapore?

386greene · **Reply #288 on:** October 24, 2017, 04:57:24 AM

I'm interested in one of those surge saw file holders, good sir

Scubix · **Reply #289 on:** November 18, 2017, 08:49:24 PM

Bought my first leatherman a couple of months back and love it. Have already made my first Mod and have caught the moding bug.
It's way too expensive in New Zealand here to buy another leatherman to get a part or two.

Any chance Loki, that you will get the Rebar pliers back in stock any time soon?
Is the Rebar awl any good or is there a better one to put into my Wave?

zoidberg · **Reply #290 on:** November 18, 2017, 09:01:21 PM

If you can be bothered with the work, the ST300 or Surge awl works better IMO. You'll need to re profile the pivot locking area.
While the Rebar awl isn't great it still works and is better than the Signal awl.
Welcome to the boards Scubix.

loki-mobile · **Reply #291 on:** November 18, 2017, 09:16:19 PM

Quote from: Scubix on November 18, 2017, 08:49:24 PM

Bought my first leatherman a couple of months back and love it. Have already made my first Mod and have caught the moding bug.
It's way too expensive in New Zealand here to buy another leatherman to get a part or two.

Any chance Loki, that you will get the Rebar pliers back in stock any time soon?
Is the Rebar awl any good or is there a better one to put into my Wave?

Reply to PM

Отправлено с моего MI 6 через Tapatalk

zoidberg · **Reply #292 on:** November 18, 2017, 09:18:54 PM

Replying to a PM gets unlocked at 5+ posts.

5hif7y · **Reply #293 on:** November 20, 2017, 12:10:18 AM

Received my tools on Friday. Thanks again loki

zux · **Reply #294 on:** November 23, 2017, 09:55:21 PM

Hi loki. Do you happen to have a screw for leatherman rebar? I have lost mine and can't find a replacement. The screw, that holds together the axis holding the tools.