Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Parts for Upgrade/Repair Leatherman multitools

loki-mobile · 578 · 67995
« previous next »
Pages: 1 ... 9 10 11 12 13 ... 20   Go Down

us Offline Tarheelpwr

  • Full Member
  • ***
    • Posts: 125
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #300 on: December 19, 2017, 05:24:25 AM
How much are the S30V Wave blades?

gb Offline Snake

  • Newbie
  • *
    • Posts: 21
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #301 on: December 29, 2017, 03:34:15 PM
Do you still have the MUT saw blade available?

ru Offline loki-mobile

  • Hero Member
  • *****
    • Posts: 691
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #302 on: January 01, 2018, 10:50:58 AM
Quote from: Snake on December 29, 2017, 03:34:15 PM
Do you still have the MUT saw blade available?
Happy new year. MUT saw are now out of stock, but can be ordered from the supplier at the end of January.

Отправлено с моего MI 6 через Tapatalk


Offline Samuelcox

  • Newbie
  • *
    • Posts: 6
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #303 on: January 02, 2018, 07:13:18 PM
Looking for a awl for a black surge if you have one left?
What is available in the way of upgrade to the pliers as mine are pretty blunt too!?

Thanks
Sam

nz Offline Syncop8r

  • Absolutely No Life Club
  • *******
    • Posts: 8,763
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #304 on: January 02, 2018, 08:59:46 PM
Quote from: Samuelcox on January 02, 2018, 07:13:18 PM
What is available in the way of upgrade to the pliers as mine are pretty blunt too!?
Is yours an original Surge with the non-replaceable cutters?

Offline Samuelcox

  • Newbie
  • *
    • Posts: 6
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #305 on: January 03, 2018, 12:02:31 PM
Quote from: Syncop8r on January 02, 2018, 08:59:46 PM
Quote from: Samuelcox on January 02, 2018, 07:13:18 PM
What is available in the way of upgrade to the pliers as mine are pretty blunt too!?
Is yours an original Surge with the non-replaceable cutters?

Yep original surge

ru Offline loki-mobile

  • Hero Member
  • *****
    • Posts: 691
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #306 on: January 03, 2018, 12:36:34 PM
Quote from: Samuelcox on January 03, 2018, 12:02:31 PM
Quote from: Syncop8r on January 02, 2018, 08:59:46 PM
Quote from: Samuelcox on January 02, 2018, 07:13:18 PM
What is available in the way of upgrade to the pliers as mine are pretty blunt too!?
Is yours an original Surge with the non-replaceable cutters?

Yep original surge
I'll look for an awl, and pliers can only be replaced with the same ones

Отправлено с моего MI 6 через Tapatalk


pt Offline FInixNOver

  • Hero Member
  • *****
    • Posts: 825
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #307 on: January 05, 2018, 12:10:28 AM
If you still have them available, I would like to buy:
1x Wave/Charge big bits holder - $12

Sent you a PM.
Merit Badges Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of a flashlight as part of your EDC

Offline Samuelcox

  • Newbie
  • *
    • Posts: 6
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #308 on: January 06, 2018, 11:03:34 PM
To reference a previous post:
The sut300 pliers do pretty much fit the surge (with a slight gap caused) can you fit rebar pliers instead with Spacers?
https://forum.multitool.org/index.php/topic,71933.msg1472998.html#msg1472998

pt Offline FInixNOver

  • Hero Member
  • *****
    • Posts: 825
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #309 on: January 10, 2018, 11:52:43 AM
Quote from: loki-mobile on October 22, 2017, 11:20:27 AM
Current availability:
Price includes shipping worldwide.

Pliers:
ST300/NEW Surge/MUT Pliers - $35 (3 new)
MUT Black Pliers - $38 (2 new)
Blast/Fuse/Wave/Charge Ti Pliers - $35 (5 new)
Skeletool/Freestyle pliers - $30 (4 new)
Charge ALX Black - $38 (1 new)
ST300/New Surge CC Black - $38 (2 new)

Blades:
Wave - $17 (3 new)
Charge Ti/Al/ALX (154CM) - $20 (5 new)
Charge ALX black (154CM) - $25 (2 new)
Charge TTi/XTi/ALX Serrated Blade with Hook - $25 (10 new)
Skeletool/Freestyle (420) - $17 (10 new)
Skeletool/Freestyle (154CM) - $21 (5 new)
Skeletool/Freestyle (Combo 154CM) - $25 (1 new)
Surge - $22 (3 new)
Surge serrated - $22 (3 new)
MUT black - $27 (1 new)
ST300 EOD Semiserrated blade - $28
ST300 Black blade (not new, but excellent condition) - $19
ST300 blade - $18
Blast/Fuse blade - $19


Other:
Wave/Charge saw - $17 (3 new)
Wave/Charge file - $17 (7 new)
Blast/Fuse File - $19
Blast Saw - $19
Wave/Charge big bits holder - $12 (10 new)
Wave/Charge/Blast small bits holder - $12 (20 new)
Wave/Charge/Blast/Rebar flat screwdriver - $12 (20 new)
Wave/Charge/Blast/Rebar flat screwdriver black - $14 (10 new)
Blast/Fuse small flat screwdriver - $12 (5 new)
Rebar small flat screwdriver - $12 (3 new)
Wave/Charge/Blast/Rebar opener - $10 (10 new)
Wave/Charge/Blast/Fuse scissors - $15 (20 new)
Blast/Fuse/Kick phillips screwdriver - $15 (1 new)
Rebar awl - $12 (4 new)
Surge/ST300 awl - $12 (3 new)
Surge/ST300 awl black - $14 (3 new)
Surge big bits holder - $17 (2 new)
Surge small bits holder - $17 (5 new)
Surge saw/file holder - $22 (7 new)
Surge saw/file holder black - $24 (4 new)
Surge scissors - $28 (10 new)
Surge scissors black - $30 (1 new)
Surge/ST300 small flat screwdriver - $12 (5 new)
Surge/ST300 small flat screwdriver black - $14 (3 new)
Surge/ST300 big flat screwdriver - $12 (2 new)
Surge/ST300 big flat screwdriver black - $14 (2new)
MUT saw - $25 (1 new)
ST300 saw holder - $45 (2 new) High price, picked to try & my progect :)
Wingman  scissors - $19 (3 new) High price, picked to try & my progect :)
Kick Pocket Clip - $20

If you still have them available, I would like to buy:
1x Wave/Charge big bits holder - $12

Sent you a PM. Can you check your inbox please, and get back to me with an answer when you can?
Thanks!
Merit Badges Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of a flashlight as part of your EDC

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #310 on: January 26, 2018, 06:33:15 PM
Hi loki-mobile would you have a pivot screw that would fit the screw that came with the kick pocket clip
I want to fit it to my LM crunch but the thread pitch is more course on the crunch
And fine thread pitch on the kick screw here is a photo to see the difference
I tried this when I pm you but wouldn't work
Thanks again Wspeed  :tu:
image.jpeg
* image.jpeg (Filesize: 182.3 KB)
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

Offline lew

  • Full Member
  • ***
    • Posts: 165
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #311 on: January 26, 2018, 07:13:50 PM
Just found this thread.  I need a file for an original SuperTool.  Can you get those?
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

ru Offline loki-mobile

  • Hero Member
  • *****
    • Posts: 691
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #312 on: January 26, 2018, 07:49:35 PM
Quote from: lew on January 26, 2018, 07:13:50 PM
Just found this thread.  I need a file for an original SuperTool.  Can you get those?
Only used,but good condition.

Отправлено с моего MI 6 через Tapatalk


ro Offline Raoul Octav

  • Sr. Member
  • ****
    • Posts: 416
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #313 on: January 28, 2018, 09:22:17 AM
Hello, i've been a lurker for some time and now i decided to go the Mod Path with some of my Lmn's.
Since this is my first post, greetings to y'all.
Dear Loki
I need the following:
1x Surge saw/file holder - $22
*with the screws/pins from that side (i believe they are a bit longer). You can throw a washer also.
1x Blade -Charge Ti/Al/ALX (154CM) - $20
*If some parts arrive in the mean time i would preffer a Charge TTi (S30V)
1x MUT saw - $25
Sanger's laws:

-any problem has more than one resolve!

-by the way you look at the problem, the resolve may change!

-where's a will there's a way !

ro Offline Raoul Octav

  • Sr. Member
  • ****
    • Posts: 416
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #314 on: January 28, 2018, 10:00:17 AM
It seems that i am not allowed to send PMs.
@Loki-mobile- how do we proceed further
Sanger's laws:

-any problem has more than one resolve!

-by the way you look at the problem, the resolve may change!

-where's a will there's a way !

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,360
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #315 on: January 28, 2018, 11:11:41 AM
Quote from: Raoul Octav on January 28, 2018, 10:00:17 AM
It seems that i am not allowed to send PMs.
@Loki-mobile- how do we proceed further
Welcome Raoul! You need at least 5 posts to send PMs. Preferably with pics of MTs or SAKs you possess :D
Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread showing a photo of at least three BO tools Start a new thread with photos of your zip ties in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 67,566
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #316 on: January 28, 2018, 02:22:48 PM
Quote from: Raoul Octav on January 28, 2018, 10:00:17 AM
It seems that i am not allowed to send PMs.
@Loki-mobile- how do we proceed further

You will be able to send PM's now  :tu:
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month.

Offline lew

  • Full Member
  • ***
    • Posts: 165
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #317 on: January 30, 2018, 10:11:46 PM
Quote from: loki-mobile on January 26, 2018, 07:49:35 PM
Quote from: lew on January 26, 2018, 07:13:50 PM
Just found this thread.  I need a file for an original SuperTool.  Can you get those?
Only used,but good condition.

Отправлено с моего MI 6 через Tapatalk
Thanks for the reply.  I was going to buy one but Leatherman is going to replace it.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

ro Offline Raoul Octav

  • Sr. Member
  • ****
    • Posts: 416
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #318 on: February 14, 2018, 11:29:40 AM
Thanks Loki. 
Very nice touch with the postal card.
All the best from Romania
rsz_img_20180214_122258.jpg
* rsz_img_20180214_122258.jpg (Filesize: 199.9 KB)
Sanger's laws:

-any problem has more than one resolve!

-by the way you look at the problem, the resolve may change!

-where's a will there's a way !

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #319 on: February 18, 2018, 10:33:44 AM
Hey brother Loki! Need your wrenches for the knurled screws. PM sent.
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #320 on: February 21, 2018, 05:38:10 PM
Hmm... Anyone manage to get in touch with Loki? Having trouble reaching him lately.. Even tried message on EBay.. nothing.. Hope everything is ok.
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 67,566
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #321 on: February 21, 2018, 05:47:46 PM
He was on here this morning  :think:
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month.

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #322 on: February 21, 2018, 05:51:02 PM
He is online now :ahhh :ahhh
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

ru Offline loki-mobile

  • Hero Member
  • *****
    • Posts: 691
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #323 on: February 21, 2018, 06:03:59 PM
Quote from: Sam Lim on February 21, 2018, 05:38:10 PM
Hmm... Anyone manage to get in touch with Loki? Having trouble reaching him lately.. Even tried message on EBay.. nothing.. Hope everything is ok.
Sorry wrenches now out of stock.

Отправлено с моего MI 6 через Tapatalk


00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #324 on: February 21, 2018, 07:20:51 PM
Quote from: loki-mobile on February 21, 2018, 06:03:59 PM
Quote from: Sam Lim on February 21, 2018, 05:38:10 PM
Hmm... Anyone manage to get in touch with Loki? Having trouble reaching him lately.. Even tried message on EBay.. nothing.. Hope everything is ok.
Sorry wrenches now out of stock.

Отправлено с моего MI 6 через Tapatalk

 :) ok!
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

be Offline Top-Gear-24

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,765
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #325 on: February 24, 2018, 09:06:03 PM
Quote from: loki-mobile on February 21, 2018, 06:03:59 PM
Quote from: Sam Lim on February 21, 2018, 05:38:10 PM
Hmm... Anyone manage to get in touch with Loki? Having trouble reaching him lately.. Even tried message on EBay.. nothing.. Hope everything is ok.
Sorry wrenches now out of stock.

Отправлено с моего MI 6 через Tapatalk

Any idea when they will be back in stock ?

After giving my ST200 some TLC and having a hard time using two pair of pliers to tighten it up I'd just decided to order these wrenches  ;).
Merit Badges Must start a thread with a photo of your birth year SAK Must buy something on EDCSource Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your stayglow SAK You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of at least 8 different 130mm models in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your Mora knives in use Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a thread with a photo of a repair you made with duct tape Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least five BO tools Start a new thread and post a picture of fire making kit or fire with a multitool

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #326 on: February 24, 2018, 09:19:02 PM
Hi Top-Gear-24 I spoke to loki-mobile yesterday
He said he's working on it so hopefully soon :salute:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

be Offline Top-Gear-24

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,765
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #327 on: February 24, 2018, 09:33:05 PM
Quote from: Wspeed on February 24, 2018, 09:19:02 PM
Hi Top-Gear-24 I spoke to loki-mobile yesterday
He said he's working on it so hopefully soon :salute:

Thanks mate  :salute:.

Merit Badges Must start a thread with a photo of your birth year SAK Must buy something on EDCSource Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your stayglow SAK You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of at least 8 different 130mm models in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your Mora knives in use Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a thread with a photo of a repair you made with duct tape Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least five BO tools Start a new thread and post a picture of fire making kit or fire with a multitool

Offline Xire .

  • Newbie
  • *
    • Posts: 17
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #328 on: March 01, 2018, 03:59:10 PM
Hi Loki its mollemodular. May i buy the items off you here instead?

Offline Xire .

  • Newbie
  • *
    • Posts: 17
Re: Parts for Upgrade/Repair Leatherman multitools
Reply #329 on: March 02, 2018, 02:13:14 AM
PM inbound

Pages: 1 ... 9 10 11 12 13 ... 20   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $122.41
PayPal Fees: $6.85
Net Balance: $115.56
Below Goal: $184.44
Site Currency: USD
39% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal