Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


New to Gerber - 400 or 600? or diesel? or... ?

danilo · 17 · 3960
« previous next »
Pages: 1   Go Down

it Offline danilo

  • Full Member
  • ***
    • Posts: 220
New to Gerber - 400 or 600? or diesel? or... ?
on: July 05, 2016, 06:40:08 PM
Hi all,
I've been tempted by a Gerber MultiTool now for quite a while, what first took my attention was the 400 Compact Sport, which has a nice tool selection for me and it's smaller than the 600 line, which may be a good thing.

But what about the 600 line? I see most threads here are about the 600, and since here the 400 and the 600 have similar prices maybe it's better if I investigate on them (which means asking you :))

Also the diesel one has a similar price, what about it?

Which one do you prefer and why?

I already have a Swisstool, a Charge TTI  and a Crunch as multitools, if this helps, and I find myself carrying either the Charge or the Crunch over the swisstool.
The Charge because along with the bit sets and the extender is quite capable, while being smaller, while when I bring the Crunch it's because it is small and light (and yet it's the best one if you have to un-tight a bolt, as it grips and you can use your force just to un-screw the bugger...)


Thanks in advance!!

Danilo

Offline jday2727

  • Sr. Member
  • ****
    • Posts: 408
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #1 on: July 05, 2016, 06:44:12 PM
IMO the 600 isn't any bigger in carry than the 400, especially when you consider the added durability and tool set.

Sent from my Z987 using Tapatalk

Merit Badges Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days.

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,991
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #2 on: July 05, 2016, 06:48:17 PM
I guess I am the opposite as I prefer the MP400 over the 600 :D I have had a 600 for ages and never carried it as I felt it to bulky for the toolset it has I guess :think: I have just recently been given a MP400 by another member here (Demel) and I find that I love the size of the 400 enough that when the Supertool challenge is over this month I will carry the 400 in rotation as a weekend tool :tu:

Just my 2 cents though ;)
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline rdub934

  • No Life Club
  • ******
    • Posts: 1,991
  • Without POL, pilots are pedestrians
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #3 on: July 05, 2016, 08:16:31 PM
Whew, tough one :think: When it comes to deciding between one or the other, I would tell you to take a good look at what you need the tool for. Knowing that you prefer your Charge and Crunch instead of your SwissTool, I think I'd recommend you get the MP400.

Remember, the MP600 ProScout offers a very similar tool load to the Charge. So capability would be close to what you are used to, even if the size is greater
"I wanna introduce you to a very personal friend of mine. This is an M41A pulse rifle. Ten millimeter with over-and-under thirty millimeter pump action grenade launcher." - Cpl Hicks
Merit Badges Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms) Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo showing the axe in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread showing photos of at least 3 different sporks in use Start a new thread demonstrating paracord knot tying Must start a thread showing a photo of at least three BO tools Start a new thread and post a photo of a flashlight as part of your EDC Must start new thread with photos of multitools (Magazine/Catalogue type photos)

it Offline danilo

  • Full Member
  • ***
    • Posts: 220
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #4 on: July 06, 2016, 12:09:01 AM
Thank you all,
I've watched all of them again, and went for the 400, It'll reach me in a few days, I'll keep you updated~


 :multi: :multi: :multi: :multi: :multi: :multi: :multi:

us Offline jerseydevil

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 10,459
  • Join us! Embrace the Flicky Faith!
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #5 on: July 06, 2016, 02:51:55 AM
Excellent choice. :tu: the MP400 is an excellent tool, and will serve you well.
There's no such thing as "Too pretty to carry".  There's only "Too pretty NOT to carry"...... >:D
Merit Badges Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days.

us Offline rdub934

  • No Life Club
  • ******
    • Posts: 1,991
  • Without POL, pilots are pedestrians
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #6 on: July 06, 2016, 03:15:58 AM
It's a great tool. I believe you will be happy with it. Congrats :tu:
"I wanna introduce you to a very personal friend of mine. This is an M41A pulse rifle. Ten millimeter with over-and-under thirty millimeter pump action grenade launcher." - Cpl Hicks
Merit Badges Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms) Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo showing the axe in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread showing photos of at least 3 different sporks in use Start a new thread demonstrating paracord knot tying Must start a thread showing a photo of at least three BO tools Start a new thread and post a photo of a flashlight as part of your EDC Must start new thread with photos of multitools (Magazine/Catalogue type photos)

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,991
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #7 on: July 06, 2016, 03:24:53 AM
Quote from: jerseydevil on July 06, 2016, 02:51:55 AM
Excellent choice. :tu: the MP400 is an excellent tool, and will serve you well.

Though I have only had mine for a short while I believe you made the right choice :cheers:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline Demel

  • *
  • No Life Club
  • ******
    • Posts: 2,476
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #8 on: July 06, 2016, 04:46:19 AM
The mp400 is one of Gerber's best offerings. Understanding what is offers will help you appreciate it all the more. 😠
"Talent is God given. Be humble. Fame is man-given. Be grateful. Conceit is self-given. Be careful." -John Wooden
Merit Badges Start a new thread with photos of your titanium gear with a multitool or sak Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread with a photo showing the Hook in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of at least five (5) of your watches

it Offline danilo

  • Full Member
  • ***
    • Posts: 220
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #9 on: July 06, 2016, 07:12:03 AM
Thanks for the encouraging words ;)

I'm looking forward to receiving it !!

england Offline macabee

  • *
  • Sr. Member
  • ****
    • Posts: 355
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #10 on: July 06, 2016, 10:05:04 AM
As I am lucky to have a small collection of 600's and one 400, I really like both, however the 400 is a great carry, all I can suggest is get both! :whistle:
"One SAK is all right. Two are too many, and three are not enough"
Merit Badges Start a new thread and post a photo of a flashlight as part of your EDC

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,991
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #11 on: July 06, 2016, 01:57:37 PM
Quote from: macabee on July 06, 2016, 10:05:04 AM
As I am lucky to have a small collection of 600's and one 400, I really like both, however the 400 is a great carry, all I can suggest is get both! :whistle:

 :doh: Of course he needs to get both it is the MTO motto and I can't believe I forgot it :facepalm:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

it Offline danilo

  • Full Member
  • ***
    • Posts: 220
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #12 on: July 12, 2016, 11:34:40 AM
So,
the Gerber 400 arrived yesterday, I've been trying to get some pictures of it, but my phone's camera isn't working - frigging phones...

First impressions: the tool is nice and small, the sliding pliers head is very ingenious, and overall I like it very much.

I haven't used it that much, I've just needed the pliers once to bend some aluminium, they worked great of course.

I'm glad I went for the 400, its small size is a plus for me.

Danilo

EDIT: ah, I almost forgot it: the scissors are great! one of the best out there!

us Offline rdub934

  • No Life Club
  • ******
    • Posts: 1,991
  • Without POL, pilots are pedestrians
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #13 on: July 12, 2016, 03:57:52 PM
Happy to hear that you got it and are enjoying it :tu: Although, I am not surprised - it is a great, little tool
"I wanna introduce you to a very personal friend of mine. This is an M41A pulse rifle. Ten millimeter with over-and-under thirty millimeter pump action grenade launcher." - Cpl Hicks
Merit Badges Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms) Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo showing the axe in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread showing photos of at least 3 different sporks in use Start a new thread demonstrating paracord knot tying Must start a thread showing a photo of at least three BO tools Start a new thread and post a photo of a flashlight as part of your EDC Must start new thread with photos of multitools (Magazine/Catalogue type photos)

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,991
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #14 on: July 12, 2016, 04:48:31 PM
Glad to hear you have it and that you are already taking a liking to it :cheers: The size of the 400 is one of its best features over the 600 IMO :tu:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline sawman

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,745
  • You're amongst friends.
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #15 on: July 12, 2016, 05:46:36 PM
I own both but the 600 is my favorite. It's funny when compared next to some other multitools it looks large but to me it fits so nicely in hand and the weight is actually very reasonable too IMO. It's a sturdy beast and to share a little history, I had a pro-scout about 13 years ago that I put through absolute hell and it never failed me.

That said, I do love my custom 400 also and would recommend either of these tools.
SAW

us Offline rdub934

  • No Life Club
  • ******
    • Posts: 1,991
  • Without POL, pilots are pedestrians
Re: New to Gerber - 400 or 600? or diesel? or... ?
Reply #16 on: July 12, 2016, 06:03:25 PM
Quote from: sawman on July 12, 2016, 05:46:36 PM
I own both but the 600 is my favorite. It's funny when compared next to some other multitools it looks large but to me it fits so nicely in hand and the weight is actually very reasonable too IMO. It's a sturdy beast and to share a little history, I had a pro-scout about 13 years ago that I put through absolute hell and it never failed me.

That said, I do love my custom 400 also and would recommend either of these tools.

I feel the same way regarding the size/weight of the 600. It does look big but it doesn't weight a lot in relation to the size. And its comfy in hand and is very well balanced :tu:
"I wanna introduce you to a very personal friend of mine. This is an M41A pulse rifle. Ten millimeter with over-and-under thirty millimeter pump action grenade launcher." - Cpl Hicks
Merit Badges Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms) Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo showing the axe in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread showing photos of at least 3 different sporks in use Start a new thread demonstrating paracord knot tying Must start a thread showing a photo of at least three BO tools Start a new thread and post a photo of a flashlight as part of your EDC Must start new thread with photos of multitools (Magazine/Catalogue type photos)

Pages: 1   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $122.41
PayPal Fees: $6.85
Net Balance: $115.56
Below Goal: $184.44
Site Currency: USD
39% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal