Mora Club

[ducttapetech]

Thanks!

[styx]

if the MTO crowd got to design a Mora, how would it look? (performance is always great on Mora knives so moot point)

[Gareth]

This needs a bump. Morakniv rulez!

nice feather stick mate.

[Gareth]

if the MTO crowd got to design a Mora, how would it look? (performance is always great on Mora knives so moot point)

I'd definitely start with a duel density grip. 

[ducttapetech]

This needs a bump. Morakniv rulez!

nice feather stick mate.

Thanks!

[SAK Guy]

This needs a bump. Morakniv rulez!

  Best curler I know!!!!!!  I'm putting that pic in my Mora research folder if it's ok with you Nate!!! 

[SAK Guy]

Re-posting an old fave!!

Orig 510...

[AlephZero]

if the MTO crowd got to design a Mora, how would it look? (performance is always great on Mora knives so moot point)

I'd definitely start with a duel density grip.

I was thinking exactly the same thing, also a full tang like Garberg would be nice (No, I'm not biased at all...  )

[Gareth]

if the MTO crowd got to design a Mora, how would it look? (performance is always great on Mora knives so moot point)

I'd definitely start with a duel density grip.

I was thinking exactly the same thing, also a full tang like Garberg would be nice (No, I'm not biased at all...  )

OK, I could go with that, but I think it'd have to be a thinner blade than the Gerberg.  Dare I suggest a slight drop point?  Not a big one, just something mild like this:

[AlephZero]

if the MTO crowd got to design a Mora, how would it look? (performance is always great on Mora knives so moot point)

I'd definitely start with a duel density grip.

I was thinking exactly the same thing, also a full tang like Garberg would be nice (No, I'm not biased at all...  )

OK, I could go with that, but I think it'd have to be a thinner blade than the Gerberg.  Dare I suggest a slight drop point?  Not a big one, just something mild like this:

(Image removed from quote.)

Hmm yeah, I could definitely go with that 

However, Scandi grind or not?

[styx]

I hope someone from Mora is reading this

[Zed]

Yes they do. How you like the 2000? I love the one Gaute gave me.

Yeah really like my 2000 Nate  it's the one Dave Canterbury sent me,it will go on my next camping trip 

[Gareth]

if the MTO crowd got to design a Mora, how would it look? (performance is always great on Mora knives so moot point)

I'd definitely start with a duel density grip.

I was thinking exactly the same thing, also a full tang like Garberg would be nice (No, I'm not biased at all...  )

OK, I could go with that, but I think it'd have to be a thinner blade than the Gerberg.  Dare I suggest a slight drop point?  Not a big one, just something mild like this:

(Image removed from quote.)

Hmm yeah, I could definitely go with that 

However, Scandi grind or not?

I think for a Mora it just has to be a Scandi grind.  I'm also thinking about blade length and width.  I might be biased because of how much I like the Eldris, but I'm leaning towards a shorter than normal blade.  Not Eldris short, but 1-2cm shorter than they normally make.  Thoughts?

[AlephZero]

if the MTO crowd got to design a Mora, how would it look? (performance is always great on Mora knives so moot point)

I'd definitely start with a duel density grip.

I was thinking exactly the same thing, also a full tang like Garberg would be nice (No, I'm not biased at all...  )

OK, I could go with that, but I think it'd have to be a thinner blade than the Gerberg.  Dare I suggest a slight drop point?  Not a big one, just something mild like this:

(Image removed from quote.)

Hmm yeah, I could definitely go with that 

However, Scandi grind or not?

I think for a Mora it just has to be a Scandi grind.  I'm also thinking about blade length and width.  I might be biased because of how much I like the Eldris, but I'm leaning towards a shorter than normal blade.  Not Eldris short, but 1-2cm shorter than they normally make.  Thoughts?

Yeah, I was thinking so too, but had to ask since Garberg doesn't have true Scandi grind, i has a secondary bevel 

Anyways a lil shorter blade would be more controllable (if that's a word )

[ducttapetech]

This needs a bump. Morakniv rulez!

  Best curler I know!!!!!!  I'm putting that pic in my Mora research folder if it's ok with you Nate!!! 

Sure! I am honored.

[ducttapetech]

Yes they do. How you like the 2000? I love the one Gaute gave me.

Yeah really like my 2000 Nate  it's the one Dave Canterbury sent me,it will go on my next camping trip 

Cool! I like so much I thought getting the Kansbol.

[ducttapetech]

if the MTO crowd got to design a Mora, how would it look? (performance is always great on Mora knives so moot point)

I'd definitely start with a duel density grip.

I was thinking exactly the same thing, also a full tang like Garberg would be nice (No, I'm not biased at all...  )

OK, I could go with that, but I think it'd have to be a thinner blade than the Gerberg.  Dare I suggest a slight drop point?  Not a big one, just something mild like this:

(Image removed from quote.)

Hmm yeah, I could definitely go with that 

However, Scandi grind or not?

I think for a Mora it just has to be a Scandi grind.  I'm also thinking about blade length and width.  I might be biased because of how much I like the Eldris, but I'm leaning towards a shorter than normal blade.  Not Eldris short, but 1-2cm shorter than they normally make.  Thoughts?

Yeah, I was thinking so too, but had to ask since Garberg doesn't have true Scandi grind, i has a secondary bevel 

Anyways a lil shorter blade would be more controllable (if that's a word )

I and about a 3 to 3.5 inch blade would be nice for edc. Not big, not small. Full scandi grind.

[Gareth]

if the MTO crowd got to design a Mora, how would it look? (performance is always great on Mora knives so moot point)

I'd definitely start with a duel density grip.

I was thinking exactly the same thing, also a full tang like Garberg would be nice (No, I'm not biased at all...  )

OK, I could go with that, but I think it'd have to be a thinner blade than the Gerberg.  Dare I suggest a slight drop point?  Not a big one, just something mild like this:

(Image removed from quote.)

Hmm yeah, I could definitely go with that 

However, Scandi grind or not?

I think for a Mora it just has to be a Scandi grind.  I'm also thinking about blade length and width.  I might be biased because of how much I like the Eldris, but I'm leaning towards a shorter than normal blade.  Not Eldris short, but 1-2cm shorter than they normally make.  Thoughts?

Yeah, I was thinking so too, but had to ask since Garberg doesn't have true Scandi grind, i has a secondary bevel 

Anyways a lil shorter blade would be more controllable (if that's a word )

I and about a 3 to 3.5 inch blade would be nice for edc. Not big, not small. Full scandi grind.

Are we in danger of describing the Mora Basic Pro?

[styx]

sounds like the are

[ducttapetech]

if the MTO crowd got to design a Mora, how would it look? (performance is always great on Mora knives so moot point)

I'd definitely start with a duel density grip.

I was thinking exactly the same thing, also a full tang like Garberg would be nice (No, I'm not biased at all...  )

OK, I could go with that, but I think it'd have to be a thinner blade than the Gerberg.  Dare I suggest a slight drop point?  Not a big one, just something mild like this:

(Image removed from quote.)

Hmm yeah, I could definitely go with that 

However, Scandi grind or not?

I think for a Mora it just has to be a Scandi grind.  I'm also thinking about blade length and width.  I might be biased because of how much I like the Eldris, but I'm leaning towards a shorter than normal blade.  Not Eldris short, but 1-2cm shorter than they normally make.  Thoughts?

Yeah, I was thinking so too, but had to ask since Garberg doesn't have true Scandi grind, i has a secondary bevel 

Anyways a lil shorter blade would be more controllable (if that's a word )

I and about a 3 to 3.5 inch blade would be nice for edc. Not big, not small. Full scandi grind.

Are we in danger of describing the Mora Basic Pro?

Maybe, it also needs the 2000 style blade.

[styx]

Guard or no guard?

[Gareth]

I'd go with "shape" over guard.  Though if we're thinking about some sort of rubber inserts then perhaps we could also be thinking about a more traditional barrel look?

[AlephZero]

I'd go with "shape" over guard.  Though if we're thinking about some sort of rubber inserts then perhaps we could also be thinking about a more traditional barrel look?

I'll go with Gareth in this one 

Now how about the sheath? Traditional Mora plastic one, Multi-mount like Garberg/Kansbol or Leather? Maybe all of them? 

[styx]

a lot of people will make a leather sheath if they really like the knife

[ducttapetech]

I'd go with "shape" over guard.  Though if we're thinking about some sort of rubber inserts then perhaps we could also be thinking about a more traditional barrel look?

I'll go with Gareth in this one 

Now how about the sheath? Traditional Mora plastic one, Multi-mount like Garberg/Kansbol or Leather? Maybe all of them?

I also agree. No guard. The sheath, I am thinking all options. And if I want, I can always make a nice sheath for it.

[ducttapetech]

a lot of people will make a leather sheath if they really like the knife

I agree. That what I would do. Although the new sheaths seem to be top notch.

[Gareth]

If we want it to sell well then I think we have to keep the sheath simple.

[styx]

so who has Mora on the phone?

[zoidberg]

I would like a couple (at least) models please.
First would be a three inch version of the 511 with guard and robust style sheath.
Second would be a five inch version of the robust without guard with 511 style handle and robust style sheath.
Old handles are easier to clean and lend to more grips.
New sheaths have better retention and are easier on and off the belt.

My older models have no gap between the blade and handle, my robust does have a gap on each side.
Does anyone else with the newer style handles have this gap?

[ReamerPunch]

This needs a bump. Morakniv rulez!

  Best curler I know!!!!!! 

Anette Norberg, Eva Lund, Cathrine Lindahl, and Anna Le Moine all have two gold medals in it, so there.