Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Fitting a SOG saw into the MP600

Troels · 6 · 1335
« previous next »
Pages: 1   Go Down

dk Offline Troels

  • Sr. Member
  • ****
    • Posts: 434
Fitting a SOG saw into the MP600
on: February 22, 2017, 10:57:07 PM
I always wanted a saw in the MP600 and SteveC has already provided the inspiration: http://forum.multitool.org/index.php/topic,67584.0.html

Some SOG tools came with the mail today


The SOG tools do not fit the MP600 without adjusting the shape to fit the lock but the pivot hole is a perfect fit.
I used a diamond file for the adjustment


The adjusted SOG saw blade - together the knife blade and an un-adjusted SOG saw blade


The SOG saw blade fitted into the MP600 with some wobble (app. 5mm back and forth) due to overfiling the notch. The wobble does not bother at all for a saw blade but with other tools a more precise fit would be recommended. The saw has a length of 6.5 cm which is the same length as the other "long" tools on the MP600 but sligtly shorter than saws on other brand MTs.

(The mini reamer is another small mod made from the smallest flat head driver)

... and of course a test of the saw - works great  :tu:

Merit Badges Must start a thread showing a photo of at least three BO tools Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with photos of your slasher/chopper/machete knives in use Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,991
Re: Fitting a SOG saw into the MP600
Reply #1 on: February 23, 2017, 12:14:54 AM
Nice job with that mod 8) So nice in fact I am going to award you the badge :D :tu: Congrats :cheers: :cheers: :like:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline ducttapetech

  • Zombie Apprentice
  • ********
    • Posts: 18,707
  • Whiskey Tango Foxtrot, over.
Re: Fitting a SOG saw into the MP600
Reply #2 on: February 23, 2017, 12:24:58 AM
Nice work!
Nate

SEND IT!
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with photos of your Mora knives in use Start a new thread with photos of your chainsaws Start a new thread with a photo showing the axe in use Test,please ignore Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread showing photos of your outdoor cooking Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms) Must buy something on EDCSource Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 67,564
Re: Fitting a SOG saw into the MP600
Reply #3 on: February 23, 2017, 01:13:22 AM
Great job !
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month.

dk Offline Troels

  • Sr. Member
  • ****
    • Posts: 434
Re: Fitting a SOG saw into the MP600
Reply #4 on: February 23, 2017, 11:22:54 AM
Thanks  :salute:
Merit Badges Must start a thread showing a photo of at least three BO tools Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with photos of your slasher/chopper/machete knives in use Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

ca Offline Grant Lamontagne

  • Head Turd Polisher
  • Administrator
  • *
  • Just Bananas
  • *
    • Posts: 65,935
  • Optimum instrumentum est inter aures
Re: Fitting a SOG saw into the MP600
Reply #5 on: February 25, 2017, 04:46:11 PM
That looks really cool!

Have you got any other mods in store for that MP600?

I love that SOG still sells components and that they can be adapted to fit other tools.

Def
Leave the dents as they are- let your belongings show their scars as proudly as you do yours.
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a thread with a photo of a repair you made with duct tape Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns) Start a thread with a photo of at least ten OPT's in your collection Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least eight BO tools Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread showing photos of your outdoor cooking Must have a review written in the proper format and posted on the Main Site Start a new thread with a photo of at least 5 different Charge models in your collection

Pages: 1   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $122.41
PayPal Fees: $6.85
Net Balance: $115.56
Below Goal: $184.44
Site Currency: USD
39% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal