Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


The PST 1.5.1 adding the saw

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,986
The PST 1.5.1 adding the saw
on: March 15, 2017, 08:30:18 PM
Well I have carried my PST 1.5 lately and finally made myself go and cut a SOG saw to fit into my PST :D

I have had it marked to cut for months :whistle:

20170315_115117 by Poncho 65, on Flickr

Compared to a couple other PST/PST II parts to see what needed to be cut away for sure :tu:

20170315_115320 by Poncho 65, on Flickr

I cut the back off and then went to making the pivot end match the factory PST end of this blade :tu:

20170315_122052 by Poncho 65, on Flickr

20170315_122103 by Poncho 65, on Flickr

20170315_122037 by Poncho 65, on Flickr

Next I took a diamond stone and a sanding block to clean it up and make the finish a bit smoother and more eye pleasing :D

20170315_122800 by Poncho 65, on Flickr

Next into the PST and see if it fits :think: Yep looks pretty good :tu: Now I mark the nail nick position with a Sharpie :cheers:

20170315_123359 by Poncho 65, on Flickr

Cut the nail nick in :tu:

20170315_123543 by Poncho 65, on Flickr

Now to see if it can cut :cheers:

20170315_124314 by Poncho 65, on Flickr

Tested and works :dd: Now to see the finished PST 1.5.1 :woohoo:

20170315_124037 by Poncho 65, on Flickr

And a comparison to the Rebar and it's saw :cheers:

20170315_124158 by Poncho 65, on Flickr
« Last Edit: March 16, 2017, 02:46:02 AM by Poncho65 »


us Online SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 67,551
Re: The PST 1.5.1 adding the saw
Reply #1 on: March 15, 2017, 11:32:07 PM
Great job Poncho  :like: :cheers: :tu:


us Offline pa_strunk

  • *
  • *
  • No Life Club
  • ******
    • Posts: 1,655
  • MAJ/APA
Re: The PST 1.5.1 adding the saw
Reply #2 on: March 15, 2017, 11:41:23 PM
Nice  :tu:
"Every generation has the obligation to free men's minds for a look at new worlds, to look out from a higher plateau than the last generation." Ellison Onizuka


nz Offline zoidberg

  • Global Moderator
  • Point Of No Return
  • *
    • Posts: 37,753
Re: The PST 1.5.1 adding the saw
Reply #3 on: March 15, 2017, 11:46:10 PM
Way to go Mr Poncho!   :tu:   :like:


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,986
Re: The PST 1.5.1 adding the saw
Reply #4 on: March 15, 2017, 11:51:05 PM
Thanks guys  :tu: I am going to try and carry it for a bit and see how it goes :cheers:


us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,284
  • Wooooo!
Re: The PST 1.5.1 adding the saw
Reply #5 on: March 16, 2017, 01:20:53 AM
Nicely done Poncho :tu:

Sent from my SM-G920R4 using Tapatalk

K-Tibbs


us Offline cody6268

  • Absolutely No Life Club
  • *******
    • Posts: 5,829
Re: The PST 1.5.1 adding the saw
Reply #6 on: March 16, 2017, 02:19:29 AM
Nice job!   That's something I want to do, but I haven't found a busted PST or PST II to do it to.  My PST II still works fine, and I see no reason to mess with it.   I'm thinking about trading an intact PST for a friend's which has had one of the plier pivots disappear (which was replaced with a nut and bolt).


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,986
Re: The PST 1.5.1 adding the saw
Reply #7 on: March 16, 2017, 02:44:42 AM
What started this was that I bid on a PST II and got it for cheap but the handles were messed up ::) and I also had a PST that I didn't care to take apart with a couple issues ;) :D

It is a very great EDC anyways and now it is more so with the saw :dd: Not really much else that I would need on it :think: Especially since I carry a SAK anyways :tu:


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,986
Re: The PST 1.5.1 adding the saw
Reply #8 on: March 16, 2017, 02:44:55 AM
Nicely done Poncho :tu:

Sent from my SM-G920R4 using Tapatalk

:hatsoff:


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,986
Re: The PST 1.5.1 adding the saw
Reply #9 on: March 16, 2017, 02:57:21 AM
Guess I could include the original thread were I started with this PST :think:

http://forum.multitool.org/index.php/topic,65702.0.html

Pietervn also did this mod a couple years ago and had I noticed his I wouldn't have had to cut the back off of mine :whistle: Guess I should have cut the pivot part first then tried it :facepalm: :rofl: Well I have another so I may give it another go :shrug:

http://forum.multitool.org/index.php/topic,48498.0.html


au Offline ReamerPunch

  • Thread Killer 2017
  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,234
  • Born to multitask.
Re: The PST 1.5.1 adding the saw
Reply #10 on: March 16, 2017, 07:11:07 PM
10/10  :tu:
How about a  :ahhh :ahhh :ahhh!!! MINI !!!  :ahhh :ahhh :ahhh saw?  :D


gb Offline Zed

  • *
  • Zombie Apprentice
  • ********
    • Posts: 19,555
Re: The PST 1.5.1 adding the saw
Reply #11 on: March 16, 2017, 08:01:53 PM
Cool mod  :salute:


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,986
Re: The PST 1.5.1 adding the saw
Reply #12 on: March 16, 2017, 08:53:04 PM
:ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh With a saw :dd: Now that is a great idea :D Not much you might be able to cut with it though  :think: :rofl:


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,986
Re: The PST 1.5.1 adding the saw
Reply #13 on: March 16, 2017, 08:53:55 PM


nz Offline zoidberg

  • Global Moderator
  • Point Of No Return
  • *
    • Posts: 37,753
Re: The PST 1.5.1 adding the saw
Reply #14 on: March 16, 2017, 08:54:32 PM
:ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh With a saw :dd: Now that is a great idea :D Not much you might be able to cut with it though  :think: :rofl:

Stop making excuses and get it done!   :pok:


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,986
Re: The PST 1.5.1 adding the saw
Reply #15 on: March 16, 2017, 09:03:45 PM
:ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh With a saw :dd: Now that is a great idea :D Not much you might be able to cut with it though  :think: :rofl:

Stop making excuses and get it done!   :pok:

Nearly have to be foldable to be able to cut anything :think: that or an inch and a half saw :ahhh :ahhh :ahhh :rofl:


nz Offline zoidberg

  • Global Moderator
  • Point Of No Return
  • *
    • Posts: 37,753
Re: The PST 1.5.1 adding the saw
Reply #16 on: March 16, 2017, 09:06:56 PM
:ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh With a saw :dd: Now that is a great idea :D Not much you might be able to cut with it though  :think: :rofl:

Stop making excuses and get it done!   :pok:

Nearly have to be foldable to be able to cut anything :think: that or an inch and a half saw :ahhh :ahhh :ahhh :rofl:

It would still be cool.   :D


nz Offline zoidberg

  • Global Moderator
  • Point Of No Return
  • *
    • Posts: 37,753
Re: The PST 1.5.1 adding the saw
Reply #17 on: March 16, 2017, 09:09:39 PM
You ever see the little blades I made for the Core?


nz Offline zoidberg

  • Global Moderator
  • Point Of No Return
  • *
    • Posts: 37,753
Re: The PST 1.5.1 adding the saw
Reply #18 on: March 16, 2017, 09:43:24 PM
Found a pic.



us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,986
Re: The PST 1.5.1 adding the saw
Reply #19 on: March 17, 2017, 02:21:48 AM
I had not seen those :o:like: them and they would both fit into the  :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh :D

Very cool 8) Thanks for the pic :tu:
« Last Edit: March 17, 2017, 02:23:32 AM by Poncho65 »


nz Offline zoidberg

  • Global Moderator
  • Point Of No Return
  • *
    • Posts: 37,753
Re: The PST 1.5.1 adding the saw
Reply #20 on: March 17, 2017, 04:38:58 AM
Don't know if they would fit, my mini went years ago.


au Offline pietervn

  • *
  • No Life Club
  • ******
    • Posts: 1,712
Re: The PST 1.5.1 adding the saw
Reply #21 on: March 18, 2017, 08:30:32 AM
Guess I could include the original thread were I started with this PST :think:

http://forum.multitool.org/index.php/topic,65702.0.html

Pietervn also did this mod a couple years ago and had I noticed his I wouldn't have had to cut the back off of mine :whistle: Guess I should have cut the pivot part first then tried it :facepalm: :rofl: Well I have another so I may give it another go :shrug:

http://forum.multitool.org/index.php/topic,48498.0.html

Nice mod, a saw seems to be lacking in the PST range. I like the shape you made it, I think Mr Harley will have something to say about the decapitation.  :D

If you do another, do the bottom bit first, that will show you how much needs to be taken off the top.

Cheers,

Pete


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,986
Re: The PST 1.5.1 adding the saw
Reply #22 on: March 19, 2017, 12:41:45 AM
Guess I could include the original thread were I started with this PST :think:

http://forum.multitool.org/index.php/topic,65702.0.html

Pietervn also did this mod a couple years ago and had I noticed his I wouldn't have had to cut the back off of mine :whistle: Guess I should have cut the pivot part first then tried it :facepalm: :rofl: Well I have another so I may give it another go :shrug:

http://forum.multitool.org/index.php/topic,48498.0.html

Nice mod, a saw seems to be lacking in the PST range. I like the shape you made it, I think Mr Harley will have something to say about the decapitation.  :D

If you do another, do the bottom bit first, that will show you how much needs to be taken off the top.

Cheers,

Pete

Thanks Peter :salute: Most definitely will do the pivot end first and then check for fit :D


us Offline sLaughterMed

  • *
  • No Life Club
  • ******
    • Posts: 3,450
  • Nothing's typical around here
Re: The PST 1.5.1 adding the saw
Reply #23 on: March 21, 2017, 08:34:26 PM
Nice mod Poncho!
Laughter is the best Medicine
Slaughter is just Laughter with an "S"

We are looking for Multitool Encyclopedia Editors! If you are interested, please give me a PM!

The Multitool Encyclopedia Editing for Dummies Page: http://forum.multitool.org/index.php/topic,65751.0.html
Multitool Encyclopedia Suggested Edits Page: http://forum.multitool.org/index.php/topic,65746.0.html


gr Offline firiki

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 6,076
  • Cats have pocket knives of their own
Re: The PST 1.5.1 adding the saw
Reply #24 on: March 21, 2017, 08:49:18 PM
Yup  :multi:
Omnia vincit amor. Vae victis.


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,986
Re: The PST 1.5.1 adding the saw
Reply #25 on: March 21, 2017, 09:19:19 PM
Thanks guys :hatsoff: I am very happy to have the saw in such a slim package as the PST :cheers: :like:


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,986
Re: The PST 1.5.1 adding the saw
Reply #26 on: April 03, 2017, 04:36:20 AM
Well I cut another saw for this MT ::) :D I was cutting another for my MP600 in this thread https://forum.multitool.org/index.php/topic,71276.0.html and decided to go ahead and cut both at the same time :cheers:

20170402_194103 by Poncho 65, on Flickr

I haven't installed it yet but when I do I will take pics ;) :D


us Online SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 67,551
Re: The PST 1.5.1 adding the saw
Reply #27 on: April 03, 2017, 05:47:34 AM
I like the narrower version better myself, less drag when cutting  :tu:


nz Offline zoidberg

  • Global Moderator
  • Point Of No Return
  • *
    • Posts: 37,753
Re: The PST 1.5.1 adding the saw
Reply #28 on: April 03, 2017, 05:59:59 AM
I like the narrower version better myself, less drag when cutting  :tu:

And it looks more like the Core saw which is cool.


nz Offline zoidberg

  • Global Moderator
  • Point Of No Return
  • *
    • Posts: 37,753
Re: The PST 1.5.1 adding the saw
Reply #29 on: April 03, 2017, 06:00:49 AM
You really need to install it so we can judge it.   :)


 

Donations

Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $122.41
PayPal Fees: $6.85
Net Balance: $115.56
Below Goal: $184.44
Site Currency: USD
39% 
April Donations

Community Links


Powered by EzPortal