SAK Modding Begginer Kit List

DeezNittles · **on:** July 19, 2017, 10:20:59 PM

After years of trying to acquire a Yeoman, I've decided to make one myself.

That being said, I currently lack the appropriate toolset to crack open a SAK and get to fiddling.

I was wondering if any esteemed forum member may be so kind as to list out the suggested tools for a beginning SAK modder?

Don Pablo · **Reply #1 on:** July 19, 2017, 10:27:40 PM

Files, hammer, pliers, vice?
A guide for 91mm:
https://forum.multitool.org/index.php/topic,9808.0.html
and a list of guides:
https://forum.multitool.org/index.php/topic,43303.0.html

See what tools and technique they use.

Don Pablo · **Reply #2 on:** July 19, 2017, 10:30:54 PM

Oh, dremel with drill bits, or a drill.

sLaughterMed · **Reply #3 on:** July 20, 2017, 05:55:27 PM

A vice with a small anvil is great for SAK modding, but if you don't have one, a large hammer clamped to a table works for peening brass pins, For the actual peening, you need a ball peen hammer, as well as a metal file and side or flush cutters for trimming the pin stock. a thin, sturdy knife works wonders for prying scales off celidor SAKs.