Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


3D printed 91mm scales GAW

an0nemus · 86 · 3087
« previous next »
Pages: 1 2 3   Go Down

ph Offline an0nemus

  • *
  • No Life Club
  • ******
    • Posts: 2,717
  • I Tool Therefore I Am
3D printed 91mm scales GAW
on: September 16, 2017, 04:28:29 AM
My first GAW, wohoo! As a way of showing my appreciation to this awesome community, I'm holding this modest giveaway. I recently organized a group buy to have Remade Knives publicly released 3D design of its 91mm scales printed locally in my country (Philippines). A few brave guinea pigs joined me and I can say were ecstatic by the results! Grey and Black 91mm scales were printed and claimed to be carbon fiber and ABS by the guy who printed for us.

I have actually reserved 1 set of each color to be an MTO GAW  :MTO:

Rules are simple:

1. Anyone with more than 100 posts is qualified

2. Just post in this thread what 91mm SAK will you possibly use these scales on

3. Winner will be drawn randomly next weekend

4. Shipping will take quite awhile though as it won't via air  :-[

Good luck to everyone who will join  :tu:

 
« Last Edit: September 16, 2017, 06:00:34 AM by an0nemus »
Merit Badges Participants shall carry and use one Soldier knife, the model of their choosing, for the duration of the 90 days and post a picture each day. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a SAK-alike, aka multi-layered, knife-based pocket tools for thirty (30) consecutive days. Must start a thread with a photo of your birth year SAK Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with a photo showing the Hook in use Start a new thread with photos of your zip ties in use

br Offline BleaKrytE

  • *
  • Sr. Member
  • ****
    • Posts: 430
  • Hello world. I'm Vinícius!
Re: 3D printed 91mm scales GAW
Reply #1 on: September 16, 2017, 04:43:41 AM
They look great! If I won, I'd use them on my Super Tinker, its scales as kinda beat hahah


Enviado do meu iPhone usando Tapatalk
Uni student, environmental activist (yes, I'm that annoying guy that mentions climate change every third minute), motorcyclist.
Merit Badges Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your zip ties in use Start a new thread with a photo showing the Hook in use

us Offline ironraven

  • *
  • No Life Club
  • ******
    • Posts: 3,071
  • American Clandestine Materials Executive (ACME)
Re: 3D printed 91mm scales GAW
Reply #2 on: September 16, 2017, 05:03:27 AM
While it might cost me the pen, the scales on my EDC Compact are gouged, scratched, and in one place I think they are a little melted.
"Even if it is only the handful of people I meet on the street, or in my home, I can still protect them with this one sword" Kenshin Himura

Necessity is the mother of invention. If you're not ready, it's "a mother". If you are, it's "mom".

"I love democracy" Sheev Palpatine, upon his election to Chancellor.

id Offline jaya_man

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,012
Re: 3D printed 91mm scales GAW
Reply #3 on: September 16, 2017, 05:26:00 AM
Wow... Thanks for the GAW opportunity an0nemus...

I think I would have to build one from leftover parts for this set of scales :facepalm:


Sent from my iPhone using Tapatalk
Merit Badges Must start a thread showing a photo of at least five BO tools You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. Start a thread with photos of at least twelve different colored ALOX models in your collection Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Must start a thread with a photo of at least five (5) of your watches Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must start a thread with a photo of your stayglow SAK Must start a thread with a photo of your birth year SAK Must start a thread with a photo of your camo SAK Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the copper flashlight for thirty (30) consecutive days. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread demonstrating paracord knot tying Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of your custom ALOX with scissors Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge.

00 Offline Mechanickal

  • *
  • Zombie Apprentice
  • ********
    • Posts: 14,686
Re: 3D printed 91mm scales GAW
Reply #4 on: September 16, 2017, 07:55:57 AM
Finaly! :rofl:

Thanks for the neat GAW.

I'd probably put the scales on a Cybertool 34 which is in desperate need of a set.

:cheers:
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread with a photo of your stayglow SAK Start a new thread with a photo showing the Hook in use Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your Buck knives in use Must put something in order and provide link to the post. Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Start a new thread with photos of your chainsaws Start a new thread with photos of your titanium gear with a multitool or sak Test,please ignore Must start a thread with a photo of your birth year SAK Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of a flashlight as part of your EDC

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,013
Re: 3D printed 91mm scales GAW
Reply #5 on: September 16, 2017, 12:00:24 PM
Wow thanks for the GAW :cheers: and the chance :like:

I have an older Champion that I plan to take apart and make a bit smaller and mayber bladeless :think: that is what they would go on :like: :like:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

wales Offline magentus

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,386
  • mmmmm SAKrelicious
Re: 3D printed 91mm scales GAW
Reply #6 on: September 16, 2017, 12:09:23 PM
Great GAW! Thanks. I'm in and would put them on a bladeless mod Pabs has got me thinking about.  :tu:
'Use the force Harry' - Gandalf
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Test,please ignore Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo showing the Hook in use Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

pt Offline pfrsantos

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,214
  • Oxygen and magnesium toghether?! OMg!
Re: 3D printed 91mm scales GAW
Reply #7 on: September 16, 2017, 12:28:42 PM
Great GAW! Thanks for the chance!
 :cheers: :salute:

Those scales look pretty tough and resistant. I'd probably put them on my Climber, so I wouldn't be afraid to EDC it all the time in case I'd scratch the original scales.
 8) 8)

________________________________
It is just a matter of time before they add the word “Syndrome” after my last name.

I don't have OCD, I have OCDEFGHIJKLMNOPQRSTUVWXYZ.

I'd give my right arm to be ambidextrous.

Eff the ineffable, scrut the inscrutable.

IYCRTYSWTMTFOT


se Offline RF52

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,772
Re: 3D printed 91mm scales GAW
Reply #8 on: September 16, 2017, 12:37:54 PM
Cool! I would put them on my explorer.

Sent fra min PLK-L01 via Tapatalk

Merit Badges Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Participate  in Challenge thread and post a photo of a Explorer SAK for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a 'folding hunter' knife that isn't a Buck 110 for thirty (30) consecutive days. Participants shall carry and use one Soldier knife, the model of their choosing, for the duration of the 90 days and post a picture each day. Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Must start a thread with a photo of your camo SAK Participate and contribute in Challenge thread and post a photo of either an Axe, MT/Folding knife or Fixed blade (picked at the beginning of challenge) for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a Spyderco knife for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the multitool for seven (7) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread with photos of your slasher/chopper/machete knives in use Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

ph Offline an0nemus

  • *
  • No Life Club
  • ******
    • Posts: 2,717
  • I Tool Therefore I Am
Re: 3D printed 91mm scales GAW
Reply #9 on: September 16, 2017, 03:00:26 PM
Thanks to those who are joining! I so wish I can send sets to all.


For those not familiar with this project, here's a link to the thread:


https://forum.multitool.org/index.php/topic,73784.0.html


Keep em coming!  :2tu:
Merit Badges Participants shall carry and use one Soldier knife, the model of their choosing, for the duration of the 90 days and post a picture each day. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a SAK-alike, aka multi-layered, knife-based pocket tools for thirty (30) consecutive days. Must start a thread with a photo of your birth year SAK Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with a photo showing the Hook in use Start a new thread with photos of your zip ties in use

us Offline dbeeks1

  • *
  • Full Member
  • ***
    • Posts: 141
Re: 3D printed 91mm scales GAW
Reply #10 on: September 16, 2017, 06:06:10 PM
Those look cool! Thanks for the chance to win a set!
I would probably put them on the Cyber Yeoman I put together.

us Offline lichan

  • Sr. Member
  • ****
    • Posts: 397
Re: 3D printed 91mm scales GAW
Reply #11 on: September 16, 2017, 07:39:39 PM
Thanks for doing this GAW. I have a 91mm Tinker that I bought at a flea market for $1 that was missing 1 scale so that would be a perfect candidate for these.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo showing the Hook in use Must start a thread with a photo of your EDC watch

it Offline Mini

  • *
  • Hero Member
  • *****
    • Posts: 747
Re: 3D printed 91mm scales GAW
Reply #12 on: September 16, 2017, 10:40:29 PM
Thanks for the GAW!

I think my vic ranger will be a good choice for that scales :)
Merit Badges Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

us Offline Zhenchok

  • *
  • Sr. Member
  • ****
    • Posts: 418
Re: 3D printed 91mm scales GAW
Reply #13 on: September 18, 2017, 01:29:09 AM
Thank you for the GAW,  I have an eco scale spartan that could really use a new set of scales. 


Sent from my iPhone using Tapatalk
“All human beings have three lives: public, private, and secret.” ― Gabriel García Márquez

ie Offline Don Pablo

  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,292
  • Yoo-hoo, big summer blowout!
Re: 3D printed 91mm scales GAW
Reply #14 on: September 18, 2017, 02:28:21 AM
Quote from: Poncho65 on September 16, 2017, 12:00:24 PM
Wow thanks for the GAW :cheers: and the chance :like:

I have an older Champion that I plan to take apart and make a bit smaller and mayber bladeless :think: that is what they would go on :like: :like:
Quote from: magentus on September 16, 2017, 12:09:23 PM
Great GAW! Thanks. I'm in and would put them on a bladeless mod Pabs has got me thinking about.  :tu:
What have I wrought?  :ahhh :ahhh
Hooked, like everyone else. ;)

All hail the hook!
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days.

ca Offline Toolslinger

  • Thread Killer 2015
  • *
  • No Life Club
  • ******
    • Posts: 2,453
  • Ser Tool the Slinger, The Tool That Rides
Re: 3D printed 91mm scales GAW
Reply #15 on: September 18, 2017, 11:44:27 AM
Cool GAW! Thanks for the chance. :cheers:

I'd add them to my Trailguide as that SAK sees the most pocket time.

wales Offline magentus

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,386
  • mmmmm SAKrelicious
Re: 3D printed 91mm scales GAW
Reply #16 on: September 18, 2017, 11:49:04 AM
Quote from: Pablo O'Brien on September 18, 2017, 02:28:21 AM
Quote from: Poncho65 on September 16, 2017, 12:00:24 PM
Wow thanks for the GAW :cheers: and the chance :like:

I have an older Champion that I plan to take apart and make a bit smaller and mayber bladeless :think: that is what they would go on :like: :like:
Quote from: magentus on September 16, 2017, 12:09:23 PM
Great GAW! Thanks. I'm in and would put them on a bladeless mod Pabs has got me thinking about.  :tu:
What have I wrought?  :ahhh :ahhh
Gonna be called the Pabsman and will have to live in my pocket  :D  :tu:
'Use the force Harry' - Gandalf
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Test,please ignore Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo showing the Hook in use Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

00 Offline Mechanickal

  • *
  • Zombie Apprentice
  • ********
    • Posts: 14,686
Re: 3D printed 91mm scales GAW
Reply #17 on: September 18, 2017, 12:32:35 PM
Quote from: magentus on September 18, 2017, 11:49:04 AM
Quote from: Pablo O'Brien on September 18, 2017, 02:28:21 AM
Quote from: Poncho65 on September 16, 2017, 12:00:24 PM
Wow thanks for the GAW :cheers: and the chance :like:

I have an older Champion that I plan to take apart and make a bit smaller and mayber bladeless :think: that is what they would go on :like: :like:
Quote from: magentus on September 16, 2017, 12:09:23 PM
Great GAW! Thanks. I'm in and would put them on a bladeless mod Pabs has got me thinking about.  :tu:
What have I wrought?  :ahhh :ahhh
Gonna be called the Pabsman and will have to live in my pocket  :D  :tu:
Just don't put it next to another SAK or it will come out with a bended can opener...
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread with a photo of your stayglow SAK Start a new thread with a photo showing the Hook in use Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your Buck knives in use Must put something in order and provide link to the post. Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Start a new thread with photos of your chainsaws Start a new thread with photos of your titanium gear with a multitool or sak Test,please ignore Must start a thread with a photo of your birth year SAK Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of a flashlight as part of your EDC

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,013
Re: 3D printed 91mm scales GAW
Reply #18 on: September 18, 2017, 01:45:04 PM
Quote from: Mechanickal on September 18, 2017, 12:32:35 PM
Quote from: magentus on September 18, 2017, 11:49:04 AM
Quote from: Pablo O'Brien on September 18, 2017, 02:28:21 AM
Quote from: Poncho65 on September 16, 2017, 12:00:24 PM
Wow thanks for the GAW :cheers: and the chance :like:

I have an older Champion that I plan to take apart and make a bit smaller and mayber bladeless :think: that is what they would go on :like: :like:
Quote from: magentus on September 16, 2017, 12:09:23 PM
Great GAW! Thanks. I'm in and would put them on a bladeless mod Pabs has got me thinking about.  :tu:
What have I wrought?  :ahhh :ahhh
Gonna be called the Pabsman and will have to live in my pocket  :D  :tu:
Just don't put it next to another SAK or it will come out with a bended can opener...

 :rofl:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,013
Re: 3D printed 91mm scales GAW
Reply #19 on: September 18, 2017, 01:46:16 PM
Quote from: Pablo O'Brien on September 18, 2017, 02:28:21 AM
Quote from: Poncho65 on September 16, 2017, 12:00:24 PM
Wow thanks for the GAW :cheers: and the chance :like:

I have an older Champion that I plan to take apart and make a bit smaller and mayber bladeless :think: that is what they would go on :like: :like:
Quote from: magentus on September 16, 2017, 12:09:23 PM
Great GAW! Thanks. I'm in and would put them on a bladeless mod Pabs has got me thinking about.  :tu:
What have I wrought?  :ahhh :ahhh

Main blade is already broke and the tip of the small one is gone ;) I had the plan to go bladeless with it for a while :salute: :D
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

ie Offline Don Pablo

  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,292
  • Yoo-hoo, big summer blowout!
Re: 3D printed 91mm scales GAW
Reply #20 on: September 18, 2017, 02:19:36 PM
Quote from: Poncho65 on September 18, 2017, 01:45:04 PM
Quote from: Mechanickal on September 18, 2017, 12:32:35 PM
Quote from: magentus on September 18, 2017, 11:49:04 AM
Quote from: Pablo O'Brien on September 18, 2017, 02:28:21 AM
Quote from: Poncho65 on September 16, 2017, 12:00:24 PM
Wow thanks for the GAW :cheers: and the chance :like:

I have an older Champion that I plan to take apart and make a bit smaller and mayber bladeless :think: that is what they would go on :like: :like:
Quote from: magentus on September 16, 2017, 12:09:23 PM
Great GAW! Thanks. I'm in and would put them on a bladeless mod Pabs has got me thinking about.  :tu:
What have I wrought?  :ahhh :ahhh
Gonna be called the Pabsman and will have to live in my pocket  :D  :tu:
Just don't put it next to another SAK or it will come out with a bended can opener...

 :rofl:
:facepalm:

I have never ever ever ever bent a can opener!

Show content
...It was the BOTTLE opener.  >:D
Hooked, like everyone else. ;)

All hail the hook!
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days.

00 Offline Mechanickal

  • *
  • Zombie Apprentice
  • ********
    • Posts: 14,686
Re: 3D printed 91mm scales GAW
Reply #21 on: September 18, 2017, 02:43:04 PM
Quote from: Pablo O'Brien on September 18, 2017, 02:19:36 PM
Quote from: Poncho65 on September 18, 2017, 01:45:04 PM
Quote from: Mechanickal on September 18, 2017, 12:32:35 PM
Quote from: magentus on September 18, 2017, 11:49:04 AM
Quote from: Pablo O'Brien on September 18, 2017, 02:28:21 AM
Quote from: Poncho65 on September 16, 2017, 12:00:24 PM
Wow thanks for the GAW :cheers: and the chance :like:

I have an older Champion that I plan to take apart and make a bit smaller and mayber bladeless :think: that is what they would go on :like: :like:
Quote from: magentus on September 16, 2017, 12:09:23 PM
Great GAW! Thanks. I'm in and would put them on a bladeless mod Pabs has got me thinking about.  :tu:
What have I wrought?  :ahhh :ahhh
Gonna be called the Pabsman and will have to live in my pocket  :D  :tu:
Just don't put it next to another SAK or it will come out with a bended can opener...

 :rofl:
:facepalm:

I have never ever ever ever bent a can opener!

Show content
...It was the BOTTLE opener.  >:D
If you can bent a cap lifter, you sure can bend a narrower cap lifter too :twak:
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread with a photo of your stayglow SAK Start a new thread with a photo showing the Hook in use Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your Buck knives in use Must put something in order and provide link to the post. Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Start a new thread with photos of your chainsaws Start a new thread with photos of your titanium gear with a multitool or sak Test,please ignore Must start a thread with a photo of your birth year SAK Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of a flashlight as part of your EDC

wales Offline magentus

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,386
  • mmmmm SAKrelicious
Re: 3D printed 91mm scales GAW
Reply #22 on: September 18, 2017, 02:45:26 PM
Challenge accepted Pabs Hun?
'Use the force Harry' - Gandalf
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Test,please ignore Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo showing the Hook in use Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

fr Offline m47mu74nt

  • *
  • No Life Club
  • ******
    • Posts: 2,208
Re: 3D printed 91mm scales GAW
Reply #23 on: September 18, 2017, 03:10:57 PM
Great idea of GAW, there is an unscaled Compact somewhere here that would be happy to get one of these  :climber:
Meet me also on youtube & instagram for mostly knives (and multitools) content
Merit Badges Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Carry an orange item and post a picture of it everyday for 30 days. Participate and post a pic of your vintage SAK (1986 or earlier) everyday for 30 days.  Carry tools with single functions only. No multi-tools, no multi-layer Swiss Army Knives, no combo one-piece tools and post a photo for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a thread with photos of at least twelve different colored ALOX models in your collection  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread with a photo showing the Hook in use Must start a thread with a photo of your birth year SAK Start a new thread with pictures of a Fish Scaler in use Start a new thread with photos of your zip ties in use Must start a thread with a photo of your stayglow SAK Must start a thread with a photo of your camo SAK Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days.

ie Offline Don Pablo

  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,292
  • Yoo-hoo, big summer blowout!
Re: 3D printed 91mm scales GAW
Reply #24 on: September 18, 2017, 03:51:35 PM
My tool bending days are over.  :angel:
Hooked, like everyone else. ;)

All hail the hook!
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days.

wales Offline magentus

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,386
  • mmmmm SAKrelicious
Re: 3D printed 91mm scales GAW
Reply #25 on: September 18, 2017, 03:59:16 PM
Quote from: Pablo O'Brien on September 18, 2017, 03:51:35 PM
My tool bending days are over.  :angel:
He types whilst admitting wrangling tools on another thread  :pok:
'Use the force Harry' - Gandalf
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Test,please ignore Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo showing the Hook in use Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

00 Offline Mechanickal

  • *
  • Zombie Apprentice
  • ********
    • Posts: 14,686
Re: 3D printed 91mm scales GAW
Reply #26 on: September 18, 2017, 05:00:59 PM
Quote from: magentus on September 18, 2017, 03:59:16 PM
Quote from: Pablo O'Brien on September 18, 2017, 03:51:35 PM
My tool bending days are over.  :angel:
He types whilst admitting wrangling tools on another thread  :pok:
He's still in denial... :cry:
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread with a photo of your stayglow SAK Start a new thread with a photo showing the Hook in use Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your Buck knives in use Must put something in order and provide link to the post. Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Start a new thread with photos of your chainsaws Start a new thread with photos of your titanium gear with a multitool or sak Test,please ignore Must start a thread with a photo of your birth year SAK Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of a flashlight as part of your EDC

us Offline Alan K.

  • Thread Killer 2019
  • *
  • Absolutely No Life Club
  • *******
    • Posts: 6,632
Re: 3D printed 91mm scales GAW
Reply #27 on: September 18, 2017, 05:03:40 PM
It took me a few days to decide that I should enter this.  Thanks for the generous offer. I would put these scales on my Mountaineer because it has someone else's name on it and is missing the T&T anyway. 
« Last Edit: September 18, 2017, 05:04:54 PM by Alan K. »
Merit Badges Participate in a Challenge thread and post a photo of  a Opinel  knife  for 30 days Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Start a new thread and post a photo of your gear for thirty (30) consecutive days. You must carry at least one item from every category of the gear list every day. Start a new thread and post a photo of the pen for thirty (30) consecutive days. Participate in a challenge by carrying  a Combo Edged knife or Multitool and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Delemont SAK for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a SAK-alike, aka multi-layered, knife-based pocket tools for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Participate  in Challenge thread and post a photo of an Old Cross SAK for thirty (30) consecutive days. Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Participate in a Challenge thread and post a photo of a 'folding hunter' knife that isn't a Buck 110 for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in Challenge thread and post a photo of your EDC or a component of the EDC that got used during the course of the day for thirty (30) consecutive days.

pt Offline pfrsantos

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,214
  • Oxygen and magnesium toghether?! OMg!
Re: 3D printed 91mm scales GAW
Reply #28 on: September 18, 2017, 08:01:27 PM
Quote from: Mechanickal on September 18, 2017, 05:00:59 PM
Quote from: magentus on September 18, 2017, 03:59:16 PM
Quote from: Pablo O'Brien on September 18, 2017, 03:51:35 PM
My tool bending days are over.  :angel:
He types whilst admitting wrangling tools on another thread  :pok:
He's still in denial... :cry:

So, he took the Uzzie Boatzzle to Africa, then?
 :whistle:
________________________________
It is just a matter of time before they add the word “Syndrome” after my last name.

I don't have OCD, I have OCDEFGHIJKLMNOPQRSTUVWXYZ.

I'd give my right arm to be ambidextrous.

Eff the ineffable, scrut the inscrutable.

IYCRTYSWTMTFOT


ie Offline Don Pablo

  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,292
  • Yoo-hoo, big summer blowout!
Re: 3D printed 91mm scales GAW
Reply #29 on: September 18, 2017, 08:25:11 PM
Quote from: pfrsantos on September 18, 2017, 08:01:27 PM
Quote from: Mechanickal on September 18, 2017, 05:00:59 PM
Quote from: magentus on September 18, 2017, 03:59:16 PM
Quote from: Pablo O'Brien on September 18, 2017, 03:51:35 PM
My tool bending days are over.  :angel:
He types whilst admitting wrangling tools on another thread  :pok:
He's still in denial... :cry:

So, he took the Uzzie Boatzzle to Africa, then?
 :whistle:
:facepalm:
Hooked, like everyone else. ;)

All hail the hook!
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days.

Pages: 1 2 3   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $152.99
PayPal Fees: $8.68
Net Balance: $144.31
Below Goal: $155.69
Site Currency: USD
48% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal