Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Blade Exchanger Thoughts

Yontz · 6 · 6012
« previous next »
Pages: 1   Go Down

us Offline Yontz

  • Newbie
  • *
    • Posts: 16
Blade Exchanger Thoughts
on: September 28, 2017, 06:52:42 PM
Just curious, what blades has everyone used and why in your blade exchanger? I have a Surge and really like the idea of being able to swap blades out. I'm picking a couple up this weekend to throw in the pouch.
Leatherman Micra, Leatherman Surge

nz Offline zoidberg

  • Point Of No Return
  • **********
    • Posts: 37,929
Re: Blade Exchanger Thoughts
Reply #1 on: September 28, 2017, 10:03:19 PM
I use Bosch T-Shank Jigsaw Blades with a small Heat-Shrink shim so they fit properly.
I like the basic wood and metal multi packs with a mix of long and short blades.
I cut a little off the short ones so they can be stored in the Surge and the longer blades go in the day pack.

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,434
Re: Blade Exchanger Thoughts
Reply #2 on: September 29, 2017, 09:58:24 AM
Same as zoidberg for blade choice, plus some speSmurfpillsed Bosch metal blades and one no-name diamond blade (just in case...), without the heatshrink shims (my Surge exchanger has the anti-wobble spring and I haven't felt the need to use shims yet) and the cutting off.. I keep the blades separate in my travel tool kit to complement the Surge, ST300VX, Charge+'Tofty'*) or Wave+'Tofty'*) or (if carrying a SAK) a small loose jigsaw handle.
*) 'Tofty' = Tofty's jigsaw holder adaptor for Charge or Wave, clips in where the removable pocket clip or lanyard ring normally goes - I have not tested this yet with any serious sawing though. See posts in related owner club's threads and/or search for Tofty.
Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your zip ties in use Must start a thread showing a photo of at least three BO tools Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

us Offline Aloha

  • Global Moderator
  • *
  • Point Of No Return
  • *
    • Posts: 31,235
Re: Blade Exchanger Thoughts
Reply #3 on: September 29, 2017, 06:57:19 PM
Adding in a compliment of saw for different materials takes the Surge to the "next level" in my opinion.  I've pretty added a good metal cutting saw blade as well as pvc and aluminum cutting blades.   Sure a good hack saw can cut those materials but the saws are thin and small enough to add a few.  I also have one longer wood blade thats probably much to long for the tool but its worked out ok and I really only used it once.  The new Surge seems to have kept blade wobble down if not eliminated it.
Esse Quam Videri
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least eight BO tools Start a new thread showing photos of your outdoor cooking Must have a review written in the proper format and posted on the Main Site Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with photos of camping, including those showing preferred camping equipment Start a thread with photos of at least 5 different Juice models in your collection Start a thread with a photo of at least ten OPT's in your collection Start a new thread with photos of a Japanese made PST in your collection

us Offline Yontz

  • Newbie
  • *
    • Posts: 16
Re: Blade Exchanger Thoughts
Reply #4 on: October 01, 2017, 12:35:13 AM
Picked up a couple metal blades and a 30 grit ceramic/glass blade at Lowe’s today. I can’t imagine why I need a 30  grit ceramic/glass blade but I didn’t have one so...
Leatherman Micra, Leatherman Surge

us Offline gerleatherberman

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,565
  • Man of Multiple MultiTool Manufacturers
Re: Blade Exchanger Thoughts
Reply #5 on: October 01, 2017, 04:57:39 AM
Quote from: Yontz on October 01, 2017, 12:35:13 AM
Picked up a couple metal blades and a 30 grit ceramic/glass blade at Lowe’s today. I can’t imagine why I need a 30  grit ceramic/glass blade but I didn’t have one so...
Better to have it and not need it than to need it and not have it. :multi:
That is why I could never do minimal carry like some people do. :tu:
Pontificating particularly pious positions pertaining to polymorphic paraphernalia. G-Man.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of at least 5 different Charge models in your collection Start a new thread and post a photo of the multitool for seven (7) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your astronomy gear with a multitool Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with photos of your Buck knives in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Start a thread with photos of at least 5 different MP600 models in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must buy an item through the MTo Store

Pages: 1   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
May Goal: $300.00
Due Date: May 31
Total Receipts: $55.09
PayPal Fees: $3.15
Net Balance: $51.94
Below Goal: $248.06
Site Currency: USD
17% 
May Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal