Edit: this begs for a post in the Showcase thread
Just to close this thread and to say be big THANK-YOU to Pietervn, for supplying a MUT saw blade, I will be starting a thread showing the mod soon.
As you are probably aware from my previous post I wanted to change out the serrated blade for a saw blade, another member was kind enough to supply me with a blade from a MUT (Image removed from quote.)Pin removed and it all came apart, I was surprised the the blade had 2 copper washer but the scissors only had the one.(Image removed from quote.)The two blades lined up so I could see how much metal had to be removed (Image removed from quote.)Getting there(Image removed from quote.)Looks about right (Image removed from quote.)Here's a before(Image removed from quote.)And after (Image removed from quote.)Next came the de-dent to hold it shut as it was on the wrong side, I put a blob of black pen on the blade where I thought it should be, installed the blade and opened and closed it a couple of times to make the mark. (Image removed from quote.) Then grind it out gently with a pencil grinder and carbide bit, not as neat as I would like but it won't be seen anyway. (Image removed from quote.)All reassembled, as it came apart, and with a dab of lock-tight on the thread so it won't come apart during use.(Image removed from quote.)(Image removed from quote.)(Image removed from quote.)And it even sits central in the slot. (Image removed from quote.)All in all it took me about 1 1/2 hours, so a nice quick and easy mod.
Nice job on both accounts, taropal, looks really useful; and the Wave file in the blade exchanger... !