[CLOSED] Tools for sale.

Aloha · **on:** January 08, 2018, 01:36:09 AM

I have a few tools for sale. All sales include shipping within the CONUS. Shipping anywhere else is at buyers cost.
Please keep in mind non of these tool are collector items and would do best as users or mod fodder.

Buck 360 $40. Tool is used and came to me in the condition shown. The only thing I did was give it a clean. The implements all look good with no damage.

Charge XTi $85. Tool is used. I have yet to clean it and will do so. One plier rest is missing

. They were really thin on this model for some reason unlike my TTi. As a result the pliers on that side get hung up on the large bit holder which means a little tweak to close will be needed. The implements are all in good shape with the exception of the serrated blade. Oddly this blade shows the most wear tho very usable. I'll sharpen the main blade ( 154CM ) to hair popping sharp. I'll also touch up the serrated blade as well. I didn't take picture of the OHO tools cause they really needs a cleaning ( lots of gunk ). Both saw and file ( diamond/regular ) have a lot of life as does this whole tool. Bummer about the plier rest.

Pulse $50. Tool is used with a name very lightly etched on one side. I can remove the name easily if you'd like. This tool is in good condition. All implements are in really nice shape. Looks lightly used certainly not abused.

SOG Powerlock BO $50. Tool is used but in really good condition with exception to the main blade. It has a slight bend at the tip

. Nothing terrible but I wont bend it back. The BO throughout is nice and the tool is smooth as butter. Other than the main blade the tool looks lightly used. All implements are in perfect working order.

I have 2 PST2/s available that I will take pictures of later. One isn't marked PST2 that show use but no abuse. The diamond file doesn't have the hook groove on this tool. The implements look good with most wear on the blade. Plenty of life left in it overall.

The one marked PST2 is looser that the previous one but in about the same condition. This one does have the hook groove in the diamond file. As with the first one this one too needs a good cleaning ( gunk ). I will also sharpen both blades as they could use a refresh.
I'd like $35/ea. I'll post pictures once I get them up to snuff.

Thanks for looking. I'll take more pictures of the XTi once I get the OHO tools cleaned. I will also follow up with futures of both PST2s once they are cleaned.

Aloha · **Reply #1 on:** January 08, 2018, 01:36:55 AM

Pictures.

Aloha · **Reply #2 on:** January 08, 2018, 01:37:41 AM

Pictures.

Aloha · **Reply #3 on:** January 08, 2018, 01:38:48 AM

Pictures.

Aloha · **Reply #4 on:** January 08, 2018, 01:39:11 AM

Pictures.

pietervn · **Reply #5 on:** January 08, 2018, 08:58:45 AM

G'Day Aloha

I'll take the PST II marked PST II please.

PM Sent

Pete

ReamerPunch · **Reply #6 on:** January 08, 2018, 12:30:40 PM

Looking at that Bucktool. PM sent.
Pete, what would you say were I to suggest we combine items in one package to save on shipping?

Aloha · **Reply #7 on:** January 08, 2018, 04:31:43 PM

Replied to both PMs. Thank you fellas.

pietervn · **Reply #8 on:** January 08, 2018, 11:36:54 PM

Quote from: ReamerPunch on January 08, 2018, 12:30:40 PM

Looking at that Bucktool. PM sent.
Pete, what would you say were I to suggest we combine items in one package to save on shipping?

I'm happy with that if Aloha will accommodate it.

Cheers, Pete

Aloha · **Reply #9 on:** January 08, 2018, 11:41:40 PM

Quote from: pietervn on January 08, 2018, 11:36:54 PM

Quote from: ReamerPunch on January 08, 2018, 12:30:40 PM
Looking at that Bucktool. PM sent.
Pete, what would you say were I to suggest we combine items in one package to save on shipping?

I'm happy with that if Aloha will accommodate it.

Cheers, Pete

Sounds good to me gents.

Aloha · **Reply #10 on:** February 16, 2018, 11:19:59 PM

Here are additional pictures of the SOG and XTi. Like I said the SOG main blade is slightly bent. I tried to capture the bend but its nothing that should cause issue however you decide. The XTi main blade towards the tip look rough, look like a bad attempt at sharpening.

Added is the Flair. I'd like $55.

Aloha · **Reply #11 on:** February 16, 2018, 11:20:54 PM

Aloha · **Reply #12 on:** February 16, 2018, 11:23:00 PM

Aloha · **Reply #13 on:** February 16, 2018, 11:23:46 PM

Aloha · **Reply #14 on:** February 16, 2018, 11:24:35 PM

Flair $55

Aloha · **Reply #15 on:** February 16, 2018, 11:25:41 PM

Aloha · **Reply #16 on:** February 16, 2018, 11:26:57 PM

The only "issue" is the inside handle. All I did was wipe the tool down and spray with WD40.

Aloha · **Reply #17 on:** February 16, 2018, 11:29:49 PM

Skeletool RX complete with both bits $60

Aloha · **Reply #18 on:** February 16, 2018, 11:39:25 PM

PST2 unmarked.

Aloha · **Reply #19 on:** February 16, 2018, 11:40:09 PM

Aloha · **Reply #20 on:** February 16, 2018, 11:40:53 PM

Aloha · **Reply #21 on:** February 16, 2018, 11:42:42 PM

UPDATE.

Charge XTi $80. Tool is used. One plier rest is missing

. They were really thin on this model for some reason unlike my TTi. Main blade needs some love.

Pulse $50. ~~Tool is used with a name very lightly etched on one side.~~ I removed the name. This tool is in good condition. All implements are in really nice shape. Looks lightly used certainly not abused.

SOG Powerlock BO $50. Tool is used but in really good condition with exception to the main blade. It has a slight bend at the tip

. Nothing terrible but I wont bend it back. The BO throughout is nice and the tool is smooth as butter. Other than the main blade the tool looks lightly used. All implements are in perfect working order.

PST2 not marked. The diamond file doesn't have the hook groove on this tool. The implements look good with most wear on the blade. I'd like $35.

Flair $55.

Skeletool RX $60.

chrono · **Reply #22 on:** February 17, 2018, 12:36:32 AM

Quote from: Aloha007 on February 16, 2018, 11:42:42 PM

UPDATE.

Charge XTi $80. Tool is used. One plier rest is missing . They were really thin on this model for some reason unlike my TTi. Main blade needs some love.

Pulse $50. ~~Tool is used with a name very lightly etched on one side.~~ I removed the name. This tool is in good condition. All implements are in really nice shape. Looks lightly used certainly not abused.

SOG Powerlock BO $50. Tool is used but in really good condition with exception to the main blade. It has a slight bend at the tip . Nothing terrible but I wont bend it back. The BO throughout is nice and the tool is smooth as butter. Other than the main blade the tool looks lightly used. All implements are in perfect working order.

PST2 not marked. The diamond file doesn't have the hook groove on this tool. The implements look good with most wear on the blade. I'd like $35.

Flair $55.

Skeletool RX $60.

You may want to send that XTi in for warranty claim. I had a 1st production Ti in similar situation. It annoyed the heck out of me, as I could not close the tool with a bit in the driver. I finally sent it in, and got a Tti in return.

Aloha · **Reply #23 on:** February 17, 2018, 01:56:57 AM

I figured they'd send me TTi but I was hoping someone would want a XTi. The new owner could send it in if later they decided the missing plier rest was too annoying. Worse case they'd end up with a TTi not bad for $80 IMO.

Aloha · **Reply #24 on:** February 22, 2018, 10:31:32 PM

Off to the bay of fleas. Please close. Thank you all for looking.

Hello Lurker! Remove this ad and much more by logging in.

[CLOSED] Tools for sale.

Donations

Community Links