Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


T-shank jigsaw holder - does it only exist on the Surge?

ReamerPunch · 52 · 11785
« previous next »
Pages: 1 2   Go Down

gb Offline John Worledge

  • Newbie
  • *
    • Posts: 23
  • Nerd and proud of it.
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #30 on: November 16, 2020, 08:39:47 PM
I have been using the ST300 EOD blade on my Surge for sometime now and have found it to be incredibly useful, it is my most used tool in my Surge blade exchanger . The downside is that the blade exchanger will not hold the blade straight firmly enough for straight line cuts in aluminium or steel sheet. In addition although the Surge is a great tool it is large heavy and uncomfortable to wear on the waist, so my preference for EDC is my Charge tti.
So my aim is to change the saw blade on the Charge for a blade exchanger, this has proved to be very difficult, i have concluded that making my own is the only viable option. I have some 0.9mm (0.035" i am bilingual) titanium for the core but a suitable heat treatable steel for the sleave is proving to be more of a challenge. Have any of you engineers and craftsmen out there have any advice on solving this issue.  :think:  :dunno:
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿 and proud.

us Offline Aloha

  • Global Moderator
  • *
  • Point Of No Return
  • *
    • Posts: 31,235
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #31 on: November 16, 2020, 08:45:55 PM
Hi, yes Metro has added a BE from the Surge to his wonderful mod.  I chose to use the Wave for my Mini Surge BE mod.

I'll find a link for his mod, hold please. 
Esse Quam Videri
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least eight BO tools Start a new thread showing photos of your outdoor cooking Must have a review written in the proper format and posted on the Main Site Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a picture of fire making kit or fire with a multitool Start a thread with a photo of at least ten OPT's in your collection Start a thread with photos of at least 5 different Juice models in your collection Start a new thread with photos of a Japanese made PST in your collection

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,013
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #32 on: November 17, 2020, 12:09:19 AM
Quote from: Aloha on November 16, 2020, 06:06:00 PM
Heres a pretty good reference for which Tshank for which material. 
(Image removed from quote.)

Very useful pic, Aloha :salute: I now have it downloaded on my phone  :D :like:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #33 on: November 17, 2020, 06:30:47 AM
I am never a big fan of the blade changer system.. They works but are usually quite ill fitting. And that would mean carrying extras blades. Being the itchy handed me, I have different saw on my MT hard fixed. One fine and another medium duty metal saw.
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #34 on: November 17, 2020, 10:07:47 AM
Here
IMG_20201111_182117.jpg
* IMG_20201111_182117.jpg (Filesize: 67.94 KB)
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

us Offline Aloha

  • Global Moderator
  • *
  • Point Of No Return
  • *
    • Posts: 31,235
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #35 on: November 17, 2020, 04:00:07 PM
 :tu:.  Well done.  I've had great success with the blade changer.  The old Surge was a little wobbly but my new surge is very good.  Carrying the extra blades makes my sheath fatter for sure but for me the added carry is awesome when certain material is needed to be cut.  Plus its kinda fun to be able to add pvc or aluminum cutting blade with little effort. YEs I can get away with single saw for either but I have to ability to decide.   :tu:
Esse Quam Videri
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least eight BO tools Start a new thread showing photos of your outdoor cooking Must have a review written in the proper format and posted on the Main Site Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a picture of fire making kit or fire with a multitool Start a thread with a photo of at least ten OPT's in your collection Start a thread with photos of at least 5 different Juice models in your collection Start a new thread with photos of a Japanese made PST in your collection

gb Offline Fuzzbucket

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,585
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #36 on: November 17, 2020, 04:23:59 PM
Having a little hacksaw blade is immensely handy for me, for that reason only I love the blade exchanger. I wish they would develop/evolve it a bit more... and I was pretty disappointed that they didn't include something like it when they relaunched the Wave as the Wave +.
Merit Badges Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Post a picture and recipe for a batch of Chili that you have made Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo showing the axe in use Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must buy an item through the MTo Store

gb Offline Fuzzbucket

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,585
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #37 on: November 17, 2020, 04:24:47 PM
Merit Badges Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Post a picture and recipe for a batch of Chili that you have made Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo showing the axe in use Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must buy an item through the MTo Store

gb Offline John Worledge

  • Newbie
  • *
    • Posts: 23
  • Nerd and proud of it.
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #38 on: November 17, 2020, 07:50:18 PM
Quote from: Fuzzbucket on November 17, 2020, 04:23:59 PM
Having a little hacksaw blade is immensely handy for me, for that reason only I love the blade exchanger. I wish they would develop/evolve it a bit more... and I was pretty disappointed that they didn't include something like it when they relaunched the Wave as the Wave +.
Totally agree Fuzzbucket, if and when i manage to produce an effective t-bar blade exchanger for my Charge i will of course post with photos.
I have seen many folks who have done this on the Wave/Charge tools and also fitted scissors in the file slot. This i do not understand as a file is surely a necessity on a tool with a hacksaw.
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿 and proud.

gb Offline Fuzzbucket

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,585
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #39 on: November 17, 2020, 10:20:31 PM
Quote from: John Worledge on November 17, 2020, 07:50:18 PM
Totally agree Fuzzbucket, if and when i manage to produce an effective t-bar blade exchanger for my Charge i will of course post with photos.
I have seen many folks who have done this on the Wave/Charge tools and also fitted scissors in the file slot. This i do not understand as a file is surely a necessity on a tool with a hacksaw.

Very true.  :tu:
Merit Badges Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Post a picture and recipe for a batch of Chili that you have made Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo showing the axe in use Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must buy an item through the MTo Store

nz Offline zoidberg

  • Global Moderator
  • Point Of No Return
  • *
    • Posts: 37,754
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #40 on: November 17, 2020, 11:28:25 PM
Quote from: Fuzzbucket on November 17, 2020, 10:20:31 PM
Very true.  :tu:

T-shank file from the Surge.     :P     :)

gb Offline Fuzzbucket

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,585
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #41 on: November 17, 2020, 11:34:19 PM
Quote from: zoidberg on November 17, 2020, 11:28:25 PM
T-shank file from the Surge.     :P     :)

Yeah but... Well, yeah.
Merit Badges Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Post a picture and recipe for a batch of Chili that you have made Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo showing the axe in use Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must buy an item through the MTo Store

us Offline theonew

  • No Life Club
  • ******
    • Posts: 1,294
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #42 on: November 17, 2020, 11:38:32 PM
One of the things I like a lot about the Crunch is that I can get just about any type of saw blade to fit :D

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #43 on: November 18, 2020, 03:20:38 AM
I honestly think they just didn't want to do it so suckers will buy both the surge and wave. Like how they will not give you a perfect MT. I have one BE adapter from China that can be used and stow with the sawblade attached. Doesn't look nice but works.
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,013
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #44 on: November 18, 2020, 04:29:12 AM
Quote from: Sam Lim on November 18, 2020, 03:20:38 AM
I honestly think they just didn't want to do it so suckers will buy both the surge and wave. Like how they will not give you a perfect MT. I have one BE adapter from China that can be used and stow with the sawblade attached. Doesn't look nice but works.

 :iagree: :facepalm: :D
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,013
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #45 on: November 18, 2020, 04:29:42 AM
Quote from: theonew on November 17, 2020, 11:38:32 PM
One of the things I like a lot about the Crunch is that I can get just about any type of saw blade to fit :D

 :iagree: Very true :tu: :like:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,013
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #46 on: November 18, 2020, 04:30:08 AM
Quote from: zoidberg on November 17, 2020, 11:28:25 PM
T-shank file from the Surge.     :P     :)

zoidy :ahhh Great to see you :salute: :tu: :like:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

gb Offline John Worledge

  • Newbie
  • *
    • Posts: 23
  • Nerd and proud of it.
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #47 on: November 18, 2020, 03:52:05 PM
Quote from: zoidberg on November 17, 2020, 11:28:25 PM
T-shank file from the Surge.     :P     :)
Great tool though the Surge t-shank holder is it is too wide to be integrated in to the Charge and repeatedly changing tools during a job can be time consuming, may as well go and get your toolbox and put the multitool away. The blade exchanger mod i am intending to do on my Charge will be too narrow to accommodate the Surge file or saw, that may have to wait for the Super Knifeless Wave future project. For those that do not know the UK in blighted with draconian knife carry laws making a knifeless MT a vital carry option, for our North American cousins this is what happens when people are not allowed guns. The British must never be allowed guns, too mad by far.
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿 and proud.

us Offline Aloha

  • Global Moderator
  • *
  • Point Of No Return
  • *
    • Posts: 31,235
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #48 on: November 18, 2020, 03:59:15 PM
 :pok:
https://forum.multitool.org/index.php/topic,70393.msg1415815.html#msg1415815

While the skill needed are not beginner it is possible.
Esse Quam Videri
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least eight BO tools Start a new thread showing photos of your outdoor cooking Must have a review written in the proper format and posted on the Main Site Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a picture of fire making kit or fire with a multitool Start a thread with a photo of at least ten OPT's in your collection Start a thread with photos of at least 5 different Juice models in your collection Start a new thread with photos of a Japanese made PST in your collection

gb Offline John Worledge

  • Newbie
  • *
    • Posts: 23
  • Nerd and proud of it.
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #49 on: November 18, 2020, 07:39:18 PM
Quote from: Aloha on November 18, 2020, 03:59:15 PM
:pok:
https://forum.multitool.org/index.php/topic,70393.msg1415815.html#msg1415815

While the skill needed are not beginner it is possible.

Thanks Aloha, very interesting.
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿 and proud.

us Offline Aloha

  • Global Moderator
  • *
  • Point Of No Return
  • *
    • Posts: 31,235
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #50 on: November 19, 2020, 05:13:49 PM
Very welcome.  The BE is fairly easy to do on the Wave, given a modding noob like me did it  :tu:.  It was a fun build and its a great tool overall.   
Esse Quam Videri
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least eight BO tools Start a new thread showing photos of your outdoor cooking Must have a review written in the proper format and posted on the Main Site Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a picture of fire making kit or fire with a multitool Start a thread with a photo of at least ten OPT's in your collection Start a thread with photos of at least 5 different Juice models in your collection Start a new thread with photos of a Japanese made PST in your collection

us Offline genevabuck

  • No Life Club
  • ******
    • Posts: 1,074
Re: T-shank jigsaw holder - does it only exist on the Surge?
Reply #51 on: November 21, 2020, 05:07:07 PM
I just bought a set of metal cutting blades for my Surge. It seems that the 21 tooth per inch blades match up perfectly with the blade from the ST300 EOD, if anyone is interested.

Pages: 1 2   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $152.99
PayPal Fees: $8.68
Net Balance: $144.31
Below Goal: $155.69
Site Currency: USD
48% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal