Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
+-

Hello Lurker! Remove this ad by logging in.


Fitting kick pocket clip to a crunch problem 882

Absolute Zombie Club Posts: 20,576
Fitting kick pocket clip to a crunch problem
« on: January 25, 2018, 06:18:11 PM »
Got my kick pocket clip and screw from Loki-mobile yesterday
So got round to have a go today trying it on my LM crunch
But the screws are a different the crunch screw is course thread
And the kick screw is fine thread  :rofl:
I really want the kick screw as the head is bigger to cover the kick clip
And the crunch screw is the same size as the kick clip hole so won't stay?
So what are my options ? a screw sleeve from a other LM maybe
Any help much appreciated
I have seen LM crunches with the kick clip and kick screw fitted  :ahhh



fail to prepare prepare to fail
Zombie Apprentice Posts: 17,249 Oxygen and magnesium toghether?! OMg!
Re: Fitting kick pocket clip to a crunch problem
« Reply #1 on: January 25, 2018, 06:33:28 PM »
Got my kick pocket clip and screw from Loki-mobile yesterday
So got round to have a go today trying it on my LM crunch
But the screws are a different the crunch screw is course thread
And the kick screw is fine thread  :rofl:
I really want the kick screw as the head is bigger to cover the kick clip
And the crunch screw is the same size as the kick clip hole so won't stay?
So what are my options ? a screw sleeve from a other LM maybe
Any help much appreciated
I have seen LM crunches with the kick clip and kick screw fitted  :ahhh

Is there a hardware shop nearby that might have the screws you need?

 :think: :think:

________________________________
It is just a matter of time before they add the word “Syndrome” after my last name.

I don't have OCD, I have OCDEFGHIJKLMNOPQRSTUVWXYZ.

Eff the ineffable, scrut the inscrutable.

IYCRTYSWTMTFOT

No Life Club Posts: 1,369
Re: Fitting kick pocket clip to a crunch problem
« Reply #2 on: January 25, 2018, 06:39:45 PM »
I think you will need the original kick pivot screw for the clip's screw to work. It have a pre threaded hole for the clip's screw. I dun think just by using the crunch's pivot screw and and screw will work properly. U will probably not be able to balance the tightness of the internal implement with the wobbiness of the clip..
Absolute Zombie Club Posts: 20,576
Re: Fitting kick pocket clip to a crunch problem
« Reply #3 on: January 25, 2018, 06:54:30 PM »
Got my kick pocket clip and screw from Loki-mobile yesterday
So got round to have a go today trying it on my LM crunch
But the screws are a different the crunch screw is course thread
And the kick screw is fine thread  :rofl:
I really want the kick screw as the head is bigger to cover the kick clip
And the crunch screw is the same size as the kick clip hole so won't stay?
So what are my options ? a screw sleeve from a other LM maybe
Any help much appreciated
I have seen LM crunches with the kick clip and kick screw fitted  :ahhh

Is there a hardware shop nearby that might have the screws you need?

 :think: :think:

Hi no not for screws that look like the LM ones
Only normal type fastners!!
                                             :think:
I think you will need the original kick pivot screw for the clip's screw to work. It have a pre threaded hole for the clip's screw. I dun think just by using the crunch's pivot screw and and screw will work properly. U will probably not be able to balance the tightness of the internal implement with the wobbiness of the clip..

I agree i was thinking of a pivot screw from a LM kick or other LM maybe  :like:

fail to prepare prepare to fail
No Life Club Posts: 1,369
Re: Fitting kick pocket clip to a crunch problem
« Reply #4 on: January 25, 2018, 07:00:19 PM »
Got my kick pocket clip and screw from Loki-mobile yesterday
So got round to have a go today trying it on my LM crunch
But the screws are a different the crunch screw is course thread
And the kick screw is fine thread  :rofl:
I really want the kick screw as the head is bigger to cover the kick clip
And the crunch screw is the same size as the kick clip hole so won't stay?
So what are my options ? a screw sleeve from a other LM maybe
Any help much appreciated
I have seen LM crunches with the kick clip and kick screw fitted  :ahhh

Is there a hardware shop nearby that might have the screws you need?

 :think: :think:

Hi no not for screws that look like the LM ones
Only normal type fastners!!
                                             :think:
I think you will need the original kick pivot screw for the clip's screw to work. It have a pre threaded hole for the clip's screw. I dun think just by using the crunch's pivot screw and and screw will work properly. U will probably not be able to balance the tightness of the internal implement with the wobbiness of the clip..

I agree i was thinking of a pivot screw from a LM kick or other LM maybe  :like:

Simplest, cheapest way, get a kick and scrutinise that particular screw. I would like to think the pivot screw on the wingman/sidekick series on the pocket clip side should also work. They are the same dia. And torx are easier to work with than knurled screw!
Absolute Zombie Club Posts: 20,576
Re: Fitting kick pocket clip to a crunch problem
« Reply #5 on: January 26, 2018, 07:11:24 PM »
Apart from the thread pitch being different  :bnghd:
It's a 5mm thick pivot just like the wave scissors have
So hopefully other LM multitools might work? as long
It's got the same thread pitch as the LM kick  :think:
Length if longer is fine as it can be cut down to size  :ahhh
                                                                         

fail to prepare prepare to fail
Global Moderator Abandon All Hope Ye Who Enter Here... Posts: 46,936
Re: Fitting kick pocket clip to a crunch problem
« Reply #6 on: February 02, 2018, 02:15:55 AM »
Any progress on this :whistle: I hope you have found a way to do this :salute:

Absolute Zombie Club Posts: 20,576
Re: Fitting kick pocket clip to a crunch problem
« Reply #7 on: February 02, 2018, 01:59:37 PM »
Hi yes I got loki-mobile looking for one at the moment
He found one that looks good, but I'm waiting for a pm to let me know
How long the pivot is  :think:
Hopefully soon than I can show some photos with the clip fitted  :tu:

fail to prepare prepare to fail
No Life Club Posts: 1,083
Re: Fitting kick pocket clip to a crunch problem
« Reply #8 on: February 03, 2018, 07:29:58 AM »
G'Day,

As far as I know you will need the original Kick pivot bolt too. The clip is designed to screw into the threaded Kick pivot when you add the clip.

Have a look at this thread: https://forum.multitool.o...g/index.php?topic=42112.0

Pete
Jr. Member Posts: 80
Re: Fitting kick pocket clip to a crunch problem
« Reply #9 on: February 03, 2018, 11:08:40 AM »
lf the original Crunch splined head fits the Kick pocket clip you can do what l did when l added one to  PST.
Basically  l drilled and tapped the orignal pivot (the long part) using the original thread type.
l then purchased a stainless button head torx screw and used this to hold the clip in place.
lts a bit more work but at least l didn't have to waste a Kick.
Cheers
George
Absolute Zombie Club Posts: 20,576
Re: Fitting kick pocket clip to a crunch problem
« Reply #10 on: February 03, 2018, 01:17:15 PM »
Hi thanks for your reply  :like:
G'Day,

As far as I know you will need the original Kick pivot bolt too. The clip is designed to screw into the threaded Kick pivot when you add the clip.

Have a look at this thread: https://forum.multitool.o...g/index.php?topic=42112.0

Pete
lf the original Crunch splined head fits the Kick pocket clip you can do what l did when l added one to  PST.
Basically  l drilled and tapped the orignal pivot (the long part) using the original thread type.
l then purchased a stainless button head torx screw and used this to hold the clip in place.
lts a bit more work but at least l didn't have to waste a Kick.
Cheers
George

This is what I got coming from loki-mobile :tu:


fail to prepare prepare to fail
Global Moderator Point Of No Return Posts: 35,227
Re: Fitting kick pocket clip to a crunch problem
« Reply #11 on: February 04, 2018, 04:44:17 AM »
 :tu:
Global Moderator Point Of No Return Posts: 31,565
Re: Fitting kick pocket clip to a crunch problem
« Reply #12 on: February 04, 2018, 04:58:51 AM »
:popcorn:
Absolute Zombie Club Posts: 20,576
Re: Fitting kick pocket clip to a crunch problem (Update)
« Reply #13 on: February 09, 2018, 07:27:47 PM »
The pivot screw came in the post today  :mail:
I don't know what model LM the pivot screw came off
But the pivot that holds the tools is 13.6mm in length
And the pivot from the LM crunch is 12.6mm in length
After filing off 1mm from the pivot that holds the tools
I Than had to file the head a bit thinner
from 1.10mm to 0.85mm
This is as the thickness of the kick clip is 1.02mm
So the kick screw wasn't stoping the kick clip from rattling
About without making the head thinner
I didn't have to change or use a file on the LM crunch
So can still be returned to standard  :tu:
« Last Edit: February 09, 2018, 07:36:36 PM by Wspeed »

fail to prepare prepare to fail
Global Moderator Abandon All Hope Ye Who Enter Here... Posts: 46,936
Re: Fitting kick pocket clip to a crunch problem
« Reply #14 on: February 09, 2018, 09:48:09 PM »
Very nice 8) Would definitely make me want to carry the crunch more :like: :like:

No Life Club Posts: 3,270
Re: Fitting kick pocket clip to a crunch problem
« Reply #15 on: February 09, 2018, 10:00:02 PM »
That looks alright that does! It really suits a clip... (wait for It, wait for it)... nice one!!!  :salute:

No Life Club Posts: 2,629
Re: Fitting kick pocket clip to a crunch problem
« Reply #16 on: February 09, 2018, 10:13:48 PM »
:imws:, both of them :2tu:

Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Global Moderator Point Of No Return Posts: 31,565
Re: Fitting kick pocket clip to a crunch problem
« Reply #17 on: February 09, 2018, 10:28:42 PM »
Very nice addition  :like: :tu:
Absolute Zombie Club Posts: 20,576
Re: Fitting kick pocket clip to a crunch problem
« Reply #18 on: February 09, 2018, 10:37:51 PM »
Thanks everyone  :2tu:
It looks like it's made for the crunch  :like:

fail to prepare prepare to fail
No Life Club Posts: 1,083
Re: Fitting kick pocket clip to a crunch problem
« Reply #19 on: February 11, 2018, 08:45:54 AM »
That looks really nice.

Does it wear comfortably in your pocket?

Cheers

Pete
Absolute Zombie Club Posts: 20,576
Re: Fitting kick pocket clip to a crunch problem
« Reply #20 on: February 11, 2018, 12:21:39 PM »
Hi yes got it in the right hand front pocket
You would almost forget it's there  :tu:

fail to prepare prepare to fail
Absolute Zombie Club Posts: 20,576
Re: Fitting kick pocket clip to a crunch problem
« Reply #21 on: February 18, 2018, 06:31:10 PM »
Update pic
Wearing the pocket crunch :salute:

fail to prepare prepare to fail
No Life Club Posts: 3,270
Re: Fitting kick pocket clip to a crunch problem
« Reply #22 on: February 18, 2018, 06:47:39 PM »
Looks great!  :salute:

Absolute Zombie Club Posts: 20,576
Re: Fitting kick pocket clip to a crunch problem
« Reply #23 on: February 18, 2018, 06:56:44 PM »
Thanks Fuzzy  :tu:
I don't even know that I am wearing the pocket crunch  :salute:

fail to prepare prepare to fail
Zombie Apprentice Posts: 13,742 Firm believer of Sturgeon's Law
Re: Fitting kick pocket clip to a crunch problem
« Reply #24 on: February 18, 2018, 07:04:56 PM »
Update pic
Wearing the pocket crunch :salute:

neat!   :like:

My toys:

MTs: Surge (2x), Skeletool CX, Rebar, Blast, Fuse, Micra, Squirt (3x), Wave, Crunch, Mini, Spirit (2x), Pro Scout, MP700 (2x), Diesel, Powerlock, PowerPlier (2x), PocketPowerPlier, Blacktip , ST6 (2x), 5WR, A100

SAKs: Bantam, Executive, Ambassador, Minichamp, Classic Alox, Champion, Farmer, Explorer, Swisschamp, Golf Tool, Wenger Champ, EVO 52, Pocket Tool Chest
Absolute Zombie Club Posts: 20,576
Re: Fitting kick pocket clip to a crunch problem
« Reply #25 on: February 18, 2018, 07:19:57 PM »
Thanks ThePeacent  :tu:

fail to prepare prepare to fail
Global Moderator Point Of No Return Posts: 35,227
Re: Fitting kick pocket clip to a crunch problem
« Reply #26 on: February 18, 2018, 09:15:33 PM »
 :like:
Absolute Zombie Club Posts: 20,576
Re: Fitting kick pocket clip to a crunch problem
« Reply #27 on: February 18, 2018, 09:19:56 PM »
Thanks Zoidberg  :tu: :like:

fail to prepare prepare to fail

 

Operational Funds

Keep the Unworkable working! Donate with PayPal!
November Goal: $275.00
Due Date: Nov 30
Total Receipts: $195.00
PayPal Fees: $11.61
Net Balance: $183.39
Below Goal: $91.61
Site Currency: USD
67% 
November Donations

Community Links

Powered by EzPortal
© 2017 Defender Web & Tool